Metallized Polypropylene Film Capacitors (Dipped) Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.
Metallized Polypropylene Film Capacitors (Dipped) Part Number Codes RND 150H M P P 3 A 1 P 1 0 K 0 I 2 0 0 1. 1-3 Type of Capacitor: TYPE MKP MEF MPP CODE MKP MEF MPP 2. 4-6 Rated Voltage: 063: 63VDC/JIS 1J. 100: 100VDC/JIS 2A. 250: 250VDC/JIS2E. 400: 400VDC/JIS 2G. 630: 630VDC/JIS 2J. 1K0: 1,000VDC/JIS 3A. 1K6: 1,600VDC/JIS 3C. 1N0: 10,000VDC/JIS 4A. 2A7: 275VAC 3A1:310VAC. 3. 7-9 Symbols of Capacitance in uF: A: Indicates tens. EX: 12uF=A12, 10uF=A10. W(Word): Indicates unit. EX: 1.
Metallized Polypropylene Film Capacitors (Dipped) Dimensions(mm) Rated Cap. W H max max 100/160VDC T P ±0.05 max ±0.05 max max max ±1.0 ±0.05 4700pF 13.0 9.0 5.0 10.0 0.6 5600pF 13.0 9.5 5.0 10.0 0.6 13.0 10.0 5.0 10.0 0.6 13.0 11.0 5.5 10.0 0.6 6800pF 12.0 7.5 max 4.0 ±1.0 10.0 W H ±0.05 max max 630VDC T P H max d 400VDC T P W ±1.0 W 200/250VDC H T P d max d max ±1.0 0.6 8200pF d 0.010uF 12.0 8.0 4.5 10.0 0.6 12.0 8.0 4.5 10.0 0.
Metallized Polypropylene Film Capacitors (Dipped) Construction of Component Metalized layer Polypropylene film Item 1 2 Component Element Metal spray layer 3 Leads 4 Coating 5 Marking Material RoHS Requirements Metallized OPP film Compliant with RoHS Zn and Zn-Tin alloy wire Compliant with RoHS Tinned copper-base alloy wire Flame retardant epoxy resin(UL940V) Inks Compliant with RoHS Compliant with RoHS Compliant with RoHS Laser Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, S
Metallized Polypropylene Film Capacitors (Dipped) 2. Technical Specification No. Test item Performance Ref 4.2.1 clause Withstand voltage 1 2 Apply 150% of rated voltage / 60sec (T-T) Terminal case Insulation resistance No permanent breakdown or flashover CR≤0.33μf ;IR>30000MΩ CR>0.33μf 3 Capacitance 4 Dissipation factor Test method (refer to IEC60384-16) ; IR>10000S J±5%;K±10%;M±20% Apply 200% of rated voltage for 2 to 5 sec. Ref 4.2.
Metallized Polypropylene Film Capacitors (Dipped) 2. Technical Specification No. 7 Test item Resistance to Solder heat Performance There should be no visible damage, ΔC/C<±3% Test method (refer to IEC60384-16) Ref 4.4 clause Tb , method 1A Solder temperature 260±5℃ Immersion time:10±1sec Initial measurement Capacitance, Tanδ Rapid change of There should be no visible temperature damage, Ref 4.6 clause θA=-40℃, θB=-+85℃ Duration=30min Ref 4.
Metallized Polypropylene Film Capacitors (Dipped) 2. Technical Specification No. 8 Test item Final measurement Performance Test method (refer to IEC60384-16 Increase of Tanδ CR≤1uf: ≤0.0015 IR>50% *Rate value Initial measurement Ref 4.10clause Dry heat +85℃, 16h Cold -40℃,2h Damp heat, cyclic Test Db, remaining cycles 9 There should be no visible damage, legible marking. Final measurement Capacitance change ΔC/C<±3% Increase of Tanδ CR≤1uf: ≤0.
Metallized Polypropylene Film Capacitors (Dipped) 2. Technical Specification No. Test item Performance Test method (refer to IEC60384-16 ) There should be no visible damage, legible marking. 11 Endurance Capacitance change ΔC/C≤3% Increase of Tanδ: Ref 4.12 clause (1.25*UR)at 105℃,1000h CR≤1uf: ≤0.002 IR>50% *Rate value Ref 4.13 clause Capacitance change ΔC/C≤3% Increase of Tanδ: 12 Charge and discharge CR≤1uf: ≤0.003 IR>50% *Rate value Times: 10000 Duration of charge: 0.
Metallized Polypropylene Film Capacitors (Dipped) Characteristic Curve Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.
Metallized Polypropylene Film Capacitors (Dipped) Characteristics Reference Soldering Temperature VS Time o C 270 260 250 240 230 220 o C 270 260 250 240 230 220 PE GOOD 中达电子 0 1 2 3 4 5 6 7 8 9 10 Sec. PP GOOD 0 1 2 3 4 5 6 7 8 9 10 Sec. Frequency Characteristics ΔC/C(%) +1 0 -1 -2 -3 -4 -5 -6 -7 DF(%) 10 PP PE 1.0 PP PE 101 102 103 104 105 Hz 0.1 0.01 101 102 103 104 105 Hz Temperature Characteristics ΔC/C(%) at 1KHz DF(%) at 1KHz 1.2 +10 PE +5 1.0 0.8 0 0.6 PP -5 PE 0.