User Manual

ManualsBrandsRicoh ManualsCamera & PhotoDigital Camera with WLAN

151

Downloading Images to Your Computer

• To load images from the camera with assistance from the Windows XP

“Scanner and Camera Wizard”, select [Microsoft Scanner and Camera

Wizard].

• Leaving the [Always use this program for this action] check box

unchecked will cause the [Caplio 500SE] screen to be displayed each

time you transfer images from the camera, thereby allowing you to

choose whether to use [RICOH Gate La] or the [Microsoft Scanner and

Camera Wizard] for image transfers.

• If your PC is installed with Windows XP Service Pack 2 and a warning

message is displayed, see P.230.

Note ----------------------------------------------------------------------------------------------

• If the computer does not recognize the camera, uninstall the software (GP.140)

and install it again.

• When downloading images from your camera, load a battery with adequate remaining

power in the camera. Use of the AC adapter (sold separately) is recommended.

• When transferring images to a computer using RICOH Gate La, the file being

transferred is renamed and saved.

You can download images from the camera to a computer without

having to use software.

Change [USB CONNECTION] to [MASS STR] on the

SETUP menu.

• For more details, see P.123. At the time of purchase, [ORIGINAL] is

selected.

Make sure that the camera power is off.

Connect the accessory USB cable to a USB port of your

computer.

Connect the USB cable to the

USB terminal of your camera.

• Your camera turns on.

• Your computer automatically reads a

file necessary for recognizing the

camera as a drive.

• After this preparation, the camera is displayed as a drive at [My

Computer] (Windows) or Desktop (Macintosh).

Downloading Images in Mass Storage Mode

Example of the display in

Windows XP

L7360874_En_00_0_bookfile.book Page 151 Friday, October 13, 2006 12:56 PM

Summary of content (30 pages)

PAGE 1
L7360874_En_00_0_bookfile.book Page 151 Friday, October 13, 2006 12:56 PM • To load images from the camera with assistance from the Windows XP “Scanner and Camera Wizard”, select [Microsoft Scanner and Camera Wizard].
PAGE 2
L7360874_En_00_0_bookfile.book Page 152 Friday, October 13, 2006 12:56 PM 5 From the displayed drive, copy a file to the desired location. • The figure at right shows the folder configuration in the drive. • When the contents of the internal memory are displayed, the drive name is [RICOHDCI].
PAGE 3
L7360874_En_00_0_bookfile.book Page 153 Friday, October 13, 2006 12:56 PM Card Reader This is a device connected to a computer to read the contents of cards. In addition to the memory card adapter-type, there are card readers compatible with various types of cards, into which you can directly load an SD memory card. Disconnecting the Camera from Your Computer For Windows 1 Double-click the [Safely Remove Hardware] icon at the right end of the task bar.
PAGE 4
L7360874_En_00_0_bookfile.book Page 154 Friday, October 13, 2006 12:56 PM 8 Using the Bluetooth® Function About the Bluetooth® Function The Bluetooth® function enables the camera to wirelessly connect to a Bluetooth®-enabled computer, printer or other peripheral device. Bluetooth®-enabled devices can be wirelessly connected without cables. This technology is a popular method for sending and receiving data among various types of devices, such as computers, peripheral devices, and home appliances.
PAGE 5
L7360874_En_00_0_bookfile.book Page 155 Friday, October 13, 2006 12:56 PM Expanded Settings Menu You can set the Bluetooth® function, GPS information, or wireless LAN (only for Caplio 500SE-W) by displaying the Expanded Settings menu from the Shooting Setting menu (GP.59) or Playback Setting menu (GP.88). The Expanded Settings menu enables you to set the items listed in the table below.
PAGE 6
L7360874_En_00_0_bookfile.book Page 156 Friday, October 13, 2006 12:56 PM 2 Press the $ button twice. • The Expanded Settings menu is displayed. The menu items are provided on four screens. 3 Press the !" buttons to select the desired menu item. • Press the " button at the bottom item to display the next screen. Using the Bluetooth® Function 8 4 Press the $ button. • The menu item settings are displayed. 5 Press the !" buttons to select the setting.
PAGE 7
L7360874_En_00_0_bookfile.book Page 157 Friday, October 13, 2006 12:56 PM Sending Still Images to a Printer (PRINT) You can send still images from the camera to a Bluetooth®-enabled printer to have them printed. Images are sent from the internal memory when no SD memory card is loaded or from an SD memory card when installed. There are three ways to send images to a printer. • Send one image (GP.157) • Send all images from the camera (GP.157) • Select and send several images (GP.
PAGE 8
L7360874_En_00_0_bookfile.book Page 158 Friday, October 13, 2006 12:56 PM 5 Press the " button to select [PRINT], and then press the $ button. • When the Bluetooth® function is used for the first time, a screen appears confirming whether to search for a destination device. • If you have already searched for a destination device, a list of destination devices appears. Go to Step 7.
PAGE 9
L7360874_En_00_0_bookfile.book Page 159 Friday, October 13, 2006 12:56 PM 8 Press the !" button and [SEND ONE] to send one image or [SEND ALL] to send all images, and then press the MENU/OK button. • Transfer of the images to the destination device begins and the progress is displayed. Pressing the DISP. button cancels the operation. Pressing the 6 (Playback) button or shutter release button also cancels the operation.
PAGE 10
L7360874_En_00_0_bookfile.book Page 160 Friday, October 13, 2006 12:56 PM 5 Press the " button to select [PRINT], and then press the $ button. • When the Bluetooth® function is used for the first time, a screen appears confirming whether to search for a destination device. • If you have already searched for a destination device, a list of destination devices appears. Go to Step 7.
PAGE 11
L7360874_En_00_0_bookfile.book Page 161 Friday, October 13, 2006 12:56 PM 9 Repeat Step 8 to select all the files you want to send. • If you selected a file by mistake, you can deselect it by selecting the file and pressing the MENU/OK button again. 10 Press the DISP. button. • A screen appears indicating the printing format and number of files. 11 Press the MENU/OK button. 12 Press the MENU/OK button. • The display returns to the playback screen.
PAGE 12
L7360874_En_00_0_bookfile.book Page 162 Friday, October 13, 2006 12:56 PM Entering an Authentication Passkey for a Destination Device The authentication passkey is a code used to authenticate two devices connecting using the Bluetooth® function. If the passkey is set on the destination device, a message appears when connecting to that device. Follow the procedure below to enter the passkey. 1 Using the Bluetooth® Function 8 2 3 Press the MENU/OK button. • The keyboard screen appears.
PAGE 13
L7360874_En_00_0_bookfile.book Page 163 Friday, October 13, 2006 12:56 PM How to Use the Keyboard To use the keyboard, follow the steps below. Switching among letters, numbers and symbols When there is a cursor at the leftmost or rightmost character on the keyboard, press the #$ buttons to switch the character type among numbers, symbols, lowercase letters and uppercase letters.
PAGE 14
L7360874_En_00_0_bookfile.book Page 164 Friday, October 13, 2006 12:56 PM Entering a space 1 2 Press the !"#$ buttons to select [SPACE]. Press the ADJ./MEMO button. Inserting a character Using the Bluetooth® Function 8 164 1 Press the !"#$ buttons to select one of the characters at the top of the keyboard. 2 Press the ! button. • The cursor moves to the right of the input characters. 3 Press the #$ buttons to position the cursor to the right of the point where you want to insert a character.
PAGE 15
L7360874_En_00_0_bookfile.book Page 165 Friday, October 13, 2006 12:56 PM Deleting a character 1 Press the !"#$ buttons to select one of the characters at the top of the keyboard. 2 Press the ! button. • The cursor moves to the right of the input characters. Press the #$ buttons to position the cursor to the right of the character you want to delete. 4 Press the " button to return the cursor to the keyboard. 5 Press the !"#$ buttons to select [BS], and then press the ADJ./MEMO button.
PAGE 16
L7360874_En_00_0_bookfile.book Page 166 Friday, October 13, 2006 12:56 PM Sending Still Images to Your Computer (FILE SEND) You can send still images from the camera to a Bluetooth®-enabled computer. The sent images are processed according to the computer settings. Images are sent from the internal memory when no SD memory card is loaded or from an SD memory card when installed. There are three ways to send images to a printer. • Send one image (GP.167) • Send all images from the camera (GP.
PAGE 17
L7360874_En_00_0_bookfile.book Page 167 Friday, October 13, 2006 12:56 PM Sending One or All Still Images 1 Check that the destination device (computer) is turned on. 2 Press the 6 (Playback) button. • For Caplio 500SE-W, check that [CHANGE COM] is set to [BT] on the Expanded Settings menu. (GP.193) • To send all still images, go to Step 4. 3 4 Press the #$ buttons to select an image to send. Press the MENU/OK button. • The Playback Setting menu appears.
PAGE 18
L7360874_En_00_0_bookfile.book Page 168 Friday, October 13, 2006 12:56 PM 7 Press the !" buttons to select the desired destination device and then press the MENU/OK button. • If the desired destination device is not listed, press the ADJ. button to search again for destination devices. • Select a destination device and press the $ button to display information about the destination device. • To delete a destination device from the list, select the device and press the D (Delete) button.
PAGE 19
L7360874_En_00_0_bookfile.book Page 169 Friday, October 13, 2006 12:56 PM Sending Several Still Images 1 Check that the destination device (computer) is turned on. 2 Press the 6 (Playback) button. • For Caplio 500SE-W, check that [CHANGE COM] is set to [BT] on the Expanded Settings menu. (GP.193) 3 Press the 9 (Thumbnail Display) button twice. • The screen is divided into 12 frames and thumbnails of the still images are displayed. 4 Press the MENU/OK button. • The Playback Setting menu appears.
PAGE 20
L7360874_En_00_0_bookfile.book Page 170 Friday, October 13, 2006 12:56 PM 7 8 Using the Bluetooth® Function 9 10 11 8 12 Press the !" buttons to select the desired destination device and then press the MENU/OK button. • If the desired destination device is not listed, press the ADJ. button to search again for destination devices. • Select a destination device and press the $ button to display information about the destination device.
PAGE 21
L7360874_En_00_0_bookfile.book Page 171 Friday, October 13, 2006 12:56 PM Sending Images in Shooting Mode (QUICK SEND MODE) Immediately after you shoot a still image, you can send that image to another device. This is convenient if you want to send images to a predetermined device. You need to set [QUICK SEND MODE] on the Expanded Settings menu beforehand.
PAGE 22
L7360874_En_00_0_bookfile.book Page 172 Friday, October 13, 2006 12:56 PM Using Quick Review Send When [QUICK SEND MODE] is set to [1TOUCH] 1 2 3 Check that the destination device is turned on. Turn the mode dial to 5/K and shoot the picture. • While the image is displayed after shooting, a screen appears confirming whether to send the image. (GP.116) Press the MENU/OK button. • Transfer of the image to the previous destination device begins.
PAGE 23
L7360874_En_00_0_bookfile.book Page 173 Friday, October 13, 2006 12:56 PM When [QUICK SEND MODE] is set to [2TOUCH] 1 2 3 4 6 Turn the mode dial to 5/K and shoot the picture. Press the Q (Quick Review) button. • A screen appears confirming whether to send the image. Press the MENU/OK button. • When the Bluetooth® function is used for the first time, a screen appears confirming whether to search for a destination device.
PAGE 24
L7360874_En_00_0_bookfile.book Page 174 Friday, October 13, 2006 12:56 PM 7 Using the Bluetooth® Function 8 Press the MENU/OK button. • Transfer of the images to the destination device begins and the progress is displayed. Pressing the DISP. button cancels the operation. Pressing the 6 (Playback) button or shutter release button or turning the mode dial also cancels the operation. • If a passkey is required to connect to the destination device, a message appears prompting you to enter the passkey. (GP.
PAGE 25
L7360874_En_00_0_bookfile.book Page 175 Friday, October 13, 2006 12:56 PM Making Advanced Bluetooth® Settings Registering an Authentication Passkey for a Device (PASS KEY) The authentication passkey is a code used to authenticate two devices connecting using the Bluetooth® function. If a passkey is required to connect to a destination device, the authentication passkey can be registered in the camera beforehand so that the passkey can be authenticated automatically when connecting to the device.
PAGE 26
L7360874_En_00_0_bookfile.book Page 176 Friday, October 13, 2006 12:56 PM Changing the Number of Discoverable Devices (SEARCH COUNT) You can set the maximum number of Bluetooth® devices that can be discovered each time a search is performed. Select between one and ten devices. The default setting is [5]. 1 Display the Expanded Settings menu. • For the operating procedure, see P.155. Using the Bluetooth® Function 8 176 2 Press the " button to select [SEARCH COUNT] and press the $ button.
PAGE 27
L7360874_En_00_0_bookfile.book Page 177 Friday, October 13, 2006 12:56 PM Connecting to Several Devices at the Same Time (MASTER/SLAVE) You can connect the camera to one Bluetooth® device or multiple devices at the same time. Available Settings MASTER (Connect to several devices at the same time) SLAVE (Connect to one device) *Default setting 1 Display the Expanded Settings menu. • For the operating procedure, see P.155. Press the " button to select [MASTER/SLAVE] and press the $ button.
PAGE 28
L7360874_En_00_0_bookfile.book Page 178 Friday, October 13, 2006 12:56 PM Selecting the Size of Images to Be Sent (IMAGE FILE SIZE) You can select the size of still images to be sent. Available Settings NO ALTER (Do not change the image size) 1280 640 *Default setting 320 160 1 Display the Expanded Settings menu. • For the operating procedure, see P.155. Using the Bluetooth® Function 8 178 2 Press the " button to select [IMAGE FILE SIZE] and press the $ button.
PAGE 29
L7360874_En_00_0_bookfile.book Page 179 Friday, October 13, 2006 12:56 PM Automatically Deleting Sent Images (AUTO DEL) You can set the camera to automatically delete a file from the camera after it has been sent to a computer or a printer. Available Settings ON (Automatically delete a still image after it has been sent) OFF (Do not delete a still image after it has been sent) *Default setting 1 Display the Expanded Settings menu. • For the operating procedure, see P.155.
PAGE 30
L7360874_En_00_0_bookfile.book Page 180 Friday, October 13, 2006 12:56 PM 9 Using the GPS Function About the GPS Function This camera can obtain and use GPS (Global Positioning System) information (longitude and latitude) in two ways. The first is by connecting the camera directly to a GPS module. The second is by using a Bluetooth® SPP (Serial Port Profile) to connect to a Bluetooth® GPS unit. You can record GPS information on shot still images.