Datasheet

SPECIFICATION:

Construcon form 0402

Ceramic type X5R

Dimensions L x H x W 1.0 x 0.5 x 0.5 mm

Temperature range

-55...+8

5 °C

Height 0.5 mm

Length 1.0 mm

Width 0.5 mm

Multilayer Capacitors, SMD

Multilayer Ceramic Capacitors, 0402, X5R

PRODUCT RANGE:

Art. Nr. Capacitance Rated voltage Capacitance tolerance

RND 150-0402X104K063NU 100 nF 6.3 VDC ±10%

RND 150-0402X104K100NU 100 nF 10 VDC ±10%

RND 150-0402X105K063NU 1.0 µF 6.3 VDC ±10%

RND 150-0402X105K100NU 1.0 µF 10 VDC ±10%

RND 150-0402X224K063NU 220 nF 6.3 VDC ±10%

RND 150-0402X273K160NU 27 nF 16 VDC ±10%

RND 150-0402X333K160NU 33 nF 16 VDC ±10%

RND 150-0402X473K160NU 47 nF 16 VDC ±10%

RND 150-0402X474K063NU 470 nF 6.3 VDC ±10%

RND 150-0402X563K100NU 56 nF 10 VDC ±10%

RND 150-C0402X104K100NU 100 nF 10 VDC ±10%

RND 150-C0402X104K160NU 100 nF 16 VDC ±10%

RND 150-C0402X104K250NU 100 nF 25 VDC ±10%

RND 150-C0402X105K100NU 1.0 µF 10 VDC ±10%

RND 150-C0402X224K160NU 220 nF 16 VDC ±10%

Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T +41 44 944 99 11, info@distrelec.com, distrelec.com

PAGE 1
Multilayer Capacitors, SMD Multilayer Ceramic Capacitors, 0402, X5R SPECIFICATION: Construction form Ceramic type Dimensions L x H x W Temperature range Height Length Width PRODUCT RANGE: Art. Nr.
PAGE 2
Multilayer Ceramic Capacitors, 0402, Y5V PCB design Chip components are susceptible to board stress since the component itself is mounted directly on the board. They are also sensitive to mechanical and thermal stress when solder, which may cause chip cracked. Please take solder form and component layout into consideration to eliminate stress. Pattern form (1) Placing of chip components and component. incorrect correct (2) Placing close to chassis.
PAGE 3
(4) Lateral mounting correct incorrect Component direction To design a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board. (1) put the component lateral to the direction in which stress acts. (2) Component layout close to board separation point.
PAGE 4
12.3. Land Pattern When capacitors are mounted on P.C. board, the amount of solder directly affect the performance of capacitors. Therefore, the following items should be carefully considered in the design of solder land pattern. (1) The greater the amount of solder, the higher the stress on the chip capacitors, and lead to cracking and breaking likely. It is necessary the appropriate size and configuration of the solder pads should be designed to have proper amount of solder on the termination.