Owners Manual

ManualsBrandsRinnai Tankless ManualsAccessoriesRinnai Deluxe Tankless Water Heater Wall-Mounted Controller with Thermostat, Clock And Call Features

Rinnai America

FF Models

G E N E R A L C O N T R O L L E R I N F O R M ATI O N

The controller(s) for the Rinnai Water Heater allow the customer to control the functions of the

water heater and to diagnose certain fault conditions

REMOTE CONTROLLERS IDENTIFICATION

MC-91-1US (comes with the unit)

MC-100V-1US (optional)

BC-100V-1US (optional)

Summary of content (7 pages)

PAGE 1
G E N E R A L C O N T R O L L E R I N F O R M AT I O N REMOTE CONTROLLERS IDENTIFICATION MC-91-1US (comes with the unit) MC-100V-1US (optional) BC-100V-1US (optional) The controller(s) for the Rinnai Water Heater allow the customer to control the functions of the water heater and to diagnose certain fault conditions Rinnai America 11 FF Models
PAGE 2
R E M O T E C O N T R O L L E R O P E R AT I O N In Use Indicator Indicates that a hot water tap is open and that control of the temperature has been taken at another controller. Priority Indicator Digital Monitor Indicates the selected water Indicates whether this controller has priority control over the water temperature temperature. Error messages ﬂash in the event of a failure. Priority Pressing takes control of the water temperature by this controller only when all taps are off.
PAGE 3
DELUXE CONTROLLER ABOUT THE DELUXE CONTROLLER (MC-100V-1US) Digital Monitor Indicates the selected water temperature. Error messages flash in the event of a failure. Thermostat Increases or decreases the desired water temperature. In Use Indicator Indicates that a hot water tap is open and that control of the temperature is taken at another controller. Function Enables the user to set the clock and sound volume functions. Water Temperature Indicator Indicates the selected hot water temperature.
PAGE 4
DELUXE CONTROLLER Setting The Sound Volume To do this, press the ‘Function’ Button, the default voice prompt sound volume is medium, each and Button will cycle through the available volume settings in subsequent press of the the following order: High Voice - Off Voice (beep) - Off Sound (no beep) - Low Voice - Medium Voice. Setting The Clock (MC-100V Deluxe Controller ONLY) The clock is a 12 hour AM/PM style display. To set the time, press the ‘Function’ Button twice and Buttons to adjust the time.
PAGE 5
D E L U X E B AT H R O O M C O N T R O L L E R Setting the Sound Volume The voice prompt sound volume for all Deluxe Controller(s) can be set individually. To do this, press the ‘Sound Vol.’ button. The default voice prompt sound volume is medium, each subsequent press of the ‘Sound Vol.’ will cycle through the available volume settings in the following order: High Voice - Off Voice (beep) - Off Sound (no beep) - Low Voice - Medium Voice. Press the ‘Sound Vol.
PAGE 6
DELUXE BATHROOM CONTROLLER IT IS THE CUSTOMERS RESPONSIBILITY TO MONITOR THE BATH FILL REMOTE CONTROLLER FUNCTIONS. OPERATING THE WATER SMART / BATH FILL BUTTON The ‘Water Smart / Bath Fill’ button allows a preset water volume and temperature to be selected and run automatically. Initial Settings When you press the ‘Water Smart / Bath Fill’ button, a Shower / Bath Volume will appear on the indicator.
PAGE 7
DELUXE BATHROOM CONTROLLER Using Water Smart/ Bath Fill Press ‘Water Smart / Bath Fill’ button once. The ‘Water Smart / Bath Fill’ button will illuminate and a tone will sound. The ‘Bath’ indicator will also be displayed in the kitchen Controller monitor (Deluxe Models ONLY). The voice prompt will say “The hot water system is ready. Open the hot water tap”. Open the hot water tap for the relevant shower or bath.