Quick Installation Guide

ManualsBrandsRiverbed Technology ManualsElectronics802.11abgn/ac module

Table Of Contents

Appendix D: Notices (XR-1000 to XR-6000 Indoor Models)

Wireless Access Point

559

Appendix D: Notices (XR-1000 to XR-6000 Indoor Models)

This appendix contains the following information:

 “Notices” on page 559

 “EU Directive 1999/5/EC Compliance Information” on page 564

 “Compliance Information (Non-EU)” on page 571

 “Safety Warnings” on page 573

 “Translated Safety Warnings” on page 574

 “Software License and Product Warranty Agreement” on page 576

 “Hardware Warranty Agreement” on page 576

Notices

Wi-Fi Alliance Certification

www.wi-fi.org

FCC Notice

This device complies with Part 15 of the FCC Rules, with operation subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause unwanted operation.



This Appendix contains Notices, Warnings, and Compliance information for

these indoor model series: XR-1000, XR-2000, XR-4000, and XR-6000.

This includes the models just listed whether or not they have been upgraded

to have IEEE 802.11ac Wave2 wireless capability by replacing existing

radios with XI-AC3470 modules.

For the XR-500/600/XD Series, please see “Notices (XD and XR500/600

Series Only)” on page 541.

For models including the letter H (such as the XR-520H and XH2-

120), please see the Quick Installation Guide for that model.

Summary of content (18 pages)

PAGE 1
Wireless Access Point Appendix D: Notices (XR-1000 to XR-6000 Indoor Models)  This Appendix contains Notices, Warnings, and Compliance information for these indoor model series: XR-1000, XR-2000, XR-4000, and XR-6000. This includes the models just listed whether or not they have been upgraded to have IEEE 802.11ac Wave2 wireless capability by replacing existing radios with XI-AC3470 modules. For the XR-500/600/XD Series, please see “Notices (XD and XR500/600 Series Only)” on page 541.
PAGE 2
Wireless Access Point This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate RF energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3
Wireless Access Point UL Statement Use only with listed ITE product. Battery Warning ! Caution! The AP contains a battery which is not to be replaced by the customer. Danger of Explosion exists if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. RF Radiation Hazard Warning (FCC and Industry Canada) For APs with IEEE 802.
PAGE 4
Wireless Access Point Pour les autres appareils, installez l'appareil en veillant à conserver une distance d'au moins 30 cm entre les éléments rayonnants et les personnes. Cet avertissement de sécurité est conforme aux limites d'exposition définies par la norme CNR-102 at relative aux fréquences radio. Industry Canada Notice and Marking This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
PAGE 5
Wireless Access Point This equipment should be installed and operated with a minimum distance of 30cm between the radiator and your body. Cet équipement doit être installé et utilisé à une distance minimale de 30cm entre le radiateur et votre corps. High Power Radars High power radars are allocated as primary users (meaning they have priority) in the 5250MHz to 5350MHz and 5650MHz to 5850MHz bands. These radars could cause interference and/or damage to LELAN devices used in Canada.
PAGE 6
Wireless Access Point EU Directive 1999/5/EC Compliance Information  This Appendix contains Notices, Warnings, and Compliance information for these indoor model series: XR-1000, XR-2000, XR-4000, and XR-6000. This includes the models just listed whether or not they have been upgraded to have IEEE 802.11ac Wave2 wireless capability by replacing existing radios with XI-AC3470 modules. For Notices, Warnings, and Compliance information for other models, see the notes at the beginning of this chapter.
PAGE 7
Wireless Access Point Ελληνυκη [Greek] Αυτόζ ο εξοπλτσμόζ είναι σε συμμόρφωση με τιζ ουσιώδειζ απαιτήσειζ και ύλλεζ σχετικέζ διατάξειζ τηζ Οδηγιαζ 1999/5/EC. Français [French] Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC. ĺslenska [Icelandic] Þetta tæki er samkvæmt grunnkröfum og öðrum viðeigandi ákvæðum Tilskipunar 1999/5/EC.
PAGE 8
Wireless Access Point Portuguès [Portuguese] Este equipamento está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC. Slovensko [Slovenian] Ta naprava je skladna z bistvenimi zahtevami in ostalimi relevantnimi popoji Direktive 1999/5/EC. Slovensky [Slovak] Toto zariadenie je v zhode so základnými požadavkami a inými prislušnými nariadeniami direktiv: 1999/5/EC.
PAGE 9
Wireless Access Point WEEE Compliance  Natural resources were used in the production of this equipment.  This equipment may contain hazardous substances that could impact the health of the environment.  In order to avoid harm to the environment and consumption of natural resources, we encourage you to use appropriate take-back systems when disposing of this equipment.
PAGE 10
Wireless Access Point National Restrictions In the majority of the EU and other European countries, the 2.4 GHz and 5 GHz bands have been made available for the use of Wireless LANs. The following table provides an overview of the regulatory requirements in general that are applicable for the 2.4 GHz and 5 GHz bands. Frequency Band (MHz) Max Power Level (EIRP) (mW) Indoor Outdoor 2400–2483.
PAGE 11
Wireless Access Point Les liasons sans fil pour une utilisation en extérieur d’une distance supérieure à 300 mèters doivent être notifiées à l’Institut Belge des services Postaux et des Télécommunications (IBPT). Visitez www.bipt.be pour de plus amples détails. Greece A license from EETT is required for the outdoor operation in the 5470 MHz to 5725 MHz band. Xirrus recommends checking www.eett.gr for more details.
PAGE 12
Wireless Access Point Antennas The Xirrus Wireless Array employs integrated antennas that cannot be removed and which are not user accessible. Nevertheless, as regulatory limits are not the same throughout the EU, users may need to adjust the conducted power setting for the radio to meet the EIRP limits applicable in their country or region. Adjustments can be made from the product’s management interface — either Web Management Interface (WMI) or Command Line Interface (CLI).
PAGE 13
Wireless Access Point Compliance Information (Non-EU)  This Appendix contains Notices, Warnings, and Compliance information for these indoor model series: XR-1000, XR-2000, XR-4000, and XR-6000. This includes the models just listed whether or not they have been upgraded to have IEEE 802.11ac Wave2 wireless capability by replacing existing radios with XI-AC3470 modules. For Notices, Warnings, and Compliance information for other models, see the notes at the beginning of this chapter.
PAGE 14
Wireless Access Point Declaration of Conformity—Brazil XR-1000 XR-4000 572 XR-2000
PAGE 15
Wireless Access Point Safety Warnings  This Appendix contains Notices, Warnings, and Compliance information for these indoor model series: XR-1000, XR-2000, XR-4000, and XR-6000. This includes the models just listed whether or not they have been upgraded to have IEEE 802.11ac Wave2 wireless capability by replacing existing radios with XI-AC3470 modules. For Notices, Warnings, and Compliance information for other models, see the notes at the beginning of this chapter.
PAGE 16
Wireless Access Point Translated Safety Warnings  This Appendix contains Notices, Warnings, and Compliance information for these indoor model series: XR-1000, XR-2000, XR-4000, and XR-6000. This includes the models just listed whether or not they have been upgraded to have IEEE 802.11ac Wave2 wireless capability by replacing existing radios with XI-AC3470 modules. For Notices, Warnings, and Compliance information for other models, see the notes at the beginning of this chapter.
PAGE 17
Wireless Access Point ! Disjoncteur L'unité XR Wireless Array dépend de l'installation du bâtiment pour ce qui est de la protection contre les surintensités. Assurez-vous qu'un fusible ou qu'un disjoncteur de 120 Vca, 15 A (États-Unis) ou de 240 Vca, 10 A (International) maximum est utilisé sur tous les conducteurs de courant.
PAGE 18
Wireless Access Point Software License and Product Warranty Agreement For Software License and Product Warranty information, please see http:// www.xirrus.com/support/eula/. Hardware Warranty Agreement For the Hardware Warranty Agreement, please see http://www.xirrus.com/ support/eula/.