ASSEMBLY INSTRUCTIONS RiverRidge® SOMERSET 2 DOOR FLOOR CABINET ITEM #: 06-038 XS WHITE ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of the small parts. Care should be taken in unpacking and assembling this item to keep the small parts away from children. WARNING Young children can be seriously injured or killed, if furniture tips over. Don’t use this item for a TV stand. Use angle-braces or anchors to secure furniture to the wall.
Send requests for missing or damaged parts replacements by email to : customer.service@ssi-rr.com or call toll free 1-(844)-223-5201 or order parts on line at www.riverridgehome.com THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 75 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS. IF LOADED WITH MORE THAN 25 POUNDS PER SHELF AS THIS MAY CAUSE DAMAGE TO THE SHELF AND MAY CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST
TOOLS NEEDED FOR ASSEMBLY : FLAT & PHILIPS SCERWDRIVER (NOT INCLUDED) THE USE OF POWER SCREWDRIVER IS NOT RECOMMENED
STEP1 STEP1 1. Attached drawer left side panel (12) to drawer back board (14) by inserting 2pc long wood screws (M) through holes on the left side panel (12), then tighten into drawer back board (14). 2. Attached drawer right side panel (11) to drawer back board (14) by inserting 2pc long wood screws (M) through holes on the right side panel (11),then tighten into drawer back board (14). 3.
STEP3 STEP3 1. Put the assembled drawer upside down. 2. Attach the drawer slides attach to drawer (W) to drawer right side panel (11) by inserting 2 wood screws (L) through holes on the drawer slides attach to drawer (W), then tighten into drawer right side panel (11) by using a Philips screwdriver. 3.
STEP5 STEP5 1. Screw in 3 cam bolts (B) into the pre-threaded holes on the right support board (3). 2. Insert 3 wood dowels (A) into the dowel holes on the right support board (3). 3. Attach right support panel (3) to right side panel (2) by inserting the wood dowels (A) into the dowel holes and inserting the cam bolts (B) into the cam lock holes on the right side panel (2). 4.
STEP7 STEP7 1. 2. Attach the drawer slides attach to side panel (V) to right side panel (2) by inserting 2 wood screws (L) through the holes on the drawer slides attach to side panel (V) then tighten into right side panel (2). Attach 2 Hinge (E) to right side panel (2) by inserting 4 wood screws (D) through the holes on the Hinge (E) then tighten to right side panel (2). STEP8 STEP8 1.
STEP9 STEP9 1.Insert 4 wood dowels (A) into dowel holes on top of left side panel (1) and right side panel (2) separately. 2.Screw in 4 cam bolts (B) into the pre-threaded holes on top board (7). 3.Attach top board (7) to left side panel (1) and right side panel (2) by inserting 4 wood dowels (A) into dowel holes on top board (7), and inserting 4 cam bolts (B) into cam lock holes on left side panel (1) and right side panel (2). 4.
STEP11 STEP11 1. Attach drawer to cabinet by sliding 2 drawer slider with wheels (N) into 2 drawer sliders which already assembled to the cabinet. 2. Insert 8 shelf holders (I) into holes on left side panel (1) and right side panel (2). 3. Make sure the 8 shelf holders (I) on the same height. 4. Put the 2 shelves (9) onto the shelf holders (I). STEP12 STEP12 1.
STEP13 STEP13 1. Attach the metal bracket (s) to the back board (8). 2.Insert 1 wood screw (U) through hole on the metal bracket (S) then tighten to the back board (8) and top board (7) by using a Philips screwdriver. 3.According to the position of the metal bracket (s) which assembled to the cabinet then drill hole on the wall. 4.Insert 1 plastic anchor (Q) into hole on the wall then attach another metal bracket (S) to the anchor (Q). 5.
ENJOY YOUR NEW RiverRidge® CABINET NOW ! Attention Adults: The cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct the hazard such as tightening of screws and taking any damaged parts away from the children. Thank you for purchasing this RiverRidge® Home Products item. We hope you enjoy it, and consider purchasing other RiverRidge® items. Send requests for missing or damaged parts replacements by email to : customer.service@ssi-rr.