User's Manual

ManualsBrandsRigado ManualsElectronicsBMD-330

Table Of Contents

BMD-330-DS V0.9 Page 1 of 24

BMD-330 Module for Bluetooth 5 LE

The BMD-330 from Rigado is a powerful, highly flexible, ultra-low power Bluetooth Smart

module based on the nRF52810 SoC from Nordic Semiconductor. With an ARM®

Cortex™ M4 CPU, embedded 2.4GHz transceiver, and integrated antenna, it provides a

complete RF solution with no additional RF design, allowing faster time to market.

Providing full use of the nRF52810’s capabilities and peripherals, the BMD-330 can

power demanding applications, while simplifying designs and reducing BOM costs. With

an internal DC-DC converter and intelligent power control, the BMD-330 provides class-

leading power efficiency, enabling ultra-low power sensitive applications. Regulatory

pre-approvals reduce the burden to enter the market. As a drop in replacement for the

BMD-300/301, the BMD-330 completes Rigado’s BMD-300 Series lineup with an

optimized peripheral set that is attractive for a wide range of cost-sensitive applications.

1. Features

• Based on the Nordic nRF52810 SoC

• Complete RF solution with integrated antenna

• Integrated DC-DC converter

• No external components required

• ARM® Cortex™-M4 32-bit processor

• Serial Wire Debug (SWD)

• Nordic SoftDevice ready

• Over-the-Air (OTA) firmware updates

• 192kB embedded flash memory

• 24kB RAM

• 32 General Purpose I/O Pins

• 12-bit/200KSPS ADC

• -40C to +85C Temperature Range

• FCC: 2AA9B09 (Pending)

• SPI Master/Slave (8 Mbps)

• General purpose comparator

• Temperature sensor

• Random Number Generator

• 2-wire serial Master/Slave (I2C compatible)

• UART (w/ CTS/RTS and DMA)

• 20 channel CPU independent Programmable

Peripheral Interconnect (PPI)

• Quadrature Demodulator (QDEC)

• 128-bit AES HW encryption

• 3 x 32bit, 2 x 24bit Real Timer Counters (RTC)

• Dimensions: 14 x 9.8 x 1.9mm

• IC: 12208A-09 (Pending)

2. Applications

• Climate Control

• Lighting Products

• Safety and Security

• Home Appliances

• Access Control

• Internet of Things (IoT)

• Home Health care

• Advanced Remote Controls

• Smart Energy Management

• Low-Power Sensors

• Beacons– iBeacon™,

AltBeacon, Eddystone, etc.

• Environmental Monitoring

• Hotel Automation

• Office Automation

• Wearables

Industry Canada

User Manual

Product Name: BMD-330

Brand: RIGADO

Model:BMD-330

Manufacture: Rigado, Inc.

Summary of content (26 pages)

PAGE 1
User Manual Product Name: BMD-330 Brand: RIGADO Model:BMD-330 Manufacture: Rigado, Inc. BMD-330 Module for Bluetooth 5 LE The BMD-330 from Rigado is a powerful, highly flexible, ultra-low power Bluetooth Smart module based on the nRF52810 SoC from Nordic Semiconductor. With an ARM® Cortex™ M4 CPU, embedded 2.4GHz transceiver, and integrated antenna, it provides a complete RF solution with no additional RF design, allowing faster time to market.
PAGE 2
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 3. Ordering Information Email modules@rigado.com for quotes and ordering or visit http://www.rigado.com/BMD-330 Part Number BMD-330-A-R BMD-330-EVAL Description BMD-330 module, Rev A, Tape & Reel, 1000 piece multiples BMD-330 Evaluation Kit with Segger J-Link programmer Table 1 – Ordering Part Numbers 4.
PAGE 3
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 Table of Contents 1. FEATURES...............................................................................................................................................................................1 2. APPLICATIONS ........................................................................................................................................................................1 3. ORDERING INFORMATION........................................
PAGE 4
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 5. Quick Specifications Bluetooth Version 5.
PAGE 5
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 6. Pin Descriptions Figure 2 – BMD-330 Pin out (Top View) Pin 6 7 8 9 10 11 12 13 14 15 19 20 21 22 23 24 25 26 27 28 31 BMD-330-DS V0.9 Name P0.25 P0.26 P0.27 P0.28 P0.29 P0.30 P0.31 P0.00 P0.01 P0.02 P0.03 P0.04 P0.05 P0.06 P0.07 P0.08 P0.09 P0.10 P0.11 P0.12 P0.
PAGE 6
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 Pin 32 33 34 35 36 37 38 39 40 41 42 43 44 17 1, 2, 3, 4, 5, 16, 18, 29, 30, 45, 46, 47 Name P0.14 P0.15 P0.16 P0.17 P0.18 P0.19 P0.20 P0.21 P0.22 P0.23 P0.24 SWCLK SWDIO VCC Direction In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In/Out In In/Out Power Description GPIO GPIO GPIO GPIO GPIO GPIO GPIO ̅̅̅̅̅̅̅̅ GPIO/RESET GND Power Electrical Ground GPIO2 GPIO2 GPIO2 SWD Clock SWD IO +1.7V to +3.6V1 Note 1: An internal 4.
PAGE 7
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 7. Electrical Specifications 7.1 Absolute Maximum Ratings Symbol Parameter Min. Max. Unit VCC_MAX Voltage on supply pin -0.3 3.9 V VIO_MAX Voltage on GPIO pins (VCC > 3.6V) -0.3 3.9 V VIO_MAX Voltage on GPIO pins (VCC ≤ 3.6V) -0.3 VCC + 0.3V V Storage Temperature Range -40 125 °C TS Table 4 – Absolute Maximum Ratings 7.2 Operating Conditions Symbol VCC TR_VCC TA Parameter Operating supply voltage Supply rise time (0V to 1.
PAGE 8
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 7.4 Module RESET GPIO pin P0.21 may be used for a hardware reset. In order to utilize P0.21 as a hardware reset, the UICR registers PSELRESET[0] and PSELRESET[1] must be set alike, to the value of 0x7FFFFF15. When P0.21 is programmed as ̅̅̅̅̅̅̅̅, the internal pull-up is automatically enabled. Rigado and Nordic example applications and development RESET ̅̅̅̅̅̅̅̅. kits program P0.21 as RESET 7.
PAGE 9
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 Symbol Parameter Min. Typ. Max. Unit f TOL_LFRC Frequency Tolerance, 32.768kHz RC Oscillator - - ±2 % fTOL_CAL_LFRC Frequency tolerance, 32.768kHz RC after calibration Frequency Tolerance, 32.768kHz Synthesized Oscillator - - ±250 ppm - - ±48 ppm fTOL_LFSYNT Note 1: fTOL_LFXO_BLE and fTOL_LFXO_ANT are the max allowed for BLE and ANT applications. Actual tolerance depends on the crystal used. Table 8 – 32.768 kHz Oscillator 8.
PAGE 10
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 8.3 MAC Address Info The BMD-330 module comes preprogrammed with a unique MAC address from the factory. The MAC address is also printed on a 2D barcode on the top of the module. Figure 3 – BMD-300/301 MAC Address on Label The 6-byte BLE Radio MAC address is stored in the nRF52810 UICR at NRF_UICR_BASE+0x80 LSB first. From the factory, the MAC address can be read over SWD since read-back protection is not enabled.
PAGE 11
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 9. Mechanical Data 9.1 Mechanical Dimensions Figure 4 – BMD-330 Module Dimensions (All dimensions are in mm) BMD-330-DS V0.
PAGE 12
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 9.2 Recommended PCB Land Pads The BMD-330, BMD-300, and BMD-301 have identical PCB layout footprints. Figure 5 – BMD-300/301 Dimensions (Top View) (All dimensions are in mm) 10. Module Marking Figure 6 – BMD-330 Module Marking – Rev A BMD-330-DS V0.
PAGE 13
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 11. RF Design Notes 11.1 Recommended RF Layout & Ground Plane 11.1.1 BMD-300 For the BMD-330, the integrated antenna requires a suitable ground plane to radiate effectively. The area under and extending out from the antenna portion of the module should be kept clear of copper and other metal. The module should be placed at the edge of the PCB with the antenna edge facing out.
PAGE 14
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 11.3 Antenna Patterns Antenna patterns are based on the BMD-300 Evaluation Kit vA with a ground plane size of 82mm x 56mm. The BMD-300 module was replaced with a BMD-330 module. X-Y-Z orientation is shown in Figure 8: Figure 8 – X-Y-Z Antenna Orientation 11.3.1.1 X-Y Plane X Y Figure 9 – X-Y Plane Antenna Pattern BMD-330-DS V0.
PAGE 15
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 11.3.1.2 Y-Z Plane Y Z Figure 10 – Y-Z Plane Antenna Pattern 11.3.1.3 Z-X Plane Z X Figure 11 – Z-X Plane Antenna Pattern BMD-330-DS V0.
PAGE 16
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 12. Evaluation Boards Rigado has developed full featured evaluation boards for the BMD-300 which can be used for BMD-330 development. The BMD-300 evaluation board provides a complete I/O pin out to headers, on-board programming and debug, 32.768 kHz crystal, power & virtual COM port over USB, 4 user LEDs, and 4 user buttons.
PAGE 17
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 14. Bluetooth Qualification The BMD-330 Series modules are qualified as a Bluetooth Component (tested) for RF-PHY (Pending). This allows customers to use different SoftDevices that have been qualified by Nordic without the need to complete additional RF-PHY testing. To achieve Bluetooth End Product qualification, the Rigado RF-PHY QDID can be combined with Nordic QDIDs for the SoftDevice used when filing on the Bluetooth SIG website.
PAGE 18
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 (2) Co-location Warning: This device and its antenna(s) must not be co-located or operating in conjunction with any other transmitter antenna. (3) OEM integration instructions： This device is intended only for OEM integrators under the following conditions: The antenna and transmitter must not be co-located with any other transmitter or antenna.
PAGE 19
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 15.3 IC Statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
PAGE 20
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 15.5 CE Regulatory The BMD-330 module is being tested and is expected to be compliant against the following standards. OEM integrators should consult with qualified test house to verify all regulatory requirements have been met for their complete device. From Directive 2006/95/EC: • EN 60950-1: 2006 + A11: 2009 + A1: 2010 + A12: 2011 From R&TTE Directive 1999/5/EC: • ETSI EN 300 328 V 2.1.1 From Directive 2004/108/EC: • ETSI EN 301 489-1 V2.1.
PAGE 21
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 16. Solder Reflow Temperature-Time Profile Figure 12 – Reflow Profile for Lead Free Solder 16.1 Moisture Sensitivity Level The BMD-330 is rated for MSL 3, 168-hour floor life after opening. 17. Packaging and Labeling 17.1 Carrier Tape Dimensions Figure 13 – BMD-330 Carrier Tape Dimensions BMD-330-DS V0.
PAGE 22
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 17.2 Reel Packaging Modules come on 330mm reels loaded with 1000 modules. Each reel is placed in an antistatic bag with a desiccant pack and humidity card and placed in a 340x350x65mm box. On the outside of the bag an antistatic warning and reel label are adhered. Figure 14 – Reel Cartons 17.3 Packaging Label Part No.: BMD-330-A-R Figure 15 – Packaging Label BMD-330-DS V0.
PAGE 23
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 18. Cautions 1) The guidelines of this document should be followed in order to assure proper performance of the module. 2) This product is for use in office, business, and residential applications, but not medical devices. 3) This module may short-circuit. If a short circuit can result in serious damage or injury then failsafe precautions should be used. This could be accomplished by redundant systems and protection circuits.
PAGE 24
BMD-330 Module Datasheet Bluetooth 5 September 13, 2017 20. Document History Revision Date Changes / Notes 0.9 09/13/2017 Preliminary release 21. Related Documents Rigado Documents: • BMD-300-Series-EVAL-UG: Evaluation Kit User Guide • BMD-300 Series Data Sheet Nordic Documents: Visit infocenter.nordicsemi.com for a comprehensive library of Nordic technical documentation. • nRF52810 – nRF52810 Product Specification • S132-SDS – nRF52832 S132 Soft Device Specification BMD-330-DS V0.
PAGE 25
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 26
IC statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada .