Datasheet

No.
Test item Performance
Test method (refer to IEC60384-14 )
11
Damp heat steady state
C
R
≤1uf: ≤0.008 (10khz)
C
R
>1uf: ≤0.005 (1khz)
Dielectric strength: there shall be no
permanent breakdown or flashover.
IR>50% *Rate value
12
Impulse voltage
There are three or more waveforms which
indicate that no self-healing breakdown or
flashover have occurred when it’s
monitored by the monitor
Ref 4.13 clause
C
R
≤1uf: Up
=2.5KV
C
R
>1uf:
Up=
Each dividual capacitor shall be
subjected to 24 times impulse of the
same polarity (when any three
successive impulses are shown by
monitor to have a waveform
indicating that no self-healing
breakdown have taken place , the
impulses can be stopped),the times
between the impulses shall not be
less than 10sec, and the peak
of the impulse voltage is :
C
R
≤1uf: Up=2.5KV
C
R
>1uf: Up=
Metallized Polypropylene Film
Interference Suppression Capacitors
2. Technical Specification
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com