Operating Instructions
RSL wireless remote control
Model: RSL010T-A/RSL010T-B
Operating elements
1. Indicator lamp
2. Control keys
3. ALL ON/ALL OFF key
4. Battery compartment lid
--RSL010T-B is without
ALL ON/ALL OFF key
Inserting/replacing battery
1. Remove the battery compartment lid
2. Insert one round cell battery, type CR2032, into the battery recess. The positive pole should face upward
(see the “+” imprin
t on the battery). Push the battery all the way into the battery recess.
3. Close the battery compartment. The battery must be replaced when the remote control’s range
decreases noticeably or when the indicator lamp
Key functions
• The control keys (2)
are arranged in two columns: left column =
• Use the upper four
keys on the left column to activate channels 1 to
• Use the upper four
keys on the right column to deactivat
• Use the lower key ALL ON
on the left column to activate channels 1 to
• Use the lower key ALL OFF
on the right column to deactivate channels 1 to
The indicator lamp (1)
lights up each ti
Operation
Configuration
and the dimming function will depend on your radio
detailed information in the operating instructions of your radio
The remote control can control
an unlimited number of compatible radio
Technical data
Battery type ..............................CR2032
Number of channels .................
4 channels+ G channel
Transmission frequency............433.
92
Transmission range ...........
.......max. 30 m (in open area)
Dimensions (W x H x D) ...........110 x
38
Weight ......................................33 g
Notice
Do not ingest battery, Chemical Burn Hazard
This product contains a coin / button cell battery. If the
burns in just 2 hours and can lead to death.
RSL wireless remote control
ALL ON/ALL OFF key
1. Remove the battery compartment lid
(4) from the back of the remote control.
2. Insert one round cell battery, type CR2032, into the battery recess. The positive pole should face upward
t on the battery). Push the battery all the way into the battery recess.
3. Close the battery compartment. The battery must be replaced when the remote control’s range
decreases noticeably or when the indicator lamp
(1)
no longer lights when a button is pu
are arranged in two columns: left column =
ON
/ right column =
keys on the left column to activate channels 1 to
4
individually.
keys on the right column to deactivat
e channels 1 to 4
individually.
on the left column to activate channels 1 to
4
simultaneously.
on the right column to deactivate channels 1 to
4
simultaneously.
lights up each ti
me a key is pressed.
and the dimming function will depend on your radio
-
controlled power outlet. You can fnd
detailed information in the operating instructions of your radio
-
controlled power outlet.
an unlimited number of compatible radio
-
controlled power outlets
Battery type ..............................CR2032
4 channels+ G channel
92
MHz
.......max. 30 m (in open area)
38
x 13 mm
g
Do not ingest battery, Chemical Burn Hazard
This product contains a coin / button cell battery. If the
coin / button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death.
2. Insert one round cell battery, type CR2032, into the battery recess. The positive pole should face upward
t on the battery). Push the battery all the way into the battery recess.
3. Close the battery compartment. The battery must be replaced when the remote control’s range
no longer lights when a button is pu
shed.
/ right column =
OFF.
individually.
individually.
simultaneously.
simultaneously.
controlled power outlet. You can fnd
controlled power outlet.
controlled power outlets
coin / button cell battery is swallowed, it can cause severe internal