Operation Manual

RioVolt SP-90 User Preference Guide

Welcome to the RioVolt SP-90 User guide. The firmware has many user configurable features,

and is designed to help you understand the features available to you, and to show you how to

customize the player to your preferences. This guide only deals with the User Preferences. To

access the User Preferences, press and hold down the EQ/Menu button.

Part 1 - User Preferences Layout

Part 2 - Navigation

PAGE 1
RioVolt SP-90 User Preference Guide Welcome to the RioVolt SP-90 User guide. The firmware has many user configurable features, and is designed to help you understand the features available to you, and to show you how to customize the player to your preferences. This guide only deals with the User Preferences. To access the User Preferences, press and hold down the EQ/Menu button.
PAGE 2
Part 1 - User Preferences Layout Below is the layout of the User Preferences. Each option is described in mroe detail after the chart. Resume (on, off) Speed (1x, 2x, 4x, 6x) Beep (off, on) File Ext (off, on) Tag (off, on) CD ESP (10sec, 40sec) Settings Definitions Resume: With this feature enabled, if you stop the player or power it off, the last used play mode and play position will be retained, along with the previous volume and EQ setting.
PAGE 3
Part 2 - Navigation To access the User Preferences, long press the EQ button. This will bring you to the list of options. Short pressing the Joypad up and down will scroll through the category list. The list will loop, so when you get to the bottom (CD ESP) and press down again, it will cycle you to the top of the list (Resume). Once in the category, a short press to the right button on the Joypad (Fast Forward) will change to the next option for that setting. These options will cycle through the choices.