Datasheet

Bi-Colour SMD LED,
Red & Green
Features
Device Selection Guide
Part No. Emitting Color Lens Color
RND 135-00247
Water Clear
Absolute Maximum Ratings at Ta=25℃
Descriptions:
 Much smaller than lead frame type components, thus enable smaller board size, higher packing
density, reduced storage space and finally smaller equipment to be obtained.
 Besides, lightweight makes them ideal for miniature applications, etc.
 Compatible with automatic placement equipment.
 Compatible with infrared and vapor phase reflow solder process.
 Bi-color type.
 Color:Deep Red & Yellow Green.
 The product itself will remain within RoHS compliant version.
Applications:
 Backlighting in dashboard and switch.
 Telecommunication: Indicator and backlighting in telephone and fax.
 Flat backlight for LCD, switch and symbol.
 General use.
Red
Yellow Green
Notes:
a. Derate linearly as shown in derating curve.
b. Duty Factor = 10%, Frequency = 1 kHz
Parameters Symbol Emitting Color Max. Unit
Power Dissipation PD
Red 60
mW
Yellow Green 60
Peak Forward Currentt
(a)
IFP
Red 100
mA
Yellow Green 100
Continuous Forward Current
(b)
IF
Red 25
mA
Yellow Green 25
Reverse Voltage VR 5 V
Electrostatic Discharge (HBM) ESD
Red 2000 V
Yellow Green 2000 V
Operating Temperature Range Topr
-40℃ to +80℃
Storage Temperature Range Tstg
-40℃ to +85℃
Soldering Temperature Tsld
260℃ for 5 Seconds
Distrelec Schweiz AG, Grabenstrasse 6, 8606 Nänikon, Switzerland, T [phone], [e-mail], distrelec.com