A Quick Start Guide Guide de démarrage rapide Guía de Inicio Rápido
Overview WARNING: See safety information included with the device for warnings and precautions. To maximize battery life, plug in the navigation unit for the first 2 hours of use. Always make sure your GPS has a clear view of the sky. The first time you use the device, it may take up to 15 minutes for your GPS to connect to the satellites. TO POWER THE DEVICE: BATTERY POWER INDICATOR: On Press and hold the Power Key for two (2) seconds. (Device powers on in 5 seconds.
Power Key Battery Power Indicator PHOTO TO COME NOTE: Use the Reset button (located on the side of the device) to restore factory settings and restart the device.
Install the Mount NOTE: Follow all local regulations governing the placement of the mount. Select an area with a line of sight to the sky and GPS satellites to ensure reliable GPS information. 1. Clean and dry the mounting area. 2. Remove the suction cup protective film. 3. Adjust the angle of the mount using the thumbscrew. 4. Pull the suction cup lever up to release suction. 5. Place and hold the mount suction cup against the mounting surface. 6.
Main Menu 1 Enter truck information and access truck-specific use tools. 2 Show location on the map and view navigation instructions. 3 Change driver status. 4 Choose a destination. 5 Select TND™ and route preferences. 6 Mute/unmute the speaker. 7 Adjust speaker volume. 8 Select the trailer load option. 9 Indicates power status. 9 1 5 8 4 6 NOTE: From other screens, tap this icon in the bottom right corner to return to the Main Menu.
Enter Truck Information and Set Warnings 1. Tap Truck Tools > Truck Info or Warnings. 2. Tap 3. Tap the option button to be changed. 4. Enter new settings. 5. Tap Back to save changes. and to view all options. On the left, tap on an option On the right, enter settings for the option NOTE: See page 15 for Routing Options. Route to a Destination Address 1. Tap Choose Destination > New Location. 2. Tap Address.
Route to a Destination (Continued) 3. Enter the name of the city. (Note: As you type, the keyboard displays only the next possible letter. Prompts appear in the top bar. Tap the name to select. Or, tap List to view cities beginning with the letter(s) you entered. You can also use Zip Code Search.) 4. Enter the street name. (Note: Tap Expand Search to…?) 5. Enter the house number. (Note: Tap ABC to enter letters.) See Confirm Destination Window (page 7).
Confirm Destination Window 1 Destination address. 2 Begin route to destination. 3 Cross reference to printed Rand McNally Motor Carriers’ Road Atlas. 4 Return to previous window. 5 View the map. 6 Change the starting address for a route to the location displayed on the map screen. 7 Return to Main Menu. 8 Save the location to the Address Book. 9 Add the location as a via point on the way to a previously entered destination.
Find a Point of Interest (POI) 1. Tap Choose Destination > Points of Interest. 2. Select a search type (My Truck, City, My Route, End of Day or Destination). 3. Select a category and, if necessary, a subcategory. 4. Tap on the Point of Interest in the displayed list. Google Search 1. 2. 8 Tap Choose Destination > Google Search.
Route Map Window 1 Repeat spoken next-maneuver instructions. 2 Name of street you will turn onto next. 3 Show arrival time and remaining distance. 4 Directions list slideout. 5 Zoom in/zoom out. 6 Tap to view the Traffic Window. 7 Current speed limit. 8 Tap on the current speed to display the Virtual Dashboard. 9 Additional current location or route options. 10 Tap to view current road name, upcoming cross road name, or city name and state.
Junction View When on a route, Junction View displays when you have an upcoming maneuver. Once past the maneuver, Junction View closes and the previous window displays. 1 The highway you are currently on. 2 The highway you will be on after the next maneuver. 3 Number and direction of lanes for the next maneuver. 4 Miles to the upcoming maneuver. Distance decreases as you approach the ramp. 5 Return to Route Map Window.
Weather 1. To view current weather information and the three-day forecast for your location, tap the Weather icon [show image?] on the Route Map Window. 2. To view weather information at your destination, tap At Destination. [What about along the route?] 3. Tap Map Overlay to choose from different weather types to display on the map as you drive. 4. Use the slider at the bottom left of the Weather Type screen to adjust the transparency of the overlay on the map.
Virtual Dashboard When using the virtual dashboard on a route, the virtual dashboard closes and the Junction View displays an upcoming maneuver. Once past the maneuver, the virtual dashboard redisplays. 12 1 Current direction of travel. 2 Displays current time at the yard, current location and your destination. 2 1 3 4 8 9 5 6 3 Sunrise/Sunset time based on vehicle location (latitude/longitude) and day. 4 Current speed (above) and posted speed limit (below). 5 Altitude at current location.
View Timers and Logs Countdown timers are controlled by the Driver Status (Driving, On Duty, or Off Duty) selected on the Main Menu. 1. Tap Truck Tools > Timers, Logs, Trails, Fuel. 2. Tap Timers to view timers, odometer readings, and times. 3. Tap on a field to change or reset the number. 4. Tap Logs to view a list of mileage logs by quarter. 5. Tap on a quarter to view individual logs by state.
View Trails and Fuel 1. Tap Truck Tools > Timers, Logs, Trails, Fuel. 2. Tap Set Trails to record a “bread-crumb” path of GPS coordinates where your truck has traveled. 3. Tap any record to view the trail, edit the name or set the color. 4. Tap Keep on Map to display the trail on the Route Map Window. 5. Tap Fuel to view a list of fuel logs by quarter. 6. Tap on a quarter to view individual logs by state. 7. Tap Add Fuel to record the date, location and cost of fuel purchase. 8.
Set Routing and Device Options 1. Tap Preferences. 2. Tap the Truck, Route or Device tab. 3. Tap 4. Tap the option button to be changed. 5. Enter the new settings for the option. and to view options. On the left, tap on an option On the right, enter settings for the option 10. Tap Back to save changes and return to the Main Menu.
Warnings, Disclaimers and End-User License Agreement Pay attention to road conditions and street signs, and obey all traffic and safety laws. Traffic laws and current traffic conditions must always be observed and take precedence over the instructions issued by the TND™ product navigation system. The User should be aware of situations where current traffic conditions and the instructions from the navigation system may be in conflict.
This warranty gives the consumer specific rights, and he or she may also have other rights which vary from state to state. Exclusions: This limited warranty does not apply: 1) to any product damaged by accident; 2) in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs; 3) if the serial number has been altered, defaced or removed; or 4) if the owner of the product resides outside of the U.S.A. or Canada.
Find More Information Trouver davantage d’informations Encuentre más información
