Full Product Manual

Contact Sensor

For additional help, visit:

ring.com/help

Quick Start Guide

In-app Setup

1. Make sure your Ring Alarm is disarmed.

2. In the Ring app, tap Set Up a Device and ﬁnd the

Contact Sensor in the Security Devices menu.

3. Follow the in-app instructions to complete setup.

Installation

1. Install the sensor and magnet on a door

or window and frame.

2. Clean the area before you peel the backing and

stick on the sensor and magnet.

3. Make sure there is no more than 1 inch (25.4 mm) between

the sensor and magnet when the door or window is closed.

If you’re using the Contact Sensor on a door you use often, choose

Main Door as the placement option. Main doors have Entry and Exit

Delays to prevent you from accidentally triggering the alarm.

PAGE 1
Contact Sensor Quick Start Guide In-app Setup 1. Make sure your Ring Alarm is disarmed. 2. In the Ring app, tap Set Up a Device and find the Contact Sensor in the Security Devices menu. 3. Follow the in-app instructions to complete setup. Installation 1. Install the sensor and magnet on a door or window and frame. 2. Clean the area before you peel the backing and stick on the sensor and magnet. 3. Make sure there is no more than 1 inch (25.
PAGE 2
Contact Sensor Spacing 1" max Ensure no more than 1 inch (25.4 mm) between sensor and magnet when the door or window is closed. 0.5" Leave at least a 1/2 inch (12.7 mm) space so you can open the battery compartment. Placement For Z-Wave technical information, visit ring.