Tempo The tempo of the metronome may range from 20 to 280 beats per minute (BPM). [FUNCTION = METRONOME TEMPO O To change the tempo, press and hold the button for 3 seconds to change the setting. The LED will blink to the current tempo speed. If the Metronome is off, no sound will be heard. Press a key on the keyboard to select a tempo. The LED will blink to the new value, It Is possible to make multiple changes and see the LED tempo change as the keys are pressed, To exit, press the tempo button.
In Edit Mode the keys on the keyboard are used for selecting the Function to be edited. To enter Edit Mode, press the Metronome and Tempo buttons at the same time. Function Key Assignments ALL Touch Fixed Please refer to pages 14 and 11 for information about the Metronome and Layer functions. Master Tuning The Plano Is tuned to A440 when the power Is turned on and does not require tuning. However, if desired, the tuning may be adjusted in small increments from -64 to +63 cents (one semitone).
Pressing any key from C3 and up will play the ¢3 note but at tuning settings proportionately so that its possible tune up by a whole semi teen. The user will use his ears to determine the correct tuning setting.LED display will be synchronous display values.See the Appendix for the value ranges. Press the [METRONOME ] and the [TEMPO] buttons again to exit Edit Mode.
EQ Adjustment To change the sound of your plane's amplifier you can adjust the EQ to add more Bass or to remove some of the Treble. To Change the Bass Response 1. Press the [METRONOME] and [TEMPO] Buttons together to enter the Function Edit mode. 2. Press the A®5 piano key activates the Bass EQ Function | | 3.The Bass EQ can be changed by pressing white piano keys only from the A-1 piano key to D3 piano key.LED display will be synchronous display values.
3. The Treble EQ can be changed by pressing white piano keys only from the A-1 Plano key to D3 piano key. Pressing the F1 Piano Key sets the Treble EQ to its center point EQ Setting. Pressing the A-1 Piano Key will reduce the Treble response by -12dB. Pressing the D3 Plano Key therefore Increases the Treble response by 12 dB. For Example to set the Treble EQ setting to 10 dB you would press the B2 white piano key. To set the Treble you would press the EQ piano key.
MIDI Channels MIDI Cut channel values range from change the MIDI Out Channel Value: While in the Edit Mode press the A%0 key the amount of times that correspond to the MIDI Out Channel that you desire. LED display will be synchronous display values. The default MIDI Out channel is 1.
your computer) without playing the Internal sounds of this Plano. You may also find other occasions (such as when you are using MIDI sequencing software on your computer) where it is useful to turn Local off. Press the [METRONOME] and the [TEMPO] Buttons together to enter the edit mode. [~ FUNCTION — METRONOME TEMPO Press the Local On/Off key {D"1) to switch local on or off. LED display wil be synchronous display the state. If you press the D*1 key again you will need to re-enter your desired settings.
Press the Panic Key (C°1) allows the user to activate Panic, which send out general MIDI reset messages such as all note off, etc. Once Panic reset has been completed, Piano will automatically exit Edit mode.
Performing a Factory Reset will clear all battery backed memory and restore all functions to their factory defaults, just like they were when you used this piano for the first time. 1. Turn the Power Off. 2. Hold down the [REVERB] and the [CHORUS] buttons while powering on the piano. BEG REVERB CHORUS LED will display rSt. When the [REVERB] and the [CHORUS] buttons are released, this piano will return to Performance Mode (ready-to-play). All button LED will return to their default states.
MIDI Implementation Chart Incipience Transmitted Recognized Remarks Basic Default 1-18 1-16 *Up to 3 channels Chanson Changed 1-16 1-18 simultaneously Mode Default Mode 3 Mode 3 Messages Yes No Altered wrens He: Note True vole o~i27 0-127 Huber xa Velocity Note ON Yes Yes Iota Hoke OFF Yes Yes After Key's Ho Nn Touch Channels Ho No Pitch Benet Im [ 8-127 control change 200151 oath, 108,421 Program 0-127 hae Tue Yes* “The controller will recognize and respond to GM Device System Excessive regularities.
Parameter adjusting instructions According to chart shown below, choose corresponding key to set the desired values. Tuning Voice Layer Metro.
Tuning Voice Layer Metro. Reverb Chorus Tempo Treble Bags F& 116 120 120 120 120 120 235 118 121 121 121 121 121 240 Xx X G6 119 122 122 123 122 122 245 120 123 123 123 123 123 250 x x AS 122 124 124 124 124 124 255 123 125 125 i125 125 125 260 Xx Xx |: 125 126 126 128 126 126 270 Xx Xx <7 i27 127 127 i127 127 127 280 x Xx — Note: X: Mo value available for this particular Edit Function on this key. Resetting Value: i : Auto | Voice | Layer | Metro.
Keyboard: Display: Voice: Polyphony: Voice Control: Metronome: Pedal Response: Effect: Demo Songs: MIDI & Audio: Connectors: Speakers: Dimensions(W Weight: Supplied Accessories: 88 weighted velocity-sensitive keys Multi Function LED Display 8 az Layer.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation Is subject to the following two conditions: {1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Cartesian Virgin Musical Instrument Company Inc PO Bax 2808 La Mesa, CA $1943 PH: 819 244-0008 E-mail: www.virginmusicalinstruments.