Precaution Thank you for purchasing this digits] instrument. For perfect operation and scourity,plesse read the manual sere fully and keep it for future reference. CAUTION 1 msl | I hav The Lightning flesh with arrowhead symbol within an equilateral triangle is in tended to alert the user to the presence of insulated “dangerous voltage” within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock io persons.
Thank you for choosing the A-10 Digital Piano Your A-10 is a high quality digital piano featuring an 88 note hammer action, touch sensitive keyboard and the most advanced PCM tone generation technology that combined will provide you with arch performing and playing experience. You can also record your own performances or record your own accompaniment to play along to. The A-10 is more than great technology, your digital piano is also a stylish piece of furniture that will look great anywhere in your home.
CONTENTS PANEL CONTROL neoconservative 3 CONNECTOR PANEL cumbersomeness 3 1. Using USB-Midi -coreermroerronsone 3 2. Midi In/Out 3. Line In/Out 4. DC 12V Input 5. Phones 1/Phones 2 6. Pedal PANEL CONTROLS 1. Power On/Off 2. Adjust The Volume 3. Adjusting The Sound 4. Demo Play 5, [SETUP] Button 6. LCD Display YES} VOICE & FUNCTIONS 1. Selecting A Voice -B60 LWW Layer Mode 3. Split Mode -10 5. Reverb Effects 11 7. Metronome + ~12 8. Tempo 12 1. Reverb Type Chorus Type --13 3. Reverb Level 14 4.
CONNECTOR PANEL The connector jacks are located on the rear panel of the piano. Baz USHERETTE MIDI IN Mirthful PEDAL LINEN LINE OUT +8 OO) tool 1. Using USB-Midi This product allows the transfer of MIDI information over USB to a computer. As complicated this might sound, it's actually pretty straight forward. Because your A-10 is USB Class Compliant, there is no need to install a driver to enable it to work with computer running OSX, Windows XP, Vista or Windows 7.
CONNECTOR PANEL 5. Phones 1/Phones 2 Two sets of standard stereo headphones can be plugged in here for private practice or late-night playing. The internal speaker system is automatically shut off when a pair of headphones is plugged into PHONES jacks. 6.Pedal Sustain Pedal This digital piano can be used with the Sustain Pedal. It will cause piano key sounds to decay slowly as if they were being held down. A piano-style pedal may optionally be used.
PANEL CONTROLS oe Ojo OO CHO iQ SEC QQ 1. Power Uncommon Turn the power on by pressing the [POWER] switch, the panel LCD display will light. REED FRIAR RE 2. Adjust The Volume Use [MASTER VOLUME] control to adjust the volume to your desired level. 3. Adjusting The Sound Use [TONE] control to adjust the sound of the piano. 4. Demo Play The piano comes per-programmed with a selection of sixteen demo songs. Each of the demo songs is designed to demonstrate one of the instrument voices built into the piano.
PANEL CONTROLS If you want to hear demo songs featuring the Bank B voices (the bottom row of voices including Bright Piano, E.Piano 2, FM EP, press the Variation button. It will light up. While in Demo Mode, as long as the Variation button is lit, pressing a Voice Select button will cause the demo song featuring that button's Bank B voice to play.
VOICE & FUNCTION 1. Selecting A Voice Your instrument has 16 built-in voices, which include several pianos as well as other instruments. These digitally-sampled musical instrument sounds may be selected one at a time. BRAND To select a voice, press the appropriate Voice Select button on the right side of the front panel. NOTE NOTE: When [VARIATION] button is unlighted, you can press the appropriate bunion to select the voice in the first line.
VOICE & FUNCTION 2. Layer Mode In Layer mode two voices may be played simultaneously, each at selected volumes. To enter Layer mode, press [LAYER] button and the LED is flashing, then press the voice button to select the second voice. ‘When [LAYER] button indicator LED is lit but not flashing, press the voice button to select the MAIN voice. ECHOIC $57E To adjust the volume of the Main voice and layer voice, please refer to [SETUP] function, see pages 15 and 16. Press [LAYER] button again to exit. 3.
VOICE & FUNCTION note played with the left hand) may be adjusted and the Split Voice may be changed as desired. Enter Split Mode Press the [SPLIT] button . The indicator is flashing The Split (left hand) voice will be Upright Bass and the Split Point will be G2. SPLIT Change the Split (left hand) voice Press [SPLIT] button, the Split indicator is flashing, then press the voice select or [/ NO] button to select the split voice.
VOICE & FUNCTION Change the Split Point Press the [SPLIT] button The LCD will momentarily display off , then hold down the [SPLIT] button and press the appropriate piano key or use YES] button to Change the Split Point. 1B: EIDER EPL wv Ne Or press [SETUP] button to change it,see page 18. Setting the Split Voice Volume Please refer to [SETUP] function, see page 15. Exit the Split Mode Press [SPLIT] again, the Split indicator turns off and the Split mode is no longer active. 4.
VOICE & FUNCTION Press [DUET] button again to exit the Twin mode. ‘While the DUET feature is selected using the optional 2 lever pedal, the pedals automatically switch in a different configuration where there are 2 Sustain pedals, one for the left and one for the right part of the keyboard. 5. Reverb The [REVERB] button selects a number of digital reverb effects that you can use for extra depth and expressive power. Press [REVERB] button to turn off or turn on the reverb effect.
VOICE & FUNCTION 7. Metronome Metronome is a convenient feature for practice, and it can also provide a solid rhythmic guide when recording. Press [METRONOME] button can turn off or turn on the Metronome effect. When Metronome is turned on,press [METRONOME] button 2 seconds, use YES] / [/ Button to select Metronome volume (0-127) . CS Or press [SETUP] button to select Metronome type and volume, Please see page 17. 8. Tempo This function allows you to set the tempo by [TEMPO] button.
SETUP Press [SETUP] button to enter the function menu. Use [SETUP] button or button to select the function . Press button into the option, use / [/NO] button to set the parameter. The option and the parameters are as the follows: 1. Reverb Type Press [SETUP] button to enter the function menu. Use [SETUP] button or button to select Press button into the option,the LCD will display: R.TYPE: ROOM. oy Then use / button to set the parameter (Default: ROOM.
SETUP Sy Then use / [/NO] button to set the parameter (Default: CHORUS. The LCD will indicate these parameters as shown below: C.TYPE: CHORUS] C.TYPE: CHORUS C. TYPE: CHORUS C. TYPE: CHORUS C. TYPE: CELESTE] C. TYPE: CELESTE C.TYPE: CELESTE C.TYPE: CELESTE Press & buttons simultaneously to restore the default value. 3. Reverb Level Press [SETUP] button to enter the function menu. Use [SETUP] button or button to select Press button into the option, the LCD will display: R.LEVEL: 72.
SETUP 4, Chorus Level Press [SETUP] button to enter the function menu. Use [SETUP] button or button to select Press button into the option, the LCD will display: C.LEVEL: 64. GRAN RABID ope em LEVELHEADED Be SETUP Then use / button to adjust the CHORUS level. Range: 00-127 (Default: 64). 5. Main Volume Press [SETUP] button to enter the function menu. Use [SETUP] button or button to select [MAINSAIL. Press button into the option, the LCD will display: MAIN VOL: 127.
SETUP Then use / button to adjust the SPLIT VOL Range: 00-127. (Default: 127). Press & buttons simultaneously to restore the default value. 7. Layer Volume Press [SETUP] button to enter the function menu. Use [SETUP] button or button to select [WAYLAYER. Press ]button into the option,the LCD will display: LAYER VOL: 100. ON Then use / [/Button to adjust the LAYER VOL Range: 00-127. (Default: 100). Press & buttons simultaneously to restore the default value. 8.