Safety Instructions

ManualsBrandsRing ManualsElectronicsVideo Doorbell Pro 2

Important

Product

Information

SAFETY INFORMATION: FAILURE TO FOLLOW THESE

SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC

SHOCK, OR OTHER INJURY OR DAMAGE.

Your device can withstand outdoor use and has been tested

to withstand water projected through a 6.3mm nozzle at a

volume of 12.5 liters per minute and a pressure of 30 kPa at

a distance of 3 meters for at least 3 minutes. However, your

device is not intended for underwater use. To protect against

electric shock, do not intentionally submerge or immerse

your device, battery, or adapter (not included) in water or

expose your device or adapter to other liquids. Do not spill

any food or beverages on your device, battery, or adapter.

Do not attempt to clean or polish your device, battery, or

adapter with or expose your device, battery, or adapter to

oil, lotion, or other abrasive substances. Do not expose your

device, battery, or adapter to salt water or other conductive

liquids. Do not expose your device, battery, or adapter to

pressurized water, high velocity water, or extremely humid

conditions (such as a steam room). If your device, battery, or

adapter gets wet, carefully unplug all cables without getting

your hands wet and wait for it to dry completely before plug-

ging it in again. Do not attempt to dry your device, battery,

or adapter with an external heat source, such as a micro-

wave oven or a hair dryer. To avoid risk of electric shock, do

not touch your device, battery, or adapter or any wires con-

nected to your device during a lightning storm while your

device, battery, or adapter is plugged in. If your device, bat-

tery, or adapter appears to be damaged, discontinue use

immediately.

Users are required to use a power supply that complies with

PS2 or L.P.S. certiﬁcation and approval. Use only accessories

supplied with your device, or speciﬁcally marketed for use

with your device, to power your device. Use of third-party

accessories may impact your device’s performance. In lim-

ited circumstances, use of third-party accessories may void

your device’s limited warranty. In addition, use of incompati-

ble third party accessories may cause damage to your device

or the third-party accessory. Read all safety instructions for

any accessories before using with your device.

Protect the device from direct sunlight. Install the device at

dry locations and protect it against rain and humidity. The

device may not get contact to salt water or other conductive

liquids. The device must be charged only within a building

in a dry state.

SAFELY CONNECTING YOUR RING VIDEO DOORBELL

PRO 2 TO YOUR HOME’S ELECTRICAL WIRING

If you install the Ring Video Doorbell Pro 2 where a doorbell

is already in use and you connect the Ring Video Doorbell

Pro 2 to your home’s doorbell electrical wiring, you must turn

o the existing doorbell’s power source at your home’s cir-

cuit breaker or fuse and test that the power is o BEFORE

removing the existing doorbell, installing the Ring Video

Doorbell Pro 2, or touching electrical wires. Failure to turn

o circuit breaker or fuse so could result in FIRE, ELECTRIC

SHOCK, or OTHER INJURY or DAMAGE.

More than one disconnect switch may be required to turn

o the equipment before servicing.

To test whether you have successfully de-energized your

existing doorbell’s power source, press your doorbell sev-

eral times to conﬁrm that the power is o.

If the electrical wiring in your home does not resemble any

of the diagrams or instructions provided with Ring Video

Doorbell Pro 2, if you encounter damaged or unsafe wiring,

or if you are unsure or uncomfortable in performing this

installation or handling electrical wiring, please consult a

qualiﬁed electrician in your area.

Only use accessories & power sources with L.P.S. or PS2 cer-

tiﬁcation that are recommended by the manufacturer. Use

of third-party accessories may lead to damage to your Ring

Video Doorbell Pro 2 or the accessory and may cause ﬁre,

electric shock, or injury.

Product Speciﬁcations

Device Name: Video Doorbell Pro 2

Model Number: 5AT2S2

Electrical Rating: 16–24 VAC, 40VA max, 50/60Hz

Temperature Rating: -5°F to 120°F (-20°C to 50°C)

RECYCLING YOUR DEVICE PROPERLY

In some areas, the disposal of certain electronic devices

is regulated. Make sure you dispose of, or recycle, your

device in accordance with your local laws and regula-

tions. For information about recycling your device, go to

amazon.com/devicesupport.

By purchasing or using the product, you agree to the Terms

of Service found at ring.com/terms

For information on our warranty, theft protection, and Ring

Protect Plans, see ring.com/legal

Summary of content (2 pages)

PAGE 1
Important Product Information SAFETY INFORMATION: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE. Your device can withstand outdoor use and has been tested to withstand water projected through a 6.3mm nozzle at a volume of 12.5 liters per minute and a pressure of 30 kPa at a distance of 3 meters for at least 3 minutes. However, your device is not intended for underwater use.
PAGE 2
For Consumers in the USA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.