Datasheet

RND is a trademark of Distrelec

Features

Peltier Element

Specification

Hot Side Temperature

25 °C

Qmax 28.7 W

Imax 6 A

Vmax

8.1 V

Module Resistance 1.23 Ohm

Delta Tmax 67 °C

50 °C

31.4 W

6 A

9.2 V

1.4 Ohm

75 °C

Performance Curves Th=25 °C

Performance Curves Th=50

°C

Tolerances for thermal and electrical parameters ± 10%

• The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat

when voltage is applied

• When supplied with a suitable electric current, they can either cool or heat

• Suited for cooling miniature electronic components such as infra-red detector chips,

microwave IC's, fibre-optic lasers and detectors

• Solid-state long term stability

PAGE 1
Peltier Element Features • The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied • When supplied with a suitable electric current, they can either cool or heat • Suited for cooling miniature electronic components such as infra-red detector chips, microwave IC's, fibre-optic lasers and detectors • Solid-state long term stability Specification Hot Side Temperature Qmax Delta Tmax Imax Vmax Module Resistance 25 °C 28.7 W 67 °C 6A 8.1 V 1.23 Ohm 50 °C 31.
PAGE 2
Peltier Element Mechanical Drawing Operation Tips • Max Operating Temperature: 90℃ • Do not exceed Imax or Vmax when operating module • Please consult RND for moisture and corrosion protection options Art Nr.