GMS MANUAL
Before Before Setting Setting What WhatisisGMS? GMS? GMS is an integrated security management system that provides a useful solution for central monitoring station operation. Minimum MinimumSystem SystemSpecifications Specifications ►CPU : P-4 or higher than Celeron 1.5GHz ►MEMORY : 256MB or more ►VGA CARD : AGP 64MB or more ►HDD : Over 100 MB available space ►O/S : Windows 2000 or Windows XP Professional ►DirectX : V9.
Contents Contents After purchasing the GMS program, make sure that the following contents are included.
Table Table of of Contents Contents 1. GMS Application Installation………..……………………………………………………………………….6 2. GMS Application Execution….………………………………………………………………………………9 3. GMS Live View.………………………………………………………………………………………………………10 3.1 Initial screen…..…………………………………………………………………………………………10 3.2 Remote DVR server connection ……….………….……………………………………………………………12 3.3 Login-in & Log-out……………………………………………………………………………………………17 3.4 Server list tree………………………………………………………………………………………………18 3.
6.3 Recording………………………………………………………………………………………………………69 6.3.1 Recording…………………………………………………………………………………69 6.3.2 Schedule…………………………………………………………………………………70 6.4 E vent ……………………………………………………………………………………………………74 6. 4. 1 Motion Detect ion ………………………………………………………………………………74 6.4.2 Emergency ………………..…………………………………………………………………77 6.4.3 Video Loss……………………………………………………………………………………78 6. 4 . 4 E-ma i l N oti ce… … …… … ………………………………………………………………………79 6.5 Backup………………………………………………………………………………………………………… 81 6.
1. GMS Application Installation 1 Insert the GMS CD and double click on “setup.exe” to run the setup program. 2 Click on the [Next] button.
3 Check the box “I accept this License Agreement” and click on [Next]. 4 Enter the path to install the GMS program and click on the [Next] button. 5 This will start the installation process.
6 After the GMS Program is completely installed, click on the [Finish] button. 7 “GMS Live View” will appear on the desktop.
2. GMS Application Execution 1 Double click on the “GMS Live View” icon to run the GMS Program.
3. GMS Live View 3.1 Initial screen GMS Live View offers functions such as real time DVR remote viewing and control. The system user interface is illustrated below. Each element is described in the following: 1 5 6 2 7 4 3 8 9 1 Title bar : Displays the program name. 2 View panel : Live and recorded pictures are display here. 3 Display panel : Multi screen splits, sequence and Full screen display. 4 Tool bar : Live Mode, Refresh, 2Way Audio, Alarm in Full screen.
7 Server list : Shows resource information on the camera, alarm-in and alarm-out for each server. 8 Timeline panel : Displays the recording time of the selected channel. The recorded time is shown in the graph (24-hour clock). 9 Play tab/PTZ tab : The play tab features the normal/reverse play buttons. The PTZ tab features the PTZ camera control buttons.
3.2 Remote DVR server connection GMS Live View allows you to connect and manage all the DVR servers in the network. Add AddDVR DVRserver servergroup group 1.When you add or connect the remote DVR server, click on the then be displayed as shown below. button. It will 2. Click on the “Connection” button to open Server Connect. 3. Enter the group name. 4. Click on the “Add” button to add the group to the server list.
Add AddDVR DVRremote remoteserver server 1. Select the group to be registered. 2. Enter the server connect information. d e a b c a Remote DVR server list : Displays the registered group and server list . b Import : Imports server connect information from the other DVR. c Export : Exports server connect information to another DVR or the outside DVR. d Group : Displays the group name or can be changed to another group.
p f g h i j m j k n o p f Server Type : Select the server type according to the DVR type. g Network Type : Select the network type. h Address : Enter the IP address or domain name of the DVR server to connect. i Port : Enter the network port number to communicate with the GMS and DVR servers. j Upgrade Port : Input the network port number by which to upgrade DVR software. k ID : Enter the administrator ID of the DVR server. l Password : Enter the password of the DVR server.
Connect Connectremote remoteDVR DVRserver server 1. Click on the and “Connection” buttons to display the server connect windows. 2. Select the server in the DVR server list. 3. Click on the “Connect” button to connect. The connected server is shown in the server list.
Disconnect Disconnectremote remoteDVR DVRserver server 1. Click on the and “Disconnection” buttons to display the disconnect windows. 2. Select the DVR server you wish to disconnect. 3. Click on the “Disconnect” button to disconnect the DVR server. 4. Click on the “Close” button to close the windows. Exit GMS Exit GMS 1. Click on the and “Exit” buttons to exit to Windows.
3.3 Log-in & Log-out To use DVR server which is connected to Server List, User should get a use permission by entering ID and Password. Resource information without login is protected. Log-In Log-In 1. After choosing DVR Server which user want to log in on Server list, Push right button on mouse. 2. Click “Login” button when popup is displayed. 3. Enter Password and ID when following log in message is displayed. Log-Out Log-Out 1.
3.4 Server list tree The server list tree displays the status of the cameras, alarm-in and alarm-out devices in the form of a tree structure.
3.5 Display live screen To watch live pictures, you can set up the cameras on each connected DVR and watch on one or more DVR servers. Display Displaythe thelive livepicture pictureon onscreen screen 1. To display resource information in the DVR server list, click on ‘+’ to expand the resource information. 2. If you drag the camera and move to another DVR server in the DVR server list, the camera picture will be shown at another site. 3. Repeat 3 times to set up cameras from one or more DVR servers.
Remove Removelive livepicture picturefrom fromscreen screen 1. Select the camera picture you wish to remove. 2. Drag it to the DVR server list. 3. The ‘GANZ’ logo screen will be displayed in place of the removed DVR server. This indicates a vacant area.
3.6 Screen division GMS Live View makes it possible to watch several camera pictures from multiple DVR at the same time. The display setup can be selected in multiple screen configurations using the screen division button. Select Selectscreen screendivision division 1. To divide the view panel, click on the button. It will be displayed as follows. 2. Click on the button corresponding to the desired screen division to change the display.
3.7 Full-screen enlargement Enlarge Enlargetotofull fullscreen screenon onthe themonitor monitor 1. Click on the the monitor. button to enlarge the picture to full screen without a frame on 2. Only video can be displayed in full screen. 3. Click on the left mouse button to exit the full screen display.
3.8 2 Way Audio 2 Way Audio allows communication between GMS and DVR sites. When 2 Way Audio is activated, simultaneously you can listen to the signal from the DVR though a speaker and communicate with a microphone. 22Way WayAudio AudioSetup Setup 1. In Live View select the image of camera you want to access. 2. Select the two way audio button and then the software will try to connect GMS and DVR. Once the connection is made the window appear as below.
3.9 Timeline panel The recorded volume of the selected channel is shown here by means of a 24-hour timeline. The color of the graph indicates the type of recording. The recording types are as follows: continuous recording, motion detection recording, alarm recording, pre-alarm recording and ATM/POS recording. Timeline Timeline b c d e a f g h a Live mode : Returns any camera in 1 channel playback mode back to live mode..
You can use the calendar to go to any specific date. If you select the date on which you wish to search, it will be displayed in a different color. Recording information is shown automatically in the timeline. Select Selectdate datefor forsearch search 1. Click on the button to display the calendar. 2. Select the date on the calendar. 3. Enter the time you wish to view.
You can enlarge the size of the timeline. Whenever you click the time display section, it will be enlarged to display smaller time intervals for precise time settings. Enlarge Enlargetimeline timeline 1. Click on the left mouse button to enlarge the timeline display. 2. The timeline is enlarged each time you click on it. Reduce Reducetimeline timeline 1. Click on the right mouse button to reduce the timeline display. 2. The timeline is reduced each time you click on it.
3.10 Playback control Playback Playbackcontrol control Use the Playback controls to move between recordings in forward and reverse play. Also select the playback in frame by frame and first / last image of the day. The speed control function allows for effective monitoring. Normal Slow Fast Max.
3.11 1 Channel playback GMS Live View allows for live picture viewing and searching through 1 channel recordings. 11Channel Channelplayback playback 1. Select the picture that you wish to search and click on it with the mouse. 2. The time graph for the selected channel is displayed. 3. Click on “Camera 1”. 4. Select the time and date . 5. If you click on the button, the recorded file will be played in the view panel. 6. To switch to live viewing mode, click on the button.
3.12 PTZ control PTZ PTZcamera cameracontrol control 1. Select a picture provided by PTZ. 2. Select the PTZ tab. 5 1 2 3 4 1 Focus : Adjust the lens focus in the PTZ camera. Auto focus cannot be adjusted. 2 Zoom : Adjust ZOOM IN/ ZOOM OUT on the PTZ camera. 3 Speed : Adjust the speed of the PTZ camera and the speed of focus. 4 Control : Set up the focus/zoom/speed. 5 PTZ Direction Control : Move the PTZ camera up/down/left/right.
3.13 Backup How Howtotobackup backup 1. Select the channel to backup on screen. 2. Click on the button to display the following options. 3. Click on the “Backup” button to open the backup dialogue window.
4. Enter detailed information for the backup. 1 5 2 6 3 7 4 1 Backup format : Select the recording format for the backup. • Time backup This function is used to backup video data in GANZ video format, GANZ viewer software is required for playback. • AVI backup This is used to backup video data in one of the standard MS Windows Media Player formats. • SFX backup (Self Extract file) This is used to backup video data with the player included for playback.
The booked list with the registered backup time, cycle and backup media is displayed. The backups are created according to the backup schedule. Manage Managebackup backupschedule schedulelist list 1. Click on the button to run the backup schedule management dialogue. 2. Click on the “Management” button to display the backup schedule management dialogue. 1 2 4 5 3 6 7 1 Backup schedule list : Displays the backup schedule list. 2 Information : Displays all backup schedule information.
7 Safety Remove Hardware : Click “Safety Remove Hardware” button to remove UBS device which is connected with the system. If the window below displays, click the device to remove in the list and then click “Remove” button.
4. GMS Search 4.1 Playback recorded data GMS Search allows you to watch recorded DVR data in the network via remote control. GMS Search has a user interface as shown below. Each element is described in detail in the following: 1 7 8 2 9 10 12 11 13 3 4 5 6 1 Title bar : Displays the name of the program playing. 2 View panel : Plays the recorded picture. 3 Spilt button : Split view panel. 4 Printer button : Opens the print page from which the user can select print options to then print screen.
4.2 Allocate the remote DVR server on screen Allocate the DVR server in the network to the view panel to search the DVR server’s picture.. Drag Dragand anddrop droptotoscreen screen 1. Select the DVR server in the DVR server list. 2. Drag and drop the DVR server to the view panel. 3. The recording information of the DVR server will be adapted in GMS Search. 4. Repeat these steps to search another DVR server.
4.3 Timeline panel on playback The timeline shows the recorded data and times over a 24-hour time period in the form of a graph. The color of the graph indicates the type of recording. The recording types are as follows: Continuous recording, motion recording, pre-alarm recording and ATM/POS recording. Timeline Timeline a b c d i e f g a Refresh : Refresh timeline with latest recorded times. b Date selection : Select the year, month and day. c Time selection : Set the time.
You can move recorded dates using the calendar. Select any date to move it. If data exists for this date, the color of the date will be changed. Recording information will be displayed automatically. Date Dateselection selectioninintimeline timeline 1. Click to select the searching date. 2. Select the date in the calendar. 2. Enter the time you wish to search.
4.4 Playback control Playback Playbackcontrol control Use the Playback controls to move between recordings in forward and reverse play. Also select the playback in frame by frame and first / last image of the day. The speed control function allows for effective monitoring. Normal Slow Fast Max.
4.5 Playback screen division Select Selectscreen screendivision division 1. To divide the view panel, click on the button. It will be displayed as follows. 2. Click on the button corresponding to the desired screen division to change the display. Quad 6-way 9-way 10-way 13-way 16-way 25-way 33-way 36-way ☞ [Note] • If there are not enough cameras connected for a multiple screen division then those screens will be blank.
4.6 Printing Printing Printing 1. Select the searching picture you wish to print. 2. Click to print. 3.Click “OK” to start printing.
☞ [Note] Print setup 1. Select Start Æ SetupÆ Printer in Windows. 2. Double-click on [Add a printer ] in the Print menu. 3. Click [Next] in the Add printer wizard. 4. Check to see which [Local printer] is available, select, then click [Next]. 5. Click [Disk included] or select printer driver. 6. After the driver has been installed, the print setup is completed. Image printing 1. When printing, select the monitor size. If printing is not successful 1. Check the printer setup in Windows. 2.
4.7 Bookmark Add Addbookmark bookmark 1. Click on the “Bookmark” button. c a e b d f a Add : Add the currently displayed frame to the bookmark list. b Go to : Jump to the selected bookmark. c Edit : Edit the name or time of the selected bookmark. d Del : Deletes the selected bookmark. e Del All : Deletes all bookmarks. f Bookmark list : Shows all bookmark list. 2. Select the bookmark time. 3. Click on the “Add” button. 4. Enter the name of the bookmark. 5.
Delete Deletebookmark bookmark 1. Select the item you wish to delete. 2.. Click on the “Del” button to delete the bookmark. Delete Deleteall allbookmarks bookmarks 1. Click on the “Del All” button to delete all of the bookmarks. 2. Click on the “Yes” button to complete the deletion. Revise Revisebookmarks bookmarks 1. Select the item you wish to revise. 2. Click on the “Edit” button. 3. Revise the bookmark information. 4.Click on the “OK” button to view your changes.
Go Gototobookmark bookmark 1. Select the item you wish to access. 2. Click on the “Goto” button. 3. It will move to the specified bookmark time.
4.8 Picture adjustment Adjustment Adjustment 1. Click on the “Adjustment” button to improve the image. a b c d e f h g a Brightness : Adjust the brightness of the displayed image. b Contrast : Adjust the contrast of the displayed image. c Sharpness : Adjust the sharpness of the displayed image. d Restore : Restore the displayed frame’s original parameters. e Screen Zoom : Enlarge or reduce the displayed image. f Zoom In : Enlarge the displayed image. g Zoom Out : Reduce the displayed image.
3. Adjust the Brightness/Contrast/Sharpness button. 4. Click on the button to go to initial setup. Zoom Zoomin/zoom in/zoomout out 1. Select the channel on which you want to zoom in/zoom out. 2. Click on the button to zoom in/zoom out.
Zoom Zoominin 1. Enter search mode and select the adjustment tab. 2. Select the channel you wish to enlarge in search mode . 3. Click on the button, then the mouse pointer will change to the icon. 4. Move the mouse pointer to the area within in the image you wish to enlarge . 5. If you left-click the mouse button, it will enlarge designated area. 6. Click on the button to return to the normal mouse cursor. Zoom Zoomout out 1. Once you have zoomed in on an image, you can zoom out again. 2.
Movement Movement 1. Zoom out on an image. 2. Click on the button. The mouse pointer will then change to the symbol. 3. Select the area you wish to move and drag it. 4. If you want to cancel it, click on the button. ☞ [Note] Zoom in/out by Keyboard and Mouse • Push Ctl key and Click left button on mouse, then Zoom-in is executed. • Push Ctl+Shift key and Click left button on mouse, then Zoom-out is executed. • Push up Mouse Wheel button, then Zoom-in is executed. Push down, then Zoom-out is executed.
4.9 Calendar This displays a calendar where you can specify the date of your choice. If recorded volumes exist for this date, the color of the date will be different. Recording information will be displayed in the timeline. Select Selectdate date 1. Click on the “Calendar” button to search for the date. a c b d e e a Previous year : Move to previous year. b Next year : Move to next year. c Previous month : Move to previous month. d Next month : Move to next month. e Date : Move to selected date.
4.10 Event Events which have occurred in the DVR system are displayed. All events triggered due to motion detection or alarms are listed in the event list. Double-click on the event to the display the picture you wish to search. Event Event 1. Click on the “Event” button to search the event. Event display 2. Double-click on the event you wish to search. 3. The picture of the selected event is displayed.
4.11 Playback backup data Playback Playbackbackup backupdata data 1. Click button to open backup menu. 2. Click “Search” button. 3. Find the location of backup then click the “Select” button to open backup data folder. (DVR HDD Backup path : ‘LocalServer_IP127.0.0.1’ folder -> ‘NDB’ folder’ -> Select backup folder (See below)) 4. Selected backup will then be displayed in the Server list. 5. The backup time range will be displayed in the search timeline.
5. GMS E-Map 5.1 Display E-Map E-map is a computer map of the area with designated locations of installed cameras, alarm-in(s) and alarm-out(s). E-map has a user interface as illustrated below. Each box is described in detail in the following. 1 4 2 8 9 3 10 5 6 7 1 Title bar : Specifies the name of the running program. 2 E-map editing panel : Register, edit or delete E-map. It can delete all cameras, alarm-in and alarm-out controls in the E-map.
5.2 Add E-map Add AddE-map E-map 1. Click on the “New” button to add an E-Map. 2. Enter the map name and map path. 3 . Click on the “OK” button. The registered display will be shown.
5.3 Edit E-map Edit EditE-map E-map 1. Click on the “Edit” button to add an E-map image. 2. Enter the map name and map path. 3 . Click on the “OK” button. The edited display will then be shown.
5.4 Delete E-map Delete DeleteE-map E-map 1. Click on the “Delete” button to delete the E-map. 2. A message will be displayed, e.g. “Do you really want to delete?”. 3. Click on the “Yes” button to delete the E-map.
5.5 Device control registration to E-Map Device Devicecontrol controlregistration registration 1. Expand the resource information to see the resource information of the connected DVR server in the DVR server list. 2.Drag and drop the cameras, alarm-ins and alarm-outs in the DVR server list to the required locations.
5.6 Remove device control from E-Map Remove Removedevice devicecontrol control 1. Select the control you wish to remove. 2. Drag the camera picture to the DVR server list 3. The removed camera is marked as a vacancy.
5.7 Remove all device controls from E-Map Remove Removeall alldevice devicecontrols controls 1. Click on the “Reset” button to remove all device controls. 2. A box will be shown as below. 3. Click on the “Yes” button. Then all device controls will be removed.
5.8 Live screen output Display Displaylive livescreen screen 1. Double-click on the control in E-map. 2. The live screen in which you wish to search will be output.
6. Configuration 6.1 Basic Menu Parts Menu Menuconfiguration configurationbuttons buttons • By pressing buttons, you can select between each menu. • The main categories : Camera, Recording, Event, Backup, Network, System. Saving/Cancelling Saving/Cancellingofofchanged changedInformation Information • OK : Closes the window and saves any changed information. • Cancel : Closes the windows and does not save changed information. • Apply : Saves information but does not close the window.
6. Configuration 6.2 Hardware The hardware setup allows users to modify external device configurations, such as cameras, alarms and monitors. 6.2.1 Camera You can set up each camera configuration individually using the options available below. 2 3 4 5 1 6 1 Camera : Select channel to set up camera. 2 Camera display : It shows the picture of the selected camera. When you make adjustments to the camera settings, you can see the changes in the picture.
Camera Cameraattributes attributes 1 2 3 4 5 5 1 Name : Enter the name of location where the camera is installed. 2 Camera : Choose to enable or disable the camera. 3 PTZ : Choose to enable or disable the PTZ. 4 Setting : Select the PTZ setup configuration. 5 Covert : Choose to enable or disable the covert camera. Covert camera is the function that will disable the display in live mode.
The DVR system can connect with any PTZ, speed dome or Rx receiver and control the devices remotely via our software. To use this function, connect the device to the RS485 port on the DVR and set up the address and settings of the remote device. PTZ PTZsetup setup 1. Select the camera number for which you wish to set up PTZ control. 2. Click on the button to select “use” PTZ. 3. If you choose “use”, the “Setting” button will be activated. 4. Click on the “Setting” button.
5. Input the PTZ model (protocol), speed (baud rate), address and port settings. 6. Click on the “OK” button once setup is complete. 1 2 3 4 5 6 7 8 9 1 Model : Select the PTZ protocol of the installed PTZ. 2 Speed : Select the PTZ speed(2400~115200 Bps). 3 Address : Enter the PTZ adress(0~255). 4 Port : Select the port number connected to the PTZ. 5 Mode : Select the port mode connected to the PTZ. 6 Parity : Set bit (None, Odd, Even, Space) to prevent fatal error.
In camera watch part, when user wish to hide some special part because of privacy matter, User can set up Privacy zone. Masking Masking(privacy) (privacy)zone zonesetup setup 1. Select a camera number for Privacy Zone you wish to set up. 2. Select “Use” in the Masking Zone menu. 3. Click “Setting” button, then Grid pattern will be displayed on camera Display. 4. Select a part wished to hide by mouse on camera. Assigning of Privacy Zone : Click left button on mouse and Drag.
6.2.2 Audio The audio setup allows users to modify live audio output and recordings on the watch screen. 2 4 3 5 6 1 7 1 Camera : Select the channel to set up the camera. 2 Audio Input : Select the audio channel to link with the selected channel. 3 Live : Set up live audio output on the watch screen 4 Recording : Set up audio recording. 5 Name : Enter audio channel name. 6 Sampling : Select audio quality to record audio. 7 Audio Link Info : Displays each channel audio property.
6.2.3 Alarm Alarms are used to activate and deactivate sirens and lights when certain events occur, e.g. when motion is detected or a sensor triggered. Configure the DVR using the explanations below. 2 4 5 1 3 6 7 8 9 10 11 1 Channel : Select the alarm-in number for configuration. 2 Name : Input name for the selected alarm-in . 3 Pre rec time : Set the pre-recording time for the period between when the event was detected in the alarm-in and when the DVR starts recording.
6.2.4 External monitor Setup for external monitor output to change the displayed images on the spot monitors. 1 2 3 4 1 Camera select : Select camera for output on spot monitor 1. 2 Cycle period : Set up sequence dwell time period by dragging the slider. 3 Camera select : Select camera for output on spot monitor 2. 4 Cycle period : Set up sequence dwell time period by dragging the slider.
6.3 Recording 6.3.1 Recording Recording contains the settings for each channel. You can set the frame rate, emergency frame rate, quality and resolution by weekdays, Saturdays and holidays. 1 4 2 5 6 3 7 button. You can make a schedule using 1 Schedule type : To see schedule type, click on the different recording options (recording fps, quality, resolution, emergency fps. You can also click on the “Color” button to assign each schedule a color to distinguish between schedule types.
6.3.2 Schedule Establish the recording schedule using the various recording modes and set for weekdays, Saturdays and holidays. The display includes a calendar for selection by day. 4 2 1 3 5 6 7 1 12-month calendar : Displays a calendar for a 12-month period. 2 Schedule mode : Click on the “Holiday“. button to select between the different modes “Week”, “Saturday”, Weekday : Make a schedule to loop for every weekday. Saturday : Make a schedule to loop for every Saturday.
7 Motion Schedule : Click this button to view the motion schedule set for weekday, saturday, holiday.
Holiday Holidaysetup setup 1. Click on the “Holiday” button to set up a holiday in the recording schedule. 1 3 2 1 Calendar : Select the date which you will designate as a holiday. Last year Last month Next year Next month Move to current date 2 Repetition : After setting up a holiday date, the user can create the holiday repetition period by day/week/month. no repetition : It will just record one day which is designated as a holiday.
4 5 6 7 4 Range : Set up the holiday by different time and count ranges. Unlimited : Will never stop looping the holiday. View count time : Set up number of holidays to repeat based on the starting day. End : Set up holiday from a specific starting day and finishing day. 5 Add : Add holiday date to the recording schedule. Click on the “Add” button to add a new designated holiday. 6 Update : Update holiday information. Click on the “Update” button to update holiday information.
6.4 Event 6.4.1 Motion detection Record images and generate alarms using individually assigned cameras for motion detection. Determine motion block areas, sensitivity and pre/post recording times. 3 3 2 4 1 1 Camera : Select the camera you wish to set up. 2 Motion detection grid : Displays the picture for the selected camera. Use the mouse to select and deselect blocks within the area to be used for motion detection.
5 8 6 7 9 10 Zone : Set the time period for which each area setup will be used. In the zone setting select the schedule mode and then select the area to set over the 24hr time line period. Block Count : Configure the number of blocks within the motion grid. Sensitivity : Set the sensitivity of the motion detection. Set All Area : Select all the motion detection blocks on the grid. Erase all area : Clear all the motion detection blocks from the grid.
9 Linked Camera : Link cameras to record upon motion detection in another camera, multiple cameras can be selected to be linked via motion.
6.4.2 Emergency Emergency events can be detected via motion detection, video loss or alarm-ins. Select the input numbers that are to be set up for an emergency event to record the emergency frame rate and to inform the remote computer when the event has occurred. 1 2 3 4 1 Motion : Select the cameras to be used to activate the emergency settings of the DVR upon motion detection. 2 Object Watch : Select the cameras to be used to activate the emergency setting of the DVR upon object watch.
6.4.3 Video loss Video loss setup is used for when the video signal is lost either through camera malfunction, cable disconnection, damage or other external tampering. When video loss occurs, it can be used to make another camera record or trigger an alarm and PTZ preset movement. 2 3 4 5 1 6 1 Camera : Select the channel to set up the camera. 2 Enable : Trigger the DVR internal speaker to beep when video loss occurs. 3 Camera : Indicate the name of the selected camera.
6.4.4 E-mail notice Send an e-mail to single or multiple accounts when an emergency occurs set by motion, object watch, video loss and alarm input. 1 2 5 3 4 6 1 Mail list name : Enter name of who will be added to the mail list. 2 Mail setup : Enter receiver, CC and the subject. Receiver : Enter receiver’s mail address. CC : Enter CC’s mail address. Subject : Enter the subject of the message. 3 Mail server setup : Enter information of server name, Mail address. ID, Password etc.
Manage Manageuser usermail mailgroups groups 2 1 6 10 11 3 7 4 9 5 8 1 Name : Input the contact name you wish to search for. 2 Search : Click the button to start the search. 3 Mail list : Displays all registered contact names and e-mail addresses in a list. 4 Add : Add new user name and e-mail address. 5 Del : Delete the selected user from the list. 6 Group Name : Select a group name from the drop-down menu, all e-mail contacts connected to the group name will then appear below in the group list.
6.5 Backup Establish a schedule that assigns backup recordings to be created at a certain time and date. The backup can be made to HDD, USB, CD or DVD on the local system. 1 2 6 3 4 5 7 8 9 1 Backup list name : Input backup name which will be added to the backup list. 2 Time : Select “Daily”, “Weekly”, “Monthly” or “Yearly” and the repetition period. Then select the start and end time range. Start Time : Enter the time you wish to start the backup.
Set Setup upMultiple Multiplebackup backupdrive drive 1 4 5 2 3 6 1 Media Type : Select drive wished to make as Multiple backup drive. 2 Available Drive(s) : This indicates drive for selected Media Type. 3 Selected Drive(s) : This indicates drive for selected Multiple backup drive. . 4 Add : Select drive on Available Drive(s) list and press “Add” button, then it will be added on Selected Drive(s) list.
6.6 Network 6.6.1 Connection Enter network details and configure network settings such as the bandwidth, port number and user connection number. 1 2 3 4 5 6 7 1 IP Auto Allocation (DHCP) : Check the IP Auto Allocation box to receive the address automatically from the DHCP server if the DVR is connected to a DHCP network. If connected to a LAN network without a DHCP server, then manually enter the network details for the connected network, input IP address, subnet mask and gateway.
6.6.2 DDNS A DVR system connected by DDNS does not require a static IP address. For this reason, the system can be connected to ADSL line with a dynamic IP. 1 2 3 4 5 6 7 8 1 Account : Enter ID and password for the DDNS server. 2 Server Address : Enter the address of server which provides DDNS service. 3 Server Port : Enter the port number of the DDNS server. 4 Client Port : Enter the client port number of DDNS. 5 Update Time : Enter the update time of DDNS information.
6.6.3 Stream control Set the stream control for all cameras by frame rate, resolution and quality. 1 2 3 4 5 1 Use : Select a camera on which you want to use transfer control. 2 Camera : It shows each camera number. 3 Remote frame : Control the frame rate which is transferred by each camera across the network. 4 Remote resolution : Set the resolution size to be transferred by each camera across the network.
6.6.4 Emergency Monitor This function transfers the pictures and data to Emergency Monitor on the client computer when an emergency or event occurs. You have to set up the remote IP address, port number and picture transfer time. 1 5 2 3 4 1 List Name : Enter the Emergency Monitor setup name for the account. 2 Remote Address : Enter the address information of the Emergency Monitor. Address : Enter the IP address of the remote client computer.
6.7 System 6.7.1 User Manage users and groups. This function can limit the authority of a user or group to manage the DVR, which enables the user to administer the unit effectively. 3 1 4 5 2 1 Group list : Displays current group accounts. Groups can be added or deleted from the list. 2 User list : Displays current user accounts. Users can be added or deleted from the list. 3 Account : Displays the information of user currently selected and is the area of data input for a new user.
6 7 8 E-Mail : Allow authority to set up E-mail sending. Backup : Allow authority to set up backup. Network : Allocate authorization to set up network connection. DDNS : Allow authority to set up DDNS. Stream Control : Allow authority to set up stream control. Setting : Allocate authorization to set up watermark, recording speed, system restarting and language features. Data/Time : Allow authority to set up the system data and time.
Setup Setupaanew newgroup groupaccount account 1. Click on the “Add” button to add a new group name. 2. Input the name and description of the group for account information. 3. If you click on the “OK” button, the group will be added to the group list.
Delete Deleteaagroup groupaccount account 1. Select the group you wish to delete. 2. Click on the “Del” button. 3. When the message box is shown as below, click on the “Yes” button. 4. Confirm that the group has been deleted from the group list.
Set Setup upaanew newuser useraccount account 1. Click on the “Add” button to add a user account. 2. Enter the user name, password, group, phone, e-mail and description. 3. Click on the “OK” button and the user will be added to the user list.
Delete Deleteaauser useraccount account 1. Select the user name you wish to delete. 2. Click on the “Del” button. 3. When the message is shown as below, click on the “Yes” button. 4. You can confirm that the user account has been deleted in the user list.
Set Setup upauthorization authorizationlevel levelfor forgroup groupaccounts accounts 1. Select the group for which you wish to allocate authorization changes in the group list. 2. Adjust the group authorization in the permission menus. 3. Click on the “OK” button to save the changes in authorization.
Set Setup upindividual individualuser useraccount accountauthorization authorizationlevel level 1. Select the user account for which you wish to configure authorization changes. 2. Adjust the user authorization in the permission menus. 3. Click on the “OK” button to save the changes in authorization.
6.7.2 Settings Configure the settings for instant playback, watermark, video format, recording type, system restarting and language. Also view the system log and upgrade the software. 2 1 3 4 6 5 1 Instant playback time : Set up the playback time. When you click on the the live screen, the playback will start by the set time period in this menu. 2 Instant backup time : Setup the instant backup time. When you click on the the live screen, the playback will start by the set time period in the menu.
7 6 8 9 10 7 Recording type : Choose between once and cycle type recording. If you choose the once type, the recording will stop when the hard disk is full. If you choose the cycle type, the recording will be continually loop the HDD storage. An alarm output can be used to indicate when the HDD is full. 8 System restarting : You can set the system to restart as a maintenance precaution.
Log Loginformation information Log information creates a record of all operations performed by the DVR system. If there is an event, system change or abnormal operation, this data can be located in the log. 1 2 3 4 1 Option : Here, you can set up the log path and duration. Log path : Indicates the path on the HDD where the log data will be stored. Click on the “Browse” button, then select the path where the log data will be stored. Duration : Enter the log data retention period.
6 5 7 8 9 5 View count : Select to limit the amount of log data on the display screen. 6 Page control : Use to select between pages within a log search. Go to first page Go to next page Goto Go to previous page Go to last page Current page number/total page number 7 Print : Print log on printer. 8 Save as : Save log data to another media. 9 Log list display : Displays the log information.
Import/export Import/exportConfiguration Configuration 4 5 1 3 2 1 System Configuration list : Displays the system setup configuration. After you select configuration, click on the Import or Export button. 2 Path : Displays location of system configuration file. 3 Browse : Click on the “Browse” button to select a folder to save. 4 Import : Import the configuration file to another DVR. 5 Export : Export the configuration file from another DVR.
6.7.3 Date/time Set the current date and time of DVR system, configure the local time zone and change the current time and date or synchronize the system time by the NTP server. 1 2 3 1 Date/Time Setup : Set up the time/date, time zone, date and time format, calendar format. ☞ [Note] Calendar Format • Calendar Format function is to select what day is displayed at first. The basic value is displayed from Sunday. • S, M ,T, W, T, F, S : from Sunday. • M, T, W, T, F, S, S : from Monday.
6.7.4 Information Displays the system information, disk space allocation and A/S history. 1 2 1 System : Displays the OS version, processor type, memory, LAN card, graphic card and HDD details. 2 System information : Displays the name of DVR, installed details, DVR software version, model name and A/S history.
7. Emergency Monitor 7.1 Opening Emergency Monitor The Emergency Monitor can receive the DVR status (motion, object watch, video loss, alarm-in) with pictures from the DVRs throughout the network. When user click “GMS Emergency Monitor” icon, The following login message for Emergency Monitor application wil be displayed. (Initial Password is set as ‘”111111” ) 7.2 Emergency Monitor screen 1 2 1 View Panel : Displays pictures from the DVR corresponding to the emergency event.
Search tab : Displays the event log list, set up search condition field (Server, Event, Channel) and then press the “Search” button Password tab : The following message for changing password on login will be displayed.
8. Event Monotor 8.1 Opening Event Monitor The Event Monitor can receive the DVR status (motion, object watch, video loss, alarm-in) with pictures from the DVRs throughout the network. Click on the button to run the Event Monitor application. 8.
Event EventMonitor MonitorLive Live 3 4 5 1 2 6 1 View Panel : Display pictures from the DVR corresponding to the emergency event. 2 Event Log List : Display Event log from DVR. The maximum number of event log is 1000 logs. Over 1000 logs, it will start to delete initial event log firstlys. 3 Event Live Button : It is a button to enter to Event Live mode. 4 Event Search Button : It is a button to enter to Event Search mode. 5 Configuration Button : It is a button to enter to Event Configuration mode.
Event EventMonitor MonitorSearch Search 1 3 4 2 5 6 1 View Panel : Displays pictures from the DVR corresponding to the emergency event. 2 Event Log List : It’s searching event item list. When user click event list, releated event image will be displayed.
Event EventMonitor MonitorConfiguration Configuration 1 2 3 4 5 1 Setting : Enable Auto Pop-up : When it receive Event Message (Motion, Object Watch, Video Loss, Alarm In) from DVR server, “Event Monitor” Application is pop up always automatically on top portion of screen. Execute Automatically : When executing “GMS Live View” Application, it executes automatically “Event Monitor” Application.
4 Event Setup : View Count : Set up the maximum event number on Event View. Over the maximum number, The initial event will be deleted, and the acknowledge information related with event will be deleted as well. 5 Log DB Setup : Set up a path recorded event item info & DB size. Maximum 1GB can be set up. When event occurs on DVR, received image and event info will be recorded on Log DB.
8. Remote Up-grader 9.1 Opening Remote Up-grader Remote Up-grader application allows the user to up-grade multiple DVR systems to a new version of software easily by network. Click on the “Upgrade” button to run the GMS Remote Up-grader application. 9.2 Remote Up-grader screen 2 1 3 4 5 6 7 1 Package Information : It shows information of the current S/W package selected, click the “Select Package” button to choose another S/W Package (Zip).
2 Server Information : Displays detailed information for the DVR selected in the server list. 3 Time display : Displays the logo and time. 4 Menu : Server Search Reload Server List Reload Server List :The DVR server list information can be refreshed by the button. Server Search : Search GMS for existing DVR accounts to add to the DVR Server list Press the button, then the search window is displayed as below, then enter the information of DVR that you want to search.
Appendix 1. Supported CD/DVD-RW Drive List * CD/DVD-R/RW Drive not in the list might not be supported.
Company Model CB-2100A, ND-1100A, ND-1200A, ND-1300A, ND-2100A, ND-2100AD, ND-2300A, ND-2500A, ND-2500A2, ND-2510A, NEC ND-3100A, ND-3500A, ND-5000A, ND-5100A, ND-5200A, ND-5300A, ND-5500A, NR-7700A, NR-7800A, NR-7900A, NR-8400A, NR-8500A, NR-9100A, NR-9200A, NR-9300A CDD3801, CDD4201, CDD4401, CDD4401, CDD4801, PHILIPS CDRW2010K, DVD8301, DVD8421, DVDRW1208, DVDRW228, DVDRW416N, PCRW1208K, RWDV2010K Pioneer DVR-103, DVR-104, DVR-105, DVR-106, DVR-106D, DVR-107, DVR-108, DVR-109, DVR-S303, DVR-S502
Company Model CRX100E, CRX120E, CRX140S, CRX140E, CRX145S, CEX145E, CRX160S, CRX160E, CRX175E, CRX185E, CRX195E, CRX200E, SONY CRX215E, CRX75A, CRX75U, CRX85A, CRX85U, DRU110A, DRU120A, DRU-500A, DRU-500UL, DRU-510A, DRU-510UL, DRU-530A, DW-U12A DVDRW0404N, VeloCD8432, VeloCD121032, VeloCD161040, TDK VeloCD161040, VeloCD241040, VeloCD241040, VeloCD321040, VeloCD401248 CD-W224E, CD-W24E, CD-W28E, CD-RW280PU, CD-W54E, TEAC CD-W58E, CD-W512EB, CD-512SB, CD-W516EB, CD-W524EB, CD-W540E, CD-W548E, DV-50