50mm 100mm Spotlight Cam Wired Spotlight_Cam_Wired_2_MANUAL.
1. Set up your Spotlight Cam in the Ring app. Download the Ring app The Ring app will walk you through setting up and managing your Spotlight Cam. Search for “Ring” in one of the app stores below, or visit: ring.com/app. Download from Windows Store Grab your Wi-Fi password It’s required for the in-app setup. Write it down below so it’s handy when you need it: Your Wi-Fi password 2 Spotlight_Cam_Wired_2_MANUAL.
Plug your Spotlight Cam into a power outlet Set up your Spotlight Cam in the Ring app Plug your Spotlight Cam into an outlet in the same room as your Wi-Fi router to set it up. In the Ring app, select Set Up Device and follow the in-app instructions. Spotlight Cam Wired Spotlight Cam Battery 4 Spotlight_Cam_Wired_2_MANUAL.
Try it out! White light flashing? After setup, select the Live View button to see video from the camera in the Ring app. If the light on the bottom of your Spotlight Cam is flashing after setup, it’s updating its internal software. The light will stop flashing when the update is completed. This update can take up to a few minutes. 6 Spotlight_Cam_Wired_2_MANUAL.
Test video quality outside Now, unplug your Spotlight Cam and take it outside to where you want to install it. Plug Spotlight Cam into an outdoor outlet and test video quality again. 8 Spotlight_Cam_Wired_2_MANUAL.indd 8-9 2. Install your Spotlight Cam on the wall.
Before you begin This is everything you’ll need to install your Spotlight Cam. Screwdriver Use the screwdriver handle to hold the provided bit. Phillips Bit Use the Phillips bit for installing the mounting bracket and tightening the security screw. Install Screws (5) Use these to install the mounting bracket on your wall. Wall Anchors (16) Use these to attach the mounting bracket and the cable clips to your wall, if installing on a masonry surface, such as stucco or brick.
How it all fits together Install Screws Mounting Bracket Setup Button Security Screw Wire Clip Lights Motion Detector 12 Spotlight_Cam_Wired_2_MANUAL.
Select an install height When mounted at 9 feet off the ground, with the motion detector parallel to the ground, the motion sensor is optimized to detect humansized objects at up to 30 feet. Parallel to ground 9 feet (3 Meters) 30 feet (10 Meters) Spotlight_Cam_Wired_2_MANUAL.
Install the mounting bracket Use the built-in level to make sure your Spotlight Cam will be level before marking your holes. If installing on a masonry surface, first drill holes using the provided drill bit. Insert the wall anchors before installing the screws. If installing on a wood surface, use the install screws to screw the mounting bracket directly into your wall. 16 Spotlight_Cam_Wired_2_MANUAL.
Attach the base of Spotlight Cam to the mounting bracket Slot the base down to lock it to the mounting bracket. 18 Spotlight_Cam_Wired_2_MANUAL.
Tighten the security screw Using the Phillips end of the screwdriver bit, tighten the security screw on the right until your Spotlight Cam is secure. 20 Spotlight_Cam_Wired_2_MANUAL.
Secure the cable Use the provided cable clips to secure the cable on your wall. Use the included drill bit to predrill holes in the wall and insert the provided anchors first if installing on a masonry surface, like stucco or brick. The power cable can be painted to match the wall. 22 Spotlight_Cam_Wired_2_MANUAL.
Plug Spotlight Cam in If Spotlight Cam is not already plugged into a power outlet, plug it in now. If you’ve already completed the inapp setup, wait about a minute for Spotlight Cam to power up and come back online. 24 Spotlight_Cam_Wired_2_MANUAL.
Adjust the camera angle To ensure accurate motion detection, position the camera with the motion detector parallel to the ground. Tighten the side screw on the left to secure the camera position. 26 Spotlight_Cam_Wired_2_MANUAL.
For additional help, visit: ring.com/help Or give us a call… US 1 800 656 1918 UK 01727 263045 FR +80087009781 DE +80087009781 AU 1 300 205 983 NZ +64 9 887 9871 Mexico (D.F) 52 55 8526 5445 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. © 2019 Ring LLC or its affiliates. Ring and all related logos are trademarks of Ring LLC or its affiliates.
1523 26th St. Santa Monica, CA 90404 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Canada Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
