Project / Subproject: SCS-001 USER GUIDE Rigado SCS-001 Reference Number / Version: 0.2 SCS-001 User Guide Version 0.2 4/21/2015 Issue Date: Document File Name: Page: 4/21/2015 SCS-001_User_Guide.
Project / Subproject: SCS-001 USER GUIDE Rigado SCS-001 Reference Number / Version: 0.2 Revision History Rev Author Comments 0.1 TRE Initial Revision 0.2 TRE Add application development information Issue Date: Document File Name: Page: 4/21/2015 SCS-001_User_Guide.
Project / Subproject: Rigado SCS-001 USER GUIDE SCS-001 Reference Number / Version: 0.2 TABLE OF CONTENTS 1 INTRODUCTION................................................................................................................................................................... 4 1.1 Intended Audience .............................................................................................................................................................4 1.2 FCC Statement ..
Project / Subproject: SCS-001 USER GUIDE Rigado SCS-001 Reference Number / Version: 0.2 1 Introduction This document describes user interaction and features with the SCS-001 prototype. 1.1 Intended Audience This intended audience of this document is any persons involved in use or testing of the SCS-001 prototypes. 1.2 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Project / Subproject: SCS-001 USER GUIDE Rigado SCS-001 Reference Number / Version: 0.2 2 2.1 Connecting using BLE Getting Rigado Toolbox Application The Rigado Toolbox application can be downloaded from the iTunes app store. 2.2 Connecting using Rigado Toolbox To connect to the SCS-001 using the RigadoToolbox application, first open the application. In the list of peripherals at the Home page you should see a device labelled RigCom (see figure 1). Select the RigCom device.
Project / Subproject: SCS-001 USER GUIDE Rigado SCS-001 Reference Number / Version: 0.2 3 Beacon BLE Characteristics The Beacon configuration service has six characteristics. For application development you will need the beacon configuration service UUID and the characteristic UUIDs for each of the individual characteristics (see table 1).
Project / Subproject: SCS-001 USER GUIDE Rigado SCS-001 Reference Number / Version: 0.2 The UUID characteristic can also be modified by other applications. Table 1 shows the UUID Characteristic UUID. Table 2 shows the miniumim/maxium values. Characteristic UUID Length Min Value Max Value b7717580-b82a-4502-bd90-7f703fb51324 16 Bytes 00000000-0000-00000000-000000000000 ffffffff-ffff-ffff-ffffffffffffffff Table 2: Beacon UUID Characteristic information 3.
Project / Subproject: SCS-001 USER GUIDE Rigado SCS-001 Reference Number / Version: 0.2 3.3 Minor Number Characteristic (b7717580-b82a-4502-bd90-7f703fb71324) The minor number is used to identify the beacon. The minor number characteristic can be used to modify the minor number. To modify the minor number select the minor number characteristic, select the minor number text box, and enter a new minor number (see Figure 4).
Project / Subproject: SCS-001 USER GUIDE Rigado SCS-001 Reference Number / Version: 0.2 3.4 Advertising Interval Characteristic (b7717580-b82a-4502-bd90-7f703fb81324) The advertising interval characteristic is used to modify the timing of the beacon in milliseconds. To change the advertising interval select the Advertising Interval characteristic, press the interval text box, and enter a new advertising interval (see Figure 5). The maximum advertising interval is 4000ms (4 seconds).
Project / Subproject: SCS-001 USER GUIDE Rigado SCS-001 Reference Number / Version: 0.2 3.5 TX Power Characteristic (b7717580-b82a-4502-bd90-7f703fb91324) The Beacon TX power can be used to change the broadcasting. To change the TX power select the TX power characteristic and select a TX power from the Select TX Power Level page (see Figure 6). For SCS-001 the TX power selection is limited to -4 dBm and below because the amplifier adds +24dB of gain.
Project / Subproject: SCS-001 USER GUIDE Rigado SCS-001 Reference Number / Version: 0.2 3.6 Enable Characteristic (b7717580-b82a-4502-bd90-7f703fba1324) The enable characteristic is used to enable the beacon service to advertise. To enable or disable to the beacon select use the slide button. Once enabled, the beacon will start advertising after you exit the BMDware Configuration page.
