Operating Instructions
RSL wireless remote control
Model: RSL020T-A/RSL020T-B
Operating elements
1. Indicator lamp
2. Control keys
3. ALL ON/ALL OFF key
4. Battery compartment lid
--RSL020T-B
is without ALL ON/ALL OFF key
Inserting/replacing battery
1. Remove the battery compartment lid
2. Insert one round cell battery, type CR2032, into the battery recess. The positive pole should face upward
(see th
e “+” imprint on the battery). Push the battery all the way into the battery recess.
3. Close the battery compartment. The battery must be replaced when the remote control’s range
decreases noticeably or when the indicator lamp
Key functions
• The control keys (2)
are arranged in two columns: left column =
• Use the upper four
keys on the left column to activate channels 1 to
• Use the upper four
keys on the right column
• Use the lower key ALL ON
on the left column to activate channels 1 to
• Use the lower key ALL OFF
on the right column to deactivate channels 1 to
The indicator lamp (1)
lights up each time a key is pressed.
Operation
Configuration
and the dimming function will depend on your radio
detailed information in the operating instructions of your radio
The remote con
trol can control an unlimited number of compatible radio
Technical data
Battery type ..............................CR2032
Number of channels .................
4 channels+ G channel
Transmission frequency............433.
92
Transmission range ...........
.......max. 30 m (in open area)
Dimensions (W x H x D) ...........115 x
3
Weight ......................................32 g
Notice
Do not ingest battery, Chemical Burn Hazard
This product contains a coin / button cell
battery. If the coin / button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
RSL wireless remote control
is without ALL ON/ALL OFF key
1. Remove the battery compartment lid
(4) from the back of the remote control.
2. Insert one round cell battery, type CR2032, into the battery recess. The positive pole should face upward
e “+” imprint on the battery). Push the battery all the way into the battery recess.
3. Close the battery compartment. The battery must be replaced when the remote control’s range
decreases noticeably or when the indicator lamp
(1) no longer lights when a
button is pushed.
are arranged in two columns: left column =
ON
/ right column =
keys on the left column to activate channels 1 to
4
individually.
keys on the right column
to deactivate channels 1 to 4
individually.
on the left column to activate channels 1 to
4
simultaneously.
on the right column to deactivate channels 1 to
4
simultaneously.
lights up each time a key is pressed.
and the dimming function will depend on your radio
-
controlled power outlet. You can fnd
detailed information in the operating instructions of your radio
-
controlled power outlet.
trol can control an unlimited number of compatible radio
-
controlled power outlets
Battery type ..............................CR2032
4 channels+ G channel
92
MHz
.......max. 30 m (in open area)
3
7x 9 mm
g
Do not ingest battery, Chemical Burn Hazard
battery. If the coin / button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
2. Insert one round cell battery, type CR2032, into the battery recess. The positive pole should face upward
e “+” imprint on the battery). Push the battery all the way into the battery recess.
3. Close the battery compartment. The battery must be replaced when the remote control’s range
button is pushed.
/ right column =
OFF.
individually.
individually.
simultaneously.
simultaneously.
controlled power outlet. You can fnd
controlled power outlet.
controlled power outlets
battery. If the coin / button cell battery is swallowed, it can cause severe internal