Precaution Thank you for purchasing this digital instrument.For perfect operation and security,please read the manual carefully and keep it for future reference. Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol within an equilateral triangle is in tended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
FCC warning statement 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.
Thanks For Using Our Digital Piano Your digital piano is a high-quality digital piano with 88 standard touch sensitivity keyboard and combines the most advanced PCM tone generation technology. This digital piano lets you record your performances and Registration settings to a USB Disk. Each user song lets you record up to sixteen independent tracks. In order to obtain maximum performance and enjoyment, please read this manual thoroughly while trying out the various features described.
Contents Panel Control ................................ Connectors .................................... Using AC Power Jack ................... Using Headphones ....................... 3 4 4 4 Auto Accompaniment Control ................................................... 30 Straight Start ............................... 30 Synchro Start .............................. 30 Using Foot Pedals ....................... 5 Using MIDI IN/OUT Jack ............ 6 Using Line IN/OUT Jack .............
1
Panel Contents 1. POWER 2. VOLUME CONTROLS MASTER VOLUME RHYTHM BASS/CHORD 3. MULTI DISPLAY 4. [ TRANS ] Button 5. [ TUNE ] Button 6. [ KB.VOL ] Button 7. [ TEMPO ] Button 8. [TAP/TEMPO] Button 9. [O.T.S] Button 10. [METRO] Button 11. [REVERB] Button 12. [CHORUS] Button 13. [SUSTAIN] Button 14. [CHORD] Button 15. [FADE] Button 16. [SYNCHRO] Button 17. [START/STOP] Button 18. [INTRO/ENDING] Button 19. [FILL IN] Button 20. [VARIATION] Button 21. [SPLIT] Button 22. [HARMONY] Button 23. [DUAL] Button 24.
Connectors Using AC Power Jack Connect the power cable to the AC power jack on the rear panel of the piano body. AC POWER CAUTION Plug the power cable into an AC power outlet. Caution 1.Ensure the piano is turned off when connecting and disconnecting the power. 2.Turn the volume switch to reach the minimum level before turning on the power Using Headphones Two sets of standard stereo headphones can be plugged in here for private practice or late-night playing.
Using Foot Pedals Connect the plug of the foot pedal unit to the pedal jack on the rear panel. 1. Damper Pedal (Right) It performs the same function as the damper pedal on an actual acoustic piano, letting you sustain the sound of the voices even after releasing your fingers from the keys. SUSTAIN 2.
3. Soft Pedal (Left) The Soft Pedal controls the sound volume. Press the pedal to decrease the output sound volume. SOFT Using MIDI IN/OUT Jack MIDI (Musical Instrument Digital Interface) is a world-standard communication interface which allows electronic musical instruments to communicate with each other, by sending and receiving compatible note, program change and other types of MIDI data. MIDI IN MIDI OUT MIDI IN NOTE MIDI IN Receives MIDI data from another MIDI device.
Using Line IN/OUT Jack The audio output from other sound system connected to the LINE IN jack on the rear panel can be mixed with the sound of the unit. This function is convenient when you want to play along with a favourite song. LINE IN Stereo System The Line out jack can be used to deliver the output of the piano to a keyboard amplifier, stereo sound system, mixing console or tape recorder. LINE OUT Stereo System Using USB-MIDI This product allows the transfer of MIDI over USB.
Basic Operation Power Switch Turn the power on by pressing the [POWER] switch, the panel LCD display will light. POWER OFF ON RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 Adjust the Volume Use [MASTER VOLUME] control to adjust the volume to your desired level.
2. Stop Playing Press [DEMO] button again to stop playing. RII GHT LEFT RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 DEMO 3. Adjust Demo Song's Volume Each song has two tracks performance (left hand and right hand). You can use [RHYTHM] control to adjust left hand volume, and use [BASS/CHORD] control to adjust right hand volume.
Tempo Press the [TEMPO ] or [TEMPO ] button to decrease or increase the tempo of songs, metronome and styles. Range: 20-280. Press [TEMPO ] and [TEMPO ] button simultaneously to reset the tempo to default value. TEMPO RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 TEMPO Tap/Tempo This function allows you to set the rhythm tempo by tapping in tempo on [TAP/TEMPO] button. Tap on the button 2 times while rhythm is playing, The rhythm tempo are set as your desired speed.
Use [TRANS / ] button to transpose up or down as required. The transposition range is from -12 (down one octave) through 0 (normal pitch) to 12 (up one octave). TRANS RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 Tune This function makes it possible to tune the pitch of your instrument to match other instruments. The tune range is from -64(down one semitone) through 0 (normal pitch) to 63 (up one semitone).
Adjusting Reverb Depth Reference: F2 Reverb and Chorus Depth(P.16). Chorus Shimmering, broadening effect. Press [CHORUS] button, use [+] and [-] buttons to select chorus type. No chorus is produced when you select 'OFF', and the indicator is off. CHORUS RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 The chorus types in the list below can be selected from the chorus display.
Metronome Metronome is a convenient feature for practice, and it can also provide a solid rhythmic guide when recording. The metronome sound is alternately turned on and turned off by pressing [METRO] button. The time signature of the metronome can be set by using [+] and [-] buttons while turning on the metronome function. Time signature: 1/4, 2/4, 3/4, 4/4, 6/4, 3/8, 6/8, 9/8. METRO RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 To set the tempo of metronome, please see the details in TEMPO section(P.10).
Touch The touch function provides four different types of keyboard touch sensitivity that can be selected to match different playing styles. Press the [TOUCH] button, use [+] and [-] buttons to select the touch sensitivity type in the range of 00 to 03. Default: 02 . TOUCH RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 Description No Name 00 Fixed means that regardless of how hard you play, the keyboard will transmit a velocity value of 100.
Function The [FUNCTION] button provides access to a range of functions that give your instrument extraordinary versatility. The functions are categorized in groups as follows: F1 ................................................................................ Pan F2 ...................................................... Reverb and Chorus Depth F3 ........................................................................... Octave F4 .........................................................
M .PAN-------Main Voice Pan S. PAN--------Split Voice Pan D. PAN-------Dual Voice Pan Press [ENTER] button to confirm, and use [+] and [-] buttons to set the pan value: From -64(Left) to 63(Right). ENTER RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 F2 Reverb and Chorus Depth In this function you can adjust the reverb and chorus depth for the selected voice. Press [FUNCTION] button to select M. RevVo? , Use [+] and [-] buttons to select S. RevVo? , D. RevVo? , M. ChrVo? , S. ChrVo? , D.
Press [ENTER] button to confirm, use [+] and [-] buttons or number buttons (0-9) to adjust the value: 00-63 ENTER RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 F3 Octave Press [FUNCTION] button to select to select S. Octav? and D. Octav? . M. Octav? , Use [+] and [-] buttons FUNCTION RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 M. Octav?------Main Voice Octave S. Octav?------ Split Voice Octave D.
F4 Split and Chord Point In this section, you can set the split or chord point when your keyboard is in Split or Chord mode. Press [FUNCTION] button to select to select C. Point? . S. Point? , and use [+] and [-] buttons FUNCTION RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 S. Point?------Split Point C. Point?------Chord Point Press [ENTER] button to confirm, use [+] and [-] buttons or number buttons (0-9) to set the point. Range: 00-87.
MIDI R0------Reception Disabled MIDI R1------Reception Enabled MIDI S0------Transmission Off MIDI S1------Selecting Main Voice Ch MIDI S2------Selecting Split Voice Ch MIDI S3------Selecting Dual Voice Ch Press [ENTER] to confirm, and use [+] and [-] buttons to set the parameters.
Press [ENTER] button to confirm, use [+] and [-] buttons to select or local off . Local on ENTER RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 Local on------ Normal operation. Keyboard and Controllers are sent to the Sound Engine. Local off------ There will be no sound produced by the brain's tone generator. MIDI function can work as usual. F7 Auto Track Here you can turn on or turn off AUTO TRACK function for recording mode. And the setting will be saved automatically when the power is off.
Press [ENTER] button to confirm, and use [+] and [-] buttons to select OnAutoTrk and OffAutoTrk . ENTER RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 OnAutoTrk------when you want to record more tracks data, select OnAutoTrk , the piano brain will assign the next track for you automatically. OffAutoTrk------when you want to select tracks by yourself, here you have to select OffAutoTrk function first, then press [TRACK] button on the panel to select the track you want.
Voices Selecting a Voice Your instrument has 128(01-128) GM standard voices. 10(129-138) different drum percussion kits and 1 set of sound effect that you can select and play. Press [VOICE] button, the voice mode is selected and the current voice number and the name will display on the Message Display section. VOICE RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 Use [+] and [-] buttons or number buttons [0-9] to select the desired voice according to the voice list.
Dual Mode Press [DUAL] button to select layer voice mode, two voices will sound simultaneously when you play keyboards. 1. Select Dual Voice Press [DUAL] button, Dual Cursor is flashing, use the number [0]-[9] or [+] and [-] buttons to select the second voice. If you don' t choose the second voice within 4 seconds, the LCD Display will go back to the first voice mode. SPLIT HARMONY DUAL TWIN RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 Dual Mode 2.
Split Mode Press [SPLIT] button to select split mode, your keyboard will be split into two sections which means different voices can be played with the left and right hands at the same time. 1. Select Split Voice Press [SPLIT] button, the Split cursor is flashing, and the split voice will appear in the message display for 4 seconds, and use [0-9] buttons to select the left voice. SPLIT HARMONY DUAL TWIN RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 Split Cursor 2.
Adjusting Keyboard Volume Use this function can adjust the Split Voice Volume, Dual Voice Volume and the Main Voice Volume. 1. Split Voice Volume In Split mode, press [KB.VOL / ] button can adjust the split voice volume while the Split Cursor is flashing. KB.VOL RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 2. Dual Voice Volume In Dual mode, press [KB.VOL / ] button can adjust the Dual voice volume while the Dual Cursor is flashing. KB.VOL RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 3.
Playing Portable Grand Piano Press [GRAND PIANO] button. This convenient function lets you instantly call up the Grand Piano voice. GRAND PIANO RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 One Touch Setting This function is actually a convenient feature which automatically selects a suitable voice for you when you select a style.In addition, various panel settings (such as voice, effect, Tempo, etc.) that match the selected style can be recalled with just a single button [O.T.S]. Press [O.T.
Auto Accompaniment Your instrument has 100 accompaniment styles which can be used to provide Fully-orchestrated Auto Accompaniment. When the Auto Accompaniment function is turned ON, this instrument creates fully-orchestrated rhythm, bass and chord accompaniment based on chords you play with the left hand in the Auto Accompaniment section of the keyboard(i.e. all keys to the left of the Auto Accompaniment split point). The right-hand section of the keyboard is available for normal playing.
3. Start Playing the Style Press [START/STOP] button to start the rhythm track of the Auto Accompaniment. Minus the bass and the chord tracks. SYNCHRO START/STOP RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 4. Stop Playing the Style Press the [START/STOP] button again to stop the accompaniment. Using Auto Accompaniment (All Tracks) 1. Press the [STYLE] Button STYLE RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 Style Cursor 2. Selecting a Style Using [+] and [-] buttons or number buttons [0-9].
3. Turn the Chord Function On Press the [CHORD] button The left hand section of the keyboard becomes the Auto Accompaniment section, and chords played in this section are automatically detected and used as a basis for fully automatic accompaniment which the selected style. CHORD Chord Cursor FADE RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 4. Turn On the Synchronized Start Press [SYNCHRO] button The beat lamp will flash in time with the tempo, it's called synchronized start standby.
Auto Accompaniment Control Straight Start The [START/STOP] button starts the selected accompaniment style immediately. A different accompaniment style can be selected at any time while the accompaniment is playing. SYNCHRO START/STOP RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 Synchro Start Press the [SYNCHRO] button, then the accompaniment will start when you play the first chord on the AUTO ACCOMPANIMENT section of the keyboard.
Adding Fill-In Press the [FILL IN] button at any time while the accompaniment is playing to add a one-measure fill-in. If you press the [SYNCHRO] button and then the [FILL IN] button, the accompaniment will start from the fill-in as soon as a chord is detected in the AUTO ACCOMPANIMENT section of the keyboard.
Fade Press [FADE] button makes rhythm fade up when starting the rhythm. While rhythm is playing, press [FADE] button to make rhythm fade away. CHORD FADE Harmony The harmony function features a variety of performance effect that enhance the melodies you play when using the accompaniment styles. Press [HARMONY] button, the Harmony Cursor appears on the display.
SINGLE Mode SINGLE Mode fingering makes it simple to produce beautifully orchestrated accompaniment using major , seventh , minor and minor-seventh chords by pressing a minimum number of keys in the Auto Accompaniment section of the keyboard . The accompaniment produced is perfectly matched to the currently selected accompaniment style. Major Chords C If you press a C key in the left-hand section of the keyboard, for example, a C-major accompaniment will be played.
Fingered Mode Fingered Mode is ideal if you already know how to play chords on a keyboard, since it allows you to supply your own chords for the Auto Accompaniment feature.
User Style This digital piano can play RINGWAY Style(*.RTY) and YAMAHA Style(*.STY). Copy the RINGWAY Style(*.RTY) or YAMAHA Style(*.STY) from computer to your USB Disk Insert the USB Disk into the USB terminal. Press [FILE] button, use [+] and [-] buttons to select RINGWAY Style (*.RTY) or YAMAHA Style (*.STY). FILE RECORD PLAY/LOAD RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 MULTI DELETE Press [PLAY/LOAD] button.
Press [STYLE] button, use number buttons to select 101 USER Rhy . Now the RINGWAY Style or YAMAHA Style can be used as usual by pressing Rhythm Control buttons. STYLE RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 NOTE Some YAMAHA Styles have four variations (Main A, Main B, Main C and Main D), only two variations (Main A and Main B) will be recognized by your instrument. Only one User Style can be loaded once. And the User Style will be lost after playing MIDI file.
Registration Memory Your instrument registration memory can be used to store six sets of voice and auto accompaniment settings that can be recalled during you playing at the touch of one single button. Memorizing the Settings 1. Select the Desired Bank Press the [STORE/BANK] button repeatedly to select the bank [1MmryBank] -[4MmryBank]. STORE/BANK RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 2.
Recalling the Settings 1. Select the Appropriate Registration Memory Bank Press the [STORE/BANK] button repeatedly to select the bank [1MmryBank][4MmryBank]. STORE/BANK RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 2. Press the Desired Registration Memory Preset [M1]-[M6] Button The settings stored to a REGISTRATION MEMORY button can be recalled simply by pressing the appropriate button [M1]-[M6].
Press [SAVE] button, a message xREGSTxxx (x indicates this file's sequence Num in UDisk. xxx indicates registration file number ) appears, indicating your Registration Memory Settings are saved to USB Disk, with 24 Registrations stored to a single file. SAVE RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 USB Cursor Use Registration Data from USB Insert the USB Disk into the USB terminal. Use [+] and [-] buttons to select REG file, then press [PLAY/LOAD] button, display shows Load OK .
Song Recording This digital piano lets you record your performances and Registration settings to a USB Disk. Each user song lets you record up to sixteen independent tracks. These include not only the voices for the keyboard performance, but also the auto accompaniment parts. It provides two different ways to record: Quick Recording and Multi Track Recording. (All the recording data will be saved automatically as MIDI Format 0 File to your USB Disk). Quick Recording 1.
3. Stop Recording Press [RECORD] button again to stop recording. Recording stops and your performance is written to the song. The song to which your performance is recorded is automatically named xMUSIC xxx (x indicates this file's sequence Num in UDisk. xxx indicates the recording file number). You can edit the song as desired by computer or midi edit soft.
Multi Track Recording Multi track recording provides two ways to record: 1.Use Auto Track Assignment. 2.Select Tracks by yourself. 1. Use Auto Track Assignment 1.1 Insert the USB Disk Into the USB Terminal USB 1.2 Turn the Auto Track On Reference: F7 Auto Track(P.20). 1.3 Start Recording Press the [RECORD] button to start recording. (The first two measures are tempo prompt only. It cannot record any data). When the recording is finished, the recording file will be saved with the name 1 MUSIC000 .
1.5 Hold Down the [FILE] Button, Then Press [RECORD] Button The next track will be given automatically. The performance will be recorded to the next track on the basic of 1 MUSIC000 . When the recording is finished, the recording file will be saved as a new file named 2 MUSIC001 . FILE RECORD PLAY/LOAD RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 MULTI DELETE 1.6 Use the Same Operation as Step 5 to Record More Tracks. The Name of the New File Will be Saved in Sequence. 1.
2.2 Turn the Auto Track Off Reference: F7 Auto Track(P.20). 2.3 Select Recording Track Press [TRACK] button repeatedly can select three voice mode, you can use [+] and [-] buttons to select the track(01-16) in each mode. TRACK FILTER RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 R. RecTrk------to select the Main Voice track(01-16, OFF) L. RecTrk------to select the Split Voice track(01-16, OFF) D. RecTrk------to select the Dual Voice track(01-16, OFF) 2.
2.5 Repeat Step 3 to Select Next Track 2.6 Hold Down the [FILE] Button, Then Press [RECORD] Button The performance will be recorded to the desired track on the basic of 1 MUSIC000 . When the recording is finished, the recording file will be saved as a new file named 2 MUSIC001 . FILE RECORD PLAY/LOAD RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 MULTI DELETE 2.7 Use the Same Operation as Step 3 and Step 6 to Record More Tracks. The Name of the New File Will be Saved in Sequence. 2.
File Button Use this button you can switch to USB mode immediately even the keyboard is in any of other mode. FILE RECORD PLAY/LOAD RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 MULTI DELETE Filter Button Use this function you can turn on or turn off any tracks and change the metronome ' s tempo before song playing or recording. Press [FILTER] button repeatedly to select the track. FILTER USB.
Adjusting Song's Volume Press [USB.VOL] button while playing song. FILTER USB.VOL RHY1 RHY2 BASS CRD1 CRD2 PAD PHR1 PHR2 Use [+] and [-] buttons or number (0-9) buttons to adjust the song's volume.
Factory Set 1. Turn off the power. POWER OFF ON 2. Hold down [+] and [-] buttons, then turn the power on, it can restore all internal settings to factory set.
Appendix Voice List CHANNEL number 49 CHANNEL number
Style List STYLE NAME NO STYLE NAME NO STYLE NAME 8 BEAT 35 LATIN DISCO 70 MAMBO 01 8BEAT MODERN 36 DISCO 71 SALSA 02 MERSEY BEAT 37 DISCO PARTY 72 BEGUINE 03 SURF POP 38 DISCO FEVER 73 REGGAE 04 8BEAT 39 NEWYORK DISCO 74 05 60'S ROCK 06 HARD ROCK 40 BIG BAND FAST 75 DANCE BAND 07 ROCK SHUFFLE 41 BIG BAND MID 76 ENGLISH WALTZ 08 80'S ROCK 42 BIG BAND BALLD 77 FOXTROT 16 BEAT 43 JAZZ CLUB 78 QUICK FOXTROT 09 16 BEAT1 44 SWING 79 QUICKSTEP 10 16
Percussion Voice List Note# Note Standard(0) Room(8) 24 C Seq Click H 25 #C Brush Tap 26 D Brush Swirl L 27 #D Brush Slap 28 E Brush Swirl H 29 F Snare Roll 30 #F Castanet 31 G Snare L 32 #G Sticks 33 A Bass Drum L 34 #A Open Rim Shot 35 B Bass Drum M 36 C Bass Drum H 37 #C Side Stick 38 D SD Room L Snare M 39 #D Hand Clap 40 E SD Room H Snare H 41 F Room Tom 1 Floor Tom L 42 #F Hi-Hat Closed 43 G Room Tom 2 Floor Tom H 44 #G Hi-Hat Pedal 45 A Room Tom 3 Low Tom 46 #A Hi-Hat Open 47 B Room Tom 4 Mid Tom L 4
MIDI Implementation Chart Function Basic Default Channel Changed Mode Default Messages Altered Note Number :True voice Velocity Note ON Note OFF Affter Key's Pitch Bender Control Change 0,32 1 5 6 7 10 11 64 65 66 67 80,81 91,93 100,101 120 121 122 Programe Change : True System Exclusive System : Song Position : Song Select Common : Tune Aux : Local on/off : All Notes Off Messages : Active Sense : Reset Transmitted Recognized 1-16CH 1-16CH Mode 3 X X 0~127 0~127 O 9nH,v=1~127 O 9nH,v=0 or 8nh X O O O O O
Specifications 53
Assembly Instructions Before moving the piano to a new location, always remember to raise the level of the Pedal Board support so that it is not touching the floo r. Once the piano is in place, you can adjust it so it is in firm contact with the floor again. 10505413V4.