Datasheet

ManualsBrandsRND Components ManualsCapacitorsCeramic Capacitor 330nF 50VDC 0805

Table Of Contents

SPECIFICATION:

Construcon form 0805

Ceramic type X7R

Dimensions L x H x W 2.0 x 1.25 x 1.25 mm

Temperature range

-55...+125 °C

Height 1.25 mm

Length 2.0 mm

Width 1.25 mm

Multilayer Capacitors, SMD

Multilayer Ceramic Capacitors, 0805, X7R

PRODUCT RANGE:

Art. Nr. Capacitance Rated voltage Capacitance tolerance

RND 150-0805B101K101NT 100 pF 100 VDC ±10%

RND 150-0805B101K201NT 100 pF 200 VDC ±10%

RND 150-0805B101K500NT 100 pF 50 VDC ±10%

RND 150-0805B102J500NT 1.0 nF 50 VDC ±5%

RND 150-0805B102K101NT 1.0 nF 100 VDC ±10%

RND 150-0805B102K201NT 1.0 nF 200 VDC ±10%

RND 150-0805B102K500NT 1.0 nF 50 VDC ±10%

RND 150-0805B103J500NT 10 nF 50 VDC ±5%

RND 150-0805B103K101NT 10 nF 100 VDC ±10%

RND 150-0805B103K201NT 10 nF 200 VDC ±10%

RND 150-0805B103K500NT 10 nF 50 VDC ±10%

RND 150-0805B104J500NT 100 nF 50 VDC ±5%

RND 150-0805B104K101N3 100 nF 100 VDC ±10%

RND 150-0805B104K160NT 100 nF 16 VDC ±10%

RND 150-0805B104K250NT 100 nF 25 VDC ±10%

RND 150-0805B104K500NT 100 nF 50 VDC ±10%

RND 150-0805B105K100N3 1.0 µF 10 VDC ±10%

RND 150-0805B105K160N3 1.0 µF 16 VDC ±10%

RND 150-0805B105K250N3 1.0 µF 25 VDC ±10%

RND 150-0805B106K063N3 10 µF 6.3 VDC ±10%

RND 150-0805B122K500NT 1.2 nF 50 VDC ±10%

RND 150-0805B123K500NT 12 nF 50 VDC ±10%

RND 150-0805B124K160NT 120 nF 16 VDC ±10%

RND 150-0805B124K250NT 120 nF 25 VDC ±10%

RND 150-0805B151K201NT 150 pF 200 VDC ±10%

RND 150-0805B151K500NT 150 pF 50 VDC ±10%

RND 150-0805B152K101NT 1.5 nF 100 VDC ±10%

RND 150-0805B152K500NT 1.5 nF 50 VDC ±10%

RND 150-0805B153K500NT 15 nF 50 VDC ±10%

RND 150-0805B154K160NT 150 nF 16 VDC ±10%

RND 150-0805B154K250N3 150 nF 25 VDC ±10%

Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.com

Summary of content (6 pages)

PAGE 1
Multilayer Capacitors, SMD Multilayer Ceramic Capacitors, 0805, X7R SPECIFICATION: Construction form Ceramic type Dimensions L x H x W Temperature range Height Length Width PRODUCT RANGE: Art. Nr.
PAGE 2
Art. Nr.
PAGE 3
Art. Nr. RND 150-0805B682K101NT RND 150-0805B682K500NT RND 150-0805B683K101N3 RND 150-0805B683K250NT RND 150-0805B683K500NT RND 150-0805B821K500NT RND 150-0805B823K500NT Capacitance 6.8 nF 6.8 nF 68 nF 68 nF 68 nF 820 pF 82 nF Rated voltage 100 VDC 50 VDC 100 VDC 25 VDC 50 VDC 50 VDC 50 VDC Capacitance tolerance ±10% ±10% ±10% ±10% ±10% ±10% ±10% Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.
PAGE 4
Multilayer Ceramic Capacitors, 0402, Y5V PCB design Chip components are susceptible to board stress since the component itself is mounted directly on the board. They are also sensitive to mechanical and thermal stress when solder, which may cause chip cracked. Please take solder form and component layout into consideration to eliminate stress. Pattern form (1) Placing of chip components and component. incorrect correct (2) Placing close to chassis.
PAGE 5
(4) Lateral mounting correct incorrect Component direction To design a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. (1) put the component lateral to the direction in which stress acts. (2) Component layout close to board separation point.
PAGE 6
12.3. Land Pattern When capacitors are mounted on P.C. board, the amount of solder directly affect the performance of capacitors. Therefore, the following items should be carefully considered in the design of solder land pattern. (1) The greater the amount of solder, the higher the stress on the chip capacitors, and lead to cracking and breaking likely. It is necessary the appropriate size and configuration of the solder pads should be designed to have proper amount of solder on the termination.