Precaution Thank you for purchasing this digital instrument For perfect operation and security,please read the manual carefully and keep it for futures reference.
Thank you for choosing the Digital Piano Your piano is a high quality digital piano featuring an 88 note hammer action, touch sensitive keyboard and the most advanced PCM tone generation technology that combined will provide you with arch performing and playing experience. You can also record your own performances or record your own accompaniment to play along to. The piano is more than great technology, your digital piano is also a stylish piece of furniture that will look great anywhere in your home.
Panel Control «scaremongers SIR sororssesrnsoscrsessesrn Basic Operation Standby/On Auto Standby Deactivate Auto standby Function Adjusting Volume & Start Playing Piano Pedals Piano Reset Playing Demo Song: The Connector Headphones MIDI OUT Line Out Using USB MIAPLACIDUS Audio AUR smokescreens Nonfunctional Function Mode Resetting the Data Control Knob to Voice Select Using the Voice Select Keys Split Mode Layer Mode Twin Erp On/Off Octave Transpose Master Tuning Reverb Chorus Metronome Song Recording To Re
CL RICE MASTER VOLUME Pro ™ RES 1 2 STANDBY/ON Metronome! Fiction 0 7 STANDBY/ON MASTER VOLUME LED DISPLAY Metronome/Left Button Function/Right Button “r “oy Record Button Demo/Learn Button Data Control Knob La EE AEE al ol Data Control [Assignable]
Rear Panel Madcap PEDAL DOJ ® @ 9. Pedal Connector 10.DCI12V Connections Panel Bul 11.Headphones 1/2 12. MIDI Out 13. USB to Host Connector 14. Pauline 15.Line Gut 16.
You are no doubt eager to play your new piano instrument, but first please make sure you have completed the following basic setup steps: 1) Follow the assembly instructions as outlined on page 46 in the appendix of this manual. 2) Once the piano is securely assembled, connect the plug of the foot pedal unit to the pedal jack on the rear panel. 3) Plug the other end of the power cable into the power outlet. NOTE 1.Ensure the piano is turned off when connecting and disconnecting the power. 2.
Basic Operation Standby/On Press the [STANDBY/ON] button to turn on the power and the LCD display will light. Rk frm FP no Auto Standby Your piano will switch off automatically in 30 minutes after no any operation ont. In this case, press the [STANDBY/ON] button again to turn on the power. Deactivate Auto Standby Function + 1 Hold the first white key and first black key on the left side of the keyboard at the same time |zz= CN i and then press the [STANDBY/ON] button to deactivate the Auto Standby function.
Ostentation Pedal (Center) The ostentation pedal also allows you to sustain notes, but it works a little different from the damper pedal. If you play a note or chord on the keyboard and press the ostentation pedal while the notes are held, those notes will be sustained as long as the pedal is held. All subsequently played notes will not be sustained. Soft Pedal (Left) The soft pedal on an acoustic piano changes the character of the sound, making it softer and quieter.
Playing Demo Songs There are 16 preset piano songs that you can play individually. Here's how you can select and play the demo songs. Listening to the Demo Song Press the [DEMO/LEARN] button to enter Demo Play Mode and the button will flash. Demode_ 7 Press the button to hear Demo Song 1.
The Connector Box Headphones The piano is equipped with two sets of standard stereo headphone jacks to accommodate private practice or late-night playing. The internal speaker system is automatically shut off when a pair of headphones is plugged into the 1. Headphone jack.
are plugged in to the 1. Headphone jack. 1S O28%g | Using Audio This product allows the transfer of MIDI information over USB to a computer. As complicated this might sound, it's actually pretty straight forward. Because your piano is USB Class Compliant, there is no need to install a driver to enable it to work with compute. Simply just plug it in and the OS will do the rest. The piano will work with all standard MIDI based computer software. USB AUDIO interface is a digital audio interface.
Function Mode In Function Mode, the keys on the piano keyboard do not make any sound. Instead, the keys are used for selecting and editing advanced functions. In most cases, an edit function is selected using the keyboard, and the Data Control knob is used to increase or decrease the value of the selected editing parameter. To enter Edit Mode, press the Voice/Function button.
Using the Voice Select Keys The Voice Select keys offer an alternative method of selecting voices. To Select Different Voices Using Voice Select Keys: Press the [Function/Right] button to enter Edit Mode. The LED in the [Function/Right] button will light. Press and release one of the Voice Select keys on the keyboard.
Split Mode in SPLIT mode, your keyboard will be split into two sections which means different voices can be played with the left and right hands at the same time. Use Split Mode Press the [Function/Right] button to enter Edit Mode. Press the BB-1 key to enter Split Mode. The LED display will show: £3 This will be displayed for 3 seconds. You can select the split voice by turning the Data Control knob or reference to voice 3 seconds. After seconds, it will change to show the currently main voice.
SPL The LED will show the value you selected. Range: 00-87. JH Data Central © [Assignable] To Independently Control Volume Levels of Left Hand and Right Hand Voices: 1.Left Hand Voice Volume: Press the [Function/Right] button to enter Edit Mode. Pro oh Press the BbO key to assign the Data Control knob to control the Split Voice (Left Hand Voice) volume.
Use the Data Control knob to select a Split Voice volume level between 0 {minimum) and 127 (maximum). You can play as you do this to hear the volume change. £3 £3 Data Control © [Assignable] 2.Right Hand Voice Volume: Press the [Function/Right]] button to enter Edit Mode. TE = Press the #F0 key to assign the Data Control knob to control the Right Hand Voice volume. The LED display will show: 127 Use the [Data Control] knob to select a Right Hand Voice volume level between 0 (minimum) and 127 {maximum).
80 Data Control [Assignable] To turn off Split Mode: Press the [Function/Right] button. BO Press the Split Mode key (BB-1) to turn off Split Mode. The display will show “off” for 3 seconds. Then the LED display will return to showing the name of the currently selected Voice. oFF Layer Mode In Layer Mode, this piano will play two voices simultaneously on each key. To use Layer Mode: Press the [Function/Right] button to enter Edit Mode.
Press and hold down a Voice Select key {any white key in the lowest octave of the piano). This will select the Main Voice. (See the section on Using the Voice Select Keys at the beginning of the Edit Mode Functions section for more information on selecting voices in this manner.} While continuing to hold the first Voice Select key, press a second Voice Select key. This will select the Layer Voice. While both keys are held down the display will show: ~ I 3 This piano is now in Layer Mode.
Press the Layer Volume key (baa. 015 Use the Data Control knob to select a Layer Voice volume level between 0 (minimum) and 127 (maximum). You can play as you do this to hear the volume change. Data Control {assignable] To Adjust the Volume of the Main Voice: Press the [Function/Right] button to enter Edit Mode.
NOTE If Split Mode is engaged and Layer Mode is selected, the Layer Voice will only be applied to the keys to the right of the split point. The Left Hand Voice will remain the same as was specified for Split Mode. To Turn Off Layer Mode: Press the [Function/Right] button to enter Edit Mode. EPC Twin Mode In Twin mode, the keyboard will be separated into two play areas. Use Twin Mode Press the [Function/Right] button to enter Edit Mode. Press the #C0 key to enter Twin Mode.
To turn off the Twin Mode: Press the [Function/Right] button. { TL Luge 7 Press the Twin Mode key (#C0) to turn off the Twin Mode. The display will show “off” for 3 seconds. oFF Erp On/Off Your piano will switch off automatically in 30 minutes after no any operation on it. In this case, press the [STANDBY/ON] button again to turn on the power. Use Erp On Press the [Function/Right] button to enter Edit Mode. Press the bEO key to enter the Erp On Mode.
To turn off the Erp Mode: Press the [Function/Right] button. . NE Press the Erp On/Off key (bB0) to turn off the Erp Mode. The display will show “off” for 3 seconds. off F Octave Pressing this key will set the Data Control knob to increase or decrease the octave setting. Press the [Function/Right] button to enter Edit Mode. =. Pro Fug 04 Press the Octave Key (baa.
Use the Data Control knob to select the desired Octave. Turning the Data Control knob clockwise will raise the keyboard's pitch in octave increments, and turning it counter-clockwise will lower it in octave increments. ooe Data Control [Assignation] Transpose Pressing this key will set the Data Control knob to increase or decrease the keyboard's transpose value. Press the [Function/Right] button to enter Edit Mode.
Use the Data Control knob to select the desired Transpose Value. Turning the Data Control knob clockwise will raise the keyboard's pitch in semitone increments, and turning it counter-clockwise will lower it in semitone increments. oo4 Pisa Corral {assignable] Master Tuning Pressing this key will set the Data Control knob to raise or lower ( “fine-tune” ) the Master Tune setting of the piano. Press the [Function/Right] button to enter Edit Mode. Press the Master Tuning key (bbl.
Use the Data Control knob to select the Master Tuning. The LED display will show a positive, negative, or zero value between -64 and 063. Of course, this piano never actually “goes out of tune,” but the Master Tuning feature can be useful when you are playing along with another instrument or recording that may be slightly above or below standard pitch.
To Set the Keyboard Sensitivity: Press the [Function/Right] button to enter Edit Mode. Press the desired Touch Select key (F3, #F3, bA3, bbl. The LED display will show the selected Touch setting. Please note that these keys are in the middle of the keyboard. If you need help locating them, please refer to the included laminated Special Function Key chart. hod nor ~~ © Reverb In Reverb mode, you can select a number of digital reverb effects that you can use for extra depth and expressive power.
005 Use the Data Control knob to select the desired Reverb Type. Turning the Data Control knob select the desired Reverb Type. 001: Hall 1; 002: Hall 2; 003: Room 1; 004: Room 2; 005:Room 3; 006: Stage 1; 007: Stage 2; 008: Plate; 009: Delay ; 010: Echo (Default: 005) oos Data Control [Assignable To Turn Off the Reverb type: Turn the Data Control knob until the LED show “G08” to turn off the Reverb type. To Adjust the Reverb Level : Press the [Function/Right] button. GY \, Ra Press the Reverb Level key The
Turn the Data Controller knob to adjust the reverb level setting. The minimum setting is 000, and the maximum setting is 127. Data Control [Assignable] Chorus To Select the Chorus Type: Press the [Function/Right] button to enter Edit Mode. Pro Fun ) Right ~.7 Press the Chorus Type key (Ab. The LED display will momentarily show: § 31 ooo Use the Data Control knob to select the desired Chorus Type. Turning the Data Control knob select the desired Chorus Type.