Quick Installation Guide for XR-1000H Series Wireless Arrays November, 2012
XR-1000H Quick Installation Guide is a registered trademark of Xirrus, Inc. All other trademarks and brand names are marks of their respective holders. All rights reserved. This document may not be reproduced or disclosed in whole or in part by any means without the written consent of Xirrus, Inc.
XR-1000H Quick Installation Guide CONTENTS 1) You Need the Following Items ........................................................................................................ 1 2) Choose a Suitable Location .............................................................................................................. 1 3) Prepare the Mounting Location ....................................................................................................... 2 4) Install the Mounting Plate .................
XR-1000H Quick Installation Guide - ii -
XR-1000H Quick Installation Guide XR-1000H Quick Installation Guide The XR‐1000H Series Hardened Wireless Array provides Xirrus Array technology in a hardened case for installation outdoors and in other harsh environments. This guide describes how to install the XR‐1000H on a pole or wall and execute the initial power up of the Array. The pole or wall can be a structure that is installed at ground level or on a roof. The XR‐1000H is not compatible with other Xirrus mounting options.
XR-1000H Quick Installation Guide Keep the unit away from electrical devices or appliances that generate RF noise—at least 3 to 6 feet (1 to 2 meters). 3) Prepare the Mounting Location Part of the mechanical installation is to ensure that the Array is grounded to earth ground to dissipate any static electric charge that may develop due to wind. Determine a good electrical earth ground point near the Array mounting location.
XR-1000H Quick Installation Guide 5) Mount the Array on a Pole or Wall 5a) Pole Mounting For pole mounting, Xirrus recommends using metal straps (not included with the Array). The metal straps can be obtained from BAND‐IT‐IDEX, Inc. (www.BAND‐IT‐IDEX.com). See their web site for additional contact information. Complete the following steps to mount the Array to a pole. Install the metal bands through the holes in the mounting bracket.
XR-1000H Quick Installation Guide Once the strap is satisfactorily tight, rotate the Band‐It tool back so that the strap cannot slide back through the buckle. Using the built in cutting tool on the Band‐It tool, cut the excess strap. Your installation should now appear as shown here. Using a hammer, bend back and flatten the remaining strap. Using a hammer, bend and flatten the two tabs on the buckle, so that they hold the flattened strap end in place.
XR-1000H Quick Installation Guide 5b) Wall Mounting Place the Array in the desired location and mark the location of the mounting holes on the wall. Drill and prepare the holes for the desired screw type. In metal walls the holes may be tapped to the proper thread or alternatively the Array may be mounted with sheet metal screws. For concrete walls a plastic anchor and screw are suggested. Note: Mounting screws for attaching the plate to the wall are not provided in the kit.
XR-1000H Quick Installation Guide 7) Install an Antenna NOTE: Use only Xirrus‐approved external antennas supplied by the manufacturer or purchased from Xirrus. Also see the Notices and Warnings regarding external antennas in the Warning & Notices section of this guide. Low loss cable is available such that the antenna can be mounted in an appropriate location that could be several feet away from the Array.
XR-1000H Quick Installation Guide 9) Connect the Cables All XR‐1000H Arrays are powered directly via their Gigabit Ethernet connection and that power must be provided using a Xirrus PoGE Injector. See the PoGE Installation Guide for details on the Xirrus‐supplied injector modules and Array compatibility. Power: These Arrays are only powered through the GIG POE port. Only Xirrus‐supplied power injectors may be used. Data: Data is supplied to the Gigabit port via the same cable that powers the Array.
XR-1000H Quick Installation Guide 10) Log In to the Array Establish a network connection to the Array using a web browser. In the URL field, enter the IP address assigned by your DHCP server. If you are using DHCP and DNS, use the Arrayʹs default host name, which is its serial number (for example, XR0823090CACD). Be aware of the following: − By default, the Array tries to obtain an IP address via DHCP. If it cannot do so, the factory default is a static IP address of 10.0.2.1 with a mask of 255.
XR-1000H Quick Installation Guide 11) Configure the Array Click Express Setup A license is needed to enable the full functionality of the Array. Without a license, the Array can be powered up and will only have a basic wireless network configuration including just one operating radio. The Array’s license is not installed at the factory. Enter the key in the License Key field. The key was provided to you in an email as an attachment in the form of an Excel file (.xls).
XR-1000H Quick Installation Guide Click Save Changes to Flash on the upper right to save your settings. Click Execute at the bottom of the page to set up/enable all IAPs (radios) automatically. For improved security, you must also take the additional steps described in “Secure Low Level Access to the Array” in Step 12. With a basic configuration established the Wireless Array is now functional. Refer to the Wireless Array User’s Guide for additional configuration information.
XR-1000H Quick Installation Guide 1. To access CLI via the WMI, click CLI under the Tools section on the left. 2. If Xircon access at the XBL level is to be allowed, use the following three commands to change the XBL username and password from the default values of admin/admin. In the example below, replace newusername and newpassword with your desired entries. Note that these entries are case‐sensitive. (config)#boot-env set username newusername (config)#boot-env set password newpassword (config)#save 3.
XR-1000H Quick Installation Guide Mounting Bracket Dimensions Customer Support Xirrus Customer Service Representatives are available 24 x 7 via: Email: support@xirrus.com Chat: (Available Mon‐Fri 12AM‐12AM PST) Phone: United States and Canada: +1.800.947.7871 (US Toll Free) or +1.805.262.1600 (Direct) Europe, Middle East, and Africa: +44.20.3239.8644 Australia: 1 300 XIRRUS (1300 947 787 ‐ Local Call Cost) Asia and Oceania: +61.2.8006.0622 Latin, Central, and South America: +1.805.262.
XR-1000H Quick Installation Guide Software used by the modular Access Points (APs) is covered by the Xirrus Software License and Product Warranty Agreement. Non‐Modification Statement: Unauthorized changes or modifications to the device are not permitted. Use only Xirrus‐approved external antennas supplied by the manufacturer. Modifications to the device will void the warranty and may violate FCC regulations. UL Statement: Use only with listed ITE product.
XR-1000H Quick Installation Guide Warnings GENERAL SAFETY GUIDELINES WARNING: This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. WARNING: Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
XR-1000H Quick Installation Guide CAUTION: Xirrus PoGE Injectors rely on the building’s installation for over current protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A (U.S.) or 240 VAC, 10A (International) is used on all current‐carrying conductors. EXTERNAL ANTENNAS WARNING: In order to comply with radio frequency (RF) exposure limits, the antennas for this product should be positioned no less than 20 cm from your body or nearby persons.
XR-1000H Quick Installation Guide interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following safety measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Consult the dealer or an experienced wireless technician for help.
XR-1000H Quick Installation Guide Industry Canada Statements and Warnings Industry Canada Notice and Marking: This Class A digital apparatus complies with Canadian ICES‐003. Cet appareil numérique de la classe A est conforme à la norme NMB‐003 du Canada. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.
XR-1000H Quick Installation Guide High Power Radars: High power radars are allocated as primary users (meaning they have priority) in the 5250MHz to 5350MHz and 5650MHz to 5850MHz bands. These radars could cause interference and/or damage to Wireless LAN devices used in Canada. Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-àd., qu’ils ont la priorité) pour les bandes 5 250 - 5 350 MHz et 5 650 - 5 850 MHz.
XR-1000H Quick Installation Guide Latviski [Latvian] Šī iekārta atbilst Direktīvas 1999/5/EK būtiskajā prasībām un citiem ar to saistītajiem noteikumiem. Lietuvių [Lithuanian] Šis įrenginys tenkina 1995/5/EB Direktyvos esminius reikalavimus ir kitas šios direktyvos nuostatas. Nederlands [Dutch] Dit apparant voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1995/5/EC.
XR-1000H Quick Installation Guide WEEE Compliance: Natural resources were used in the production of this equipment. This equipment may contain hazardous substances that could impact the health of the environment. If you need more information on collection, re‐use and recycling systems, please contact your local or regional waste administration. Please contact Xirrus for specific information on the environmental performance of our products.
XR-1000H Quick Installation Guide Η δη ιουργβάικτ ωνεξωτερικο ρουστη ζ νησυ νοτ των 5470–5725 ΜΗz ε ιτρ ετάιωνο ετάά όάδειά της ΕΕΤΤ, ου ορηγεβτάι στερά ά ό σ φωνη γν η του ΓΕΕΘΑ. Ερισσότερες λε τομ ρειεωστο www.eett.gr Italy: This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless this wireless LAN product is operating within the boundaries of the owner’s property, its use requires a “general authorization.
XR-1000H Quick Installation Guide Only antennas provided by Xirrus for use with the product should be installed. The use of any other antennas may cause damage to the access points or violate regulatory emission limits and will not be supported by Xirrus. International Guidelines for Exposure to Radio Waves The Xirrus Arrays include radio transmitters and receivers.
XR-1000H Quick Installation Guide recommends that if you are interested in further reducing your exposure then you can easily do so by reorienting antennas away from the user or placing the antennas at a greater separation distance then recommended or lowering the transmitter power output. Industry Canada Guidelines for Exposure to Radio Waves The Xirrus Arrays include radio transmitters and receivers.
XR-1000H Quick Installation Guide Software License and Product Warranty Agreement THIS SOFTWARE LICENSE AGREEMENT (THE “AGREEMENT”) IS A LEGAL AGREEMENT BETWEEN YOU (“CUSTOMER”) AND LICENSOR (AS DEFINED BELOW) AND GOVERNS THE USE OF THE SOFTWARE INSTALLED ON THE PRODUCT (AS DEFINED BELOW).
XR-1000H Quick Installation Guide the Software, Licensor and its suppliers retain all rights, title and interest in and to the Software, including (i) any and all trade secrets, copyrights, patents and other proprietary rights therein or thereto or (ii) any Marks (as defined in Section 2.3 below) used in connection therewith. In no event shall Customer remove, efface or otherwise obscure any Marks contained on or in the Software. All rights not expressly granted herein are reserved by Licensor. 2.3 Copies.
XR-1000H Quick Installation Guide Licensorʹs authorized representative; and (iii) the Software or Product on which the Software is installed has not been subject to any unusual electrical charge. 3.2 DISCLAIMER.
XR-1000H Quick Installation Guide BE DEEMED TO APPLY TO ANY LIABILITY BASED ON FRAUD, WILLFUL MISCONDUCT, GROSS NEGLIGENCE OR PERSONAL INJURY OR DEATH. 4.0 CONFIDENTIAL INFORMATION 4.1 Generally. The Software (and its accompanying Documentation) constitutes Licensorʹs and its suppliersʹ proprietary and confidential information and contains valuable trade secrets of Licensor and its suppliers (“Confidential Information”).
XR-1000H Quick Installation Guide furnish Licensor with a certificate signed by an executive officer of Customer verifying that the same has been done. 6.
XR-1000H Quick Installation Guide TO ALL OF THE TERMS OF THIS AGREEMENT, RETURN THE UNUSED PRODUCT TO THE PLACE OF PURCHASE FOR A FULL REFUND. LIMITED WARRANTY. Xirrus warrants that for a period of one year from the date of purchase by the original purchaser (“Customer”): (i) the Xirrus Equipment (“Equipment”) will be free of defects in materials and workmanship under normal use; and (ii) the Equipment substantially conforms to its published specifications.
XR-1000H Quick Installation Guide Xirrus. Equipment including technical data, is subject to U.S. export control laws, including the U.S. Export Administration Act and its associated regulations, and may be subject to export or import regulations in other countries. Customer agrees to comply strictly with all such regulations and acknowledges that it has the responsibility to obtain licenses to export, re‐ export, or import Equipment.
XR-1000H Quick Installation Guide 1.800.947.7871 Toll Free in the US +1.805.262.1600 Sales +1.805.262.1601 Fax 2101 Corporate Center Drive Thousand Oaks, CA. 91320 USA To learn more visit: xirrus.com or email: info @ xirrus.com © 2012 Xirrus Inc. All Right Reserved. This Xirrus logo is a registered trademark of Xirrus, Inc. All other trademarks are the property of their respective owners. Content subject to change without notice.
