User's Manual

User Manual
1. Start the Vehicle’s engine without the VRFM8BLN in the cigarette lighter socket. Starting the
engine with the VRFM8BLN pluged in may cause it damage. Then plug the 12 Voltage end of the
VRFM8BLN Modulator into the vehicle’s 12 Voltage cigarette lighter socket or 12 Volt Power
Outlet.
2. The Red Power LED will light up indicating the unit has power and the LED for the radio
frequency will show 88.1, the first FM pre-set radio frequency.
3. Insert a USB flash drive with MP3/WMA audio files that do not have Digital Rights
Management with a bitrate of 128 Kb per second or less. Save the files on the disk “loose” and not
in folders.
4. Press the Channel Button to select one of the following 12 FM Presets that is not being used by
any local radio stations. VRFM8BLN remembers the last broadcast frequency used 88.1, 88.3,
88.5, 88.7, 88.9, 106.7, 106.9, 107.1, 107.3, 107.5, 107.7, 107.9.
5. Press the Play/Pause/Shuffle button to play the first MP3/WMA file on the flash drive. The Red
LED will flash to indicate the MP3/WMA player is working. Press and hold the
Play/Pause/Shuffle to play files in shuffle mode, files will play at random in shuffle mode.
6. Press the Next Track/Volume Up Button once to advance the to the next track. Pressing and
holding this button will increase the volume of the MP3/WMA files being played. Too high a
volume will cause distortion. If you hear distortion, decrease the volume on the VRFM8BLN, and
then increase the radio’s volume.
7. Press the Previous Track/Volume Down Button once to return to the previous MP3/WMA file
played. Pressing and holding this button will decrease the volume of the MP3/WMA file being
played.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC NOTE:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate the
equipment.