ASSEMBLY INSTRUCTIONS RiverRidge® Somerset 2 Door Floor Cabinet ITEM #: 06-038 WHITE ITEM #: 06-077 GRAY ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over. Don’t use this item for a TV stand or place heavy objects on top of item.
THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF AND 10 POUNDS PER DRAWER OR A TOTAL OF 85 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS AND 10 POUNDS PER DRAWER OR A TOTAL OF 85 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 25 POUNDS PER SHELFAND 10 POUNDS PER DRAWER OR 85 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM WALL AND CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST QTY DESCRIPTION 1 1 PC LEFT SIDE PANEL 2 1 PC RIGHT SIDE PANEL 3 1 PC RIGHT SUPPORT BOARD 4 1 PC CROSS BAR 5 1 PC BOTTOM BOARD 6 1 PC LEFT SUPPORT BOARD 7 1 PC TOP BOARD 8 2 PCS BACK BOARD 9 2 PCS ADJUSTABLE SHELF 10 1 PC DRAWER FRONT BOARD 11 1 PC DRAWER RIGHT SIDE PANEL 12 1 PC DRAWER LEFT SIDE PANEL 13 1 PC DRAWER BOTTOM BOARD 14 1 PC DRAWER BACK BOARD 15 1 PC LEFT DOOR 16 1 PC RIGHT DOOR NO.
NO PARTS QTY DESCRIPTION A 18 PCS WOOD DOWEL B 18 PCS CAM BOLT C 18 PCS CAM LOCK D 26 PCS WOOD SCREW 3X10MM E 4 PCS HINGE F 2 PCS MAGNET PLATE G 18 PCS WOOD SCREW 3X12MM H 1 SET MAGNET WITH 2 SCREWS I 8 PCS SHELF HOLDER J 6 PCS MACHINE SCREW 4X15MM K 3 PCS HANDLE L 10 PCS WOOD SCREW 3.5X12MM M 5 PCS P 1 PC Q 1 PC PLASTIC ANCHOR S 2 PCS METAL BRACKET T 1 PC PLASTIC LOCK STRIP U 1 PC V 1 SET W 1 SET LONG WOOD SCREW 3.
STEP 1 M 14 M 12 11 13 1. Attach drawer left side panel (12) to drawer back board (14) by inserting 2 long wood screws (M) through holes on drawer left side panel (12) and tighten to drawer back board (14). 2. Attached drawer right side panel (11) to drawer back board (14) by inserting 2 long wood screws (M) through holes on drawer right side panel (11) and tighten to drawer back board (14). 3.
STEP 3 11 14 C 12 13 J K 10 1. Attach drawer front board (10) to drawer left side panel (12), drawer right side panel (11) and drawer bottom board (13) by inserting dowels (A) into dowel holes and inserting cam bolts (B) into cam lock holes on drawer left side panel (12), drawer right side panel (11) and inserting drawer bottom board (13) into groove on drawer front board (10). 2.
STEP 5 C B A 6 C B A C 1 B 1. Screw in 3 cam bolts (B) into pre-threaded holes on left support board (6). 2. Insert 2 wood dowels (A) into dowel holes on left support board (6). 3. Attach left support board (6) to left side panel (1) by inserting wood dowels (A) into dowel holes and inserting cam bolts (B) into cam lock holes on left side panel (1). 4. Insert 3 cam locks (C) into cam lock holes on left side panel (1) and rotate clockwise to secure cam bolts (B) in place. STEP 6 1. 2.
STEP 7 1. Screw in 3 cam bolts (B) into pre-threaded holes on right support board (3). 2. Insert 2 wood dowels (A) into dowel holes on right support board (3). 3. Attach right support board (3) to right side panel (2) by inserting wood dowels (A) into dowel holes and inserting cam bolts (B) into cam lock holes on right side panel (2). 4. Insert 3 cam locks (C) into cam lock holes on right side panel (2) and rotate clockwise to secure cam bolts (B) in place. STEP 8 1. 2.
AB STEP 9 2 BA 1 AB AB 1. Screw in 6 cam bolts (B) into pre-threaded holes on left side panel (1) and right side panel (2). 2. Insert 6 wood dowels (A) into dowel holes on left side panel (1) and right side panel (2). STEP 10 1. Attach cross bar (4) to left side panel (1) by inserting wood dowel (A) and cam bolt (B) into holes on cross bar (4), then insert 1 cam lock (C) into cam lock hole on cross bar (4) and rotate clockwise to secure cam bolt (B) in place. 2.
STEP 11 B B B 7 B 1.Screw in 4 cam bolts (B) into pre-threaded holes on top board (7). STEP 12 7 A C A C 1. Insert 4 wood dowels (A) into dowel holes on top of left side panel (1) and right side panel (2). 2. Attach top board (7) to left side panel (1) and right side panel (2) by inserting wood dowels (A) into dowel holes on top board (7) and inserting cam bolts (B) into cam lock holes on left side panel (1) and right side panel (2). 3.
STEP 13 1. Slide 2 back board (8) into plastic connection strip (P) and attach to pre-assembled cabinet by inserting 18 wood screws (G) through holes on back boards (8) and tighten to cabinet. STEP 14 1. Attach left door (15) to left side panel (1) by inserting 6 wood screws (D) through holes on hinges (E) and tighten to left door (15). 2. Attach handle (K) to left door (15) by inserting 2 machine screws (J) through holes on left door (15) and tighten to handle (K). 3.
STEP 15 I 9 9 1. Insert 8 shelf holders (I) into holes on left side panel (1) and right side panel (2) making sure shelf holders (I) are at same height. 2. Put 2 shelves (9) onto shelf holders (I). STEP 16 1. Attach drawer to cabinet by inserting drawer slides with wheels into drawer slides in cabinet. 2. Adjust hinges to make doors close tight as needed.
STEP 17 S U Q S M 1.Attach metal bracket (S) to the top board (7) by inserting 1 wood screw (U) through hole on metal bracket (S) and tighten to back board (8) and top board (7). 2.Align position of metal bracket (S) assembled to cabinet to desired position on wall and drill hole on wall. 4.Insert 1 plastic anchor (Q) into hole on wall and attach another metal bracket (S) to anchor (Q). 5.Insert 1 long screw (M) through metal bracket (S) and tighten to plastic anchor (Q). STEP 18 T 1.
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions.
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com RiverRidge® is a registered trademark of Sourcing Solutions, Inc.
INSTRUCCIONES PARA EL ARMADO ARMARIO DE PISO CON 2 PUERTAS SOMERSET de RiverRidge® ARTÍCULO N.°: 06-038 BLANCO ARTÍCULO N.°: 06-077 GRIS REQUIERE QUE LO ARME UN ADULTO. Este producto requiere que lo arme un adulto debido a las piezas pequeñas. Se debe tener cuidado al desempaquetar y armar este artículo para que las piezas pequeñas estén lejos de los niños. ADVERTENCIA Los niños pequeños pueden sufrir lesiones serias o incluso la muerte, si el mueble se tumba.
ESTA UNIDAD CON ESTANTE ACEPTARÁ HASTA 25 LIBRAS POR ESTANTE O SEA UN TOTAL DE 75 LIBRAS. NO PONGA MÁS DE 25 LIBRAS EN CADA ESTANTE. SI ESTÁ CARGADO CON MÁS DE 25 LIBRAS POR ESTANTE, ESTO PODRÍA CAUSAR DAÑOS AL ESTANTE Y UNA SERIA LESIÓN O LA MUERTE. ADVERTENCIA SERIAS LESIONES O FATALES PUEDEN OCURRIR SI SE TUMBA EL MUEBLE.
LISTA DE PIEZAS PARTS LIST N.° PIEZAS CANT.
N.° PIEZAS CANT.
PASO 1 1. Sujete el panel del lado izquierdo del cajón (12) a la tabla de atrás del cajón (14) insertando 2 tornillos largos para madera (M) a través de los agujeros del panel del lado izquierdo del cajón (12), luego apretándolos a la tabla de atrás del cajón (14). 2.
PASO 3 1. 2. 3. Ponga el cajón armado dado vuelta. Sujete los deslizadores del cajón para el cajón (W) al panel del lado derecho del cajón (11) insertando 2 tornillos para madera (L) en los agujeros de los deslizadores para el cajón al cajón (W), luego apriételos al panel del lado derecho del cajón (11) usando un destornillador Phillips.
PASO 5 1. Atornille los 3 pernos de leva (B) en los agujeros con rosca en la tabla de soporte derecha (3). 2. Inserte las 3 clavijas de madera (A) en los agujeros para las clavijas en la tabla de soporte derecha (3). 3. Sujete el panel de soporte derecho (3) al panel del lado derecho (2) insertando clavijas de madera (A) en los agujeros para las clavijas e insertando los pernos de leva (B) en los agujeros de la traba de leva en el panel del lado derecho (2). 4.
PASO 7 1. 2. Sujete los deslizadores del cajón para el panel lateral (V) al panel del lado derecho (2), inserte 2 tornillos para madera (L) en los agujeros de los deslizadores del cajón para el panel lateral (V) y luego sujételos al panel del lado derecho (2). Sujete 2 bisagras (E) al panel del lado derecho (2) insertando 4 tornillos para madera (D) en los agujeros de la bisagra (E), luego apriételos al panel del lado derecho (2). PASO 8 1.
PASO 9 1. Inserte 4 clavijas de madera (A) en los agujeros de la clavija del panel del lado izquierdo (1) y panel del lado derecho (2) por separado. 2. 2. Atornille 4 pernos de leva (B) en los agujeros con rosca de la tabla de arriba (7). 3.
PASO 11 1. Sujete el cajón al armario deslizando los 2 deslizadores del cajón con las ruedas (N) en los dos deslizadores del cajón que ya están armados en el armario. 2. Inserte 8 soportes del estante (I) en los agujeros del panel del lado izquierdo (1) y panel del lado derecho (2). 3. Asegúrese de que los 8 soportes del estante (I) estén a la misma altura. 4. Ponga los 2 estantes (9) en los soportes del estante (I). PASO 12 1.
PASO 13 1. Sujete el soporte de metal (S) a la tabla de atrás (8). 2. Inserte 1 tornillo para madera (U) en el agujero del soporte de metal (S) y luego apriételo a la tabla de atrás (8) y tabla de arriba (7) usando un destornillador Phillips. 3. Según la posición del soporte de metal (S) que está armado en el armario, perfore un agujero en la pared. Inserte 1 sujetador de plástico (Q) en el agujero de la pared y luego sujete otro soporte de metal (S) al sujetador (Q). 4.
¡DISFRUTE SU NUEVO ARMARIO de RiverRidge® AHORA! Gracias por comprar este producto RiverRidge® para el hogar. Esperamos que lo disfrute y que considere comprar otros productos RiverRidge®. Envíe pedidos de piezas dañadas o que faltan por correo electrónico a: customer.service@ssirr.com o llame gratis al 1-(844)-223-5201 o pida piezas en línea en www.riverridgehome.com RiverRidge® es una marca registrada de Sourcing Solutions, Inc., Hudson, WI 54016.