Beams Landscape Transformer Landscape_Transformer_Manual_Cert.
1. S et up your Ring Beams Landscape Transformer. Download the Ring app. The app walks you through setting up and managing your Landscape Transformer. Search for “Ring” in one of the app stores below, or visit: ring.com/app Download from Windows Store Choose a location. Ring Landscape Transformer Mounting Screw Template (FOR TESTING ONLY - DO NOT PRINT) Top Screws You’ll have to plug in your Transformer, so the best spot for it is near an exterior outlet.
2. Install lights and wiring. Choose a cable. Select a cable to wire your Transformer to your light fixtures using the chart below. Place light fixtures. Decide where you would like to place your lights, and arrange them in the desired locations. Connect to Transformer. Open the wiring cover to expose the terminals, and lock the door in place. Strip and split the cable. Feed one end into the Common terminal, and the other into the 12V or 15V terminal, based on the cable you chose. Close the wiring cover.
3. C onnect your Transformer to the Ring app. Plug the Transformer into the power outlet. Once plugged in, your Transformer and light fixtures will power on automatically and connect to the Ring app. Complete Setup in the Ring app. In the app, tap Set Up a Device. When prompted, select Beams and follow the in-app instructions to complete setup. Doorbells Security Cams Chimes Beams Congratulations! Your Landscape Transformer is ready to manage your lighting.
For additional help, visit: ring.com/help Or give us a call… US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. Patents: www.ring.com/patents © 2018 Ring LLC or its affiliates. RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates. Last updated: 10/11/18 Landscape_Transformer_Manual_Cert.
Warnings This device complies with part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. de moin de 20 cm. Installer les antennes de facon à ce que le personnel ne puisse approcher à 20 cm ou moins de la position centrale de l’ antenne. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.