e_kb601_StartGuide_EN.book Page 1 Thursday, August 9, 2018 10:28 AM RICOH IMAGING COMPANY, LTD. 1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN (http://www.ricoh-imaging.co.jp) RICOH IMAGING EUROPE Parc Tertiaire SILIC 7-9, avenue Robert Schuman S.A.S. B.P. 70102, 94513 Rungis Cedex, FRANCE (http://www.ricoh-imaging.eu) RICOH IMAGING 5 Dedrick Place, West Caldwell, New Jersey 07006, AMERICAS CORPORATION U.S.A. (http://www.us.ricoh-imaging.
e_kb601_StartGuide_EN.book Page 2 Thursday, August 9, 2018 10:28 AM Thank you for purchasing this RICOH WG-60 Digital Camera. This Start Guide provides information on how to get your RICOH WG-60 ready for use and its basic operations. To ensure proper operation, please read this Start Guide before using the camera. For details on how to use the various shooting methods and settings, please refer to the Operating Manual (PDF) posted on our website. Refer to p.59 for details on the Operating Manual.
To users of this camera • Do not use or store this camera in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the display, damage the stored data, or affect the camera’s internal circuitry and cause camera misoperation. • The liquid crystal panel used for the display is manufactured using extremely high precision technology.
About the Camera Warning • Do not attempt to take the camera apart or modify the camera. High voltages are present within the camera, and there is a danger of electric shock if the camera is taken apart. • If the inside of the camera should become exposed as a result of, for example, the camera being dropped, please do not under any circumstances touch such exposed portions, as there is a danger of receiving an electric shock. • Wrapping the strap around a neck is dangerous.
Caution • Do not place or drop heavy objects on or forcefully bend the USB cable. Doing so may damage the cable. Should the cable be damaged, consult your nearest service center. • Do not touch or short-circuit the terminal area of the USB cable while the cable is plugged in. • Do not handle the AC plug with wet hands. This can cause an electric shock. • Do not subject the product to strong impacts or allow it to drop onto a hard surface. This can cause a malfunction.
Care to be Taken During Handling Before Using Your Camera • When the camera has not been used for a long time, confirm that it is still working properly, particularly prior to taking important pictures (such as at a wedding or when traveling). Contents of the recording cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or recording media (SD Memory Card), etc. • The lens on this camera is not interchangeable.
Storing Your Camera • Avoid storing the camera where pesticides and chemicals are handled. Remove the camera from its case and store it in a well-ventilated place to prevent the camera from becoming moldy during storage. • Avoid using or storing the camera where it may be exposed to static electricity or electrical interference. • Avoid using or storing the camera in direct sunlight or in locations where it may be exposed to rapid changes in temperature or to condensation.
Contents Using Your Camera Safely.................................................................................... 1 Care to be Taken During Handling........................................................................ 4 Contents................................................................................................................ 6 Checking the Contents of the Package ................................................................... 7 Names of Parts.........................................
Checking the Contents of the Package Camera RICOH WG-60 Strap O-ST104 (*) USB cable I-USB157 (*) Rechargeable lithium-ion battery D-LI92 (*) Power adapter D-PA164 Macro stand O-MS1 Start Guide (this manual) Regarding Waterproof, Dustproof, and Shockproof Design * Available as optional accessories.
Names of Parts Front Power button/Power lamp (green) Lens Shutter release button Flash Speaker Microphone Remote control receiver Self timer lamp/ Focus assist light LED Macro Lights Back Display Remote control receiver Tripod socket Terminal cover Terminal cover lock lever Battery/card cover lock lever Battery/card cover USB terminal HDMI terminal 8 Battery lock lever
Names of Operating Parts 1 2 3 4 5 6 8 9 7 1 Power button Turns the camera on and off (p.21). 2 Shutter release button A Mode: Focuses the camera on the subject when pressed halfway in Still Picture Capture Mode (except when the focus mode is set to 3, s, and \) (p.30). Takes a still picture when pressed down fully (p.31). Pressing down fully starts and stops movie recording in C (Movie), (Underwater Movie), and (High Speed Movie) modes (p.43). Q Mode: Switches to A mode.
4 Q button A Mode: Switches to Q mode. Q Mode: Switches to A mode. 5 Four-way controller A Mode: (2) : Changes the drive mode (p.36). (3) : Displays the Capture Mode Palette (p.34). (4) : Changes the flash mode (p.39). (5) : Changes the focus mode (p.40). (23) : Adjusts the focus when the focus mode is set to \ (p.41). Q Mode: (2) : Plays back and pauses a movie (p.45). (3) : Displays the Playback Mode Palette (p.48). Stops a movie during playback (p.45).
Switches from folder/calendar display to 12-image display with the cursor placed on the most recent image. 8 9 Movie button A Mode: Starts movie recording in Still Picture Capture Mode (p.44). Green/i button A Mode: Switches to 9 (Green) mode. Calls up the assigned function. Q Mode: Switches from single-image display to the Delete screen (p.49). Switches from 6- or 12-image display to the Select & Delete screen. Switches from folder display to the calendar display screen.
Display Indications Display in A Mode The display changes in the following sequence each time you press the 4 button: “Normal Display”, “Histogram + Info”, “Grid Display”, “No Info”, “LCD Off”. Normal Display/ Histogram + Info/ Grid Display in Still Picture Capture Mode 1 to 18 and A1 appear when “Normal Display” is selected. B1 to B6 appear at the position of 16 when “Histogram + Info” is selected. Only A1 appears when “Grid Display” or “No Info” is selected.
* 6 and 7 are only displayed when the shutter release button is pressed half-way. * For 8, M is displayed when Pixel Track SR is set to O (On) on the [A Rec. Mode] menu. f is displayed when the shutter release button is pressed halfway if Pixel Track SR is set to P (Off) and there is a danger of camera shake. * For 13, when the focus mode is set to = and the Auto Macro function is activated, q appears on the display (p.40). * 14 changes depending on [FlashAir] setting in the [W Setting] menu.
A1 A2 A3 A4 A5 A6 A7 A8 A9 Face Detection icon Playback mode Q : Still picture (p.45) K : Movie (p.45) Battery level indicator (p.18) Protect icon Four-way controller guide File number Folder number Memory status (p.21) FlashAir communication status A10 B1 B2 B3 B4 B5 B6 B7 B8 Volume icon Shutter speed Aperture Histogram Sensitivity Recorded Pixels Quality Level White Balance AE Metering * A1 appears only if the Face Detection function worked when the image was shot.
Powering the Camera Installing the Battery Use the rechargeable lithium-ion battery D-LI92 that is provided with the camera. Battery lock lever Battery/card cover lock lever Battery 1 2 Battery/card cover Open the battery/card cover. Press the battery/card cover lock lever in the direction shown 1, slide the cover towards 2 and open it towards 3. Using the side of the battery to press the battery lock lever in the direction of 4, insert the battery with the PENTAX logo pointing toward the lens.
Removing the Battery 1 2 Open the battery/card cover. Push the battery lock lever towards 4. The battery will be ejected. Take care not to drop the battery when removing it. • Do not use excessive force when opening and closing the battery/card cover because the waterproof seal may peel off. If the seal is not in the correct position, the camera will not be waterproof. • If the battery/card cover is not locked securely, water, sand, or dirt may get into the camera.
Charging the Battery Connect the supplied power adapter (D-PA164) to the camera and charge the battery before using it for the first time or after a long period of non-use, or when the [Battery depleted] message appears. Power lamp While charging: Blinks Charging finished: Turns off To power outlet 4 3 Power adapter USB cable 2 1 2 3 4 5 Make sure that the camera is turned off and open the terminal cover.
6 7 Remove the USB cable from the camera. Close the terminal cover. Close the terminal cover in the opposite direction indicated by 3. While lightly pressing on the cover, slide it away from 2 until it clicks. • Do not use the supplied power adapter (D-PA164) for any other purpose than that of connecting to this camera and charging the designated battery. Doing otherwise may cause a connected device to be damaged or overheated.
Installing an SD Memory Card This camera uses SD Memory Cards, SDHC Memory Cards or SDXC Memory Cards. Captured images are saved on the SD Memory Card if a card is inserted in the camera. They are saved in the built-in memory if a card is not inserted (p.21). • Be sure to use this camera to format (initialize) an SD Memory Card that is unused or has been previously used on other cameras or digital devices. • Make sure that the camera is turned off before inserting or removing the SD Memory Card.
SD Memory Card socket 1 2 3 Battery/card cover SD Memory Card Open the battery/card cover. Press the battery/card cover lock lever in the direction shown 1, slide the cover towards 2 and open it towards 3. Insert the SD Memory Card into the SD Memory Card socket so that the label is facing toward the front of the camera (the side with the lens). Push the card in all the way. Images may not be recorded correctly if the card is not inserted all the way.
Turning the Camera On and Off 1 Press the power button. 2 The camera turns on and both the power lamp and display turn on. If the [Language/ ] screen or [Date Adjustment] screen appears when you turn the camera on, follow the procedure on p.22 to set the display language and/ or current date and time. Press the power button again. The camera turns off and both the power lamp and display turn off. Taking Still Pictures 1p.
Initial Settings The [Language/ ] screen appears when the camera is turned on for the first time. Perform the operations in “Setting the Display Language” below to set the language, and in “Setting the Date and Time” (p.23) to set the current date and time. Setting the Display Language 1 2 Use the four-way controller (2345) to choose the display language. Press the 4 button. The [Initial Setting] screen appears in the selected language.
Setting the Date and Time Set the current date and time and the display format. 1 2 Press the four-way controller (5). The frame moves to [mm/dd/yy]. Use the four-way controller (23) to choose the date and time display format. Choose from [mm/dd/yy], [dd/mm/yy] or [yy/ mm/dd]. Date Adjustment Date Format mm/dd/yy 24h Date 01/01/2018 00:00 Time Settings complete MENU Cancel 3 4 5 6 7 8 9 10 Press the four-way controller (5). The frame moves to [24h].
Setting the Camera Functions To change the camera settings, press the 3 button to display the [A Rec. Mode] menu or [W Setting] menu. Functions for playing back and editing images can be accessed from the Playback Mode Palette. Operating the Menus There are three types of menus: [A Rec. Mode], [C Movie] and [W Setting]. Press the 3 button in Still Picture Capture Mode to display the [A Rec. Mode] menu. Press the 3 button in Movie Mode to display the [C Movie] menu.
• Available button and key operations appear on the display during menu operation. • The 3 button function varies depending on the screen. Refer to the guide indications. MENU Exit Exits the menu and returns to the original screen. MENU Returns to the previous screen with the current settings. MENU Cancel Cancels the current selection, exits the menu and returns to the previous screen.
Menu List The following list shows the items that can be set with the menus and provides descriptions of each item. [A Rec. Mode] Menu This menu provides the functions related to taking still pictures and recording movies.
Item Description For choosing whether or not to use the digital zoom For choosing whether to display Instant Instant Review Review For choosing whether to save the set Memory values of the shooting functions or return to the defaults when the camera is turned off For assigning a function to the Green Green Button button in A mode Sharpness For choosing sharp or soft outlines For setting the color saturation.
Item Description For setting the alarm For setting the Hometown and Destination World Time cities Text Size For setting the text size of the menu For setting the language in which menus Language/ and messages appear For choosing how names are assigned to Folder Name folders for storing images For choosing how names are assigned to File Name images For setting the method for connecting the USB Connection camera to a PC by the USB cable (MSC or PTP) For setting the HDMI output format when HDMI Out connecting
Resetting to Default Settings (Reset) You can reset the camera settings to their defaults. 1 2 3 Use the four-way controller (23) to select [Reset] in the [W Setting] menu. Press the four-way controller (5). The [Reset] screen appears. Use the four-way controller (2) to select [Reset]. Reset Returns to default settings Reset Cancel OK 4 OK Press the 4 button. The settings return to the defaults. Displaying the Clock Display You can use the camera as a clock.
Taking Still Pictures Taking Pictures This camera has various functions and shooting modes that support a wide array of scenes and subjects. This section explains shooting with the default settings when shipped. 1 2 Press the power button. The camera turns on and is ready to take still pictures. In this manual, this is called Still Picture Capture Mode. Check the subject and shooting information on the display. The focus frame in the middle of the display indicates the automatic focusing area.
4 Press the shutter release button fully. The picture is taken. The flash discharges automatically depending on the light conditions. The image appears on the display temporarily (Instant Review) and is saved to the SD Memory Card or the built-in memory. f is displayed when the shutter release button is pressed halfway if there is a risk of camera shake. Using the Shutter Release Button The shutter release button works in a two-step action as follows.
Using the Zoom You can use the zoom to change the captured area. 1 Press the W/T button in A mode. W Wide (left) Widens the area that is captured by the camera. T Tele (right) Enlarges the subject. Zoom ratio Zoom bar 36.0 If you continue to press T, the camera automatically switches from optical zoom to Intelligent Zoom and stops at the point where 38 the zoom switches to digital zoom. Once the button is released and pressed again, the camera switches to digital zoom.
Recorded Pixels i (*2) V (*2) Intelligent Zoom (The zoom ratio includes the 5x optical zoom.) Digital zoom Not Available (5x optical zoom only) Not Available (5x optical zoom only) l Equivalent to approx. 36x Approx. 22.5x Approx. 36x (same as digital zoom) m (*1) Intelligent Zoom and digital zoom are not available when (Report) mode is set. (Only 5x optical zoom is available.) (*2) indicates values that can only be set when (Report) mode is set.
The following modes can be selected from the Capture Mode Palette. Item Description Page The camera automatically selects the appropriate shooting mode from the following fifteen modes b Auto Picture Standard Night Scene Night Scene Portrait Landscape Flower Portrait Sport Candlelight Blue Sky Portrait× Blue Sky Portrait× Backlight Sunset Portrait× Sunset Group Photograph Text * When the camera detects the pet’s face, the shutter is automatically released. Used for basic shooting.
Item c Description Page Portrait For capturing portraits. Reproduces a healthy and bright skin tone Underwater For capturing images underwater Underwater Movie Use this mode for taking underwater movies Interval Shot Shoots a series of images at a specified interval of time Interval Movie Shoots a series of images at a specified interval, and saves them as a movie Q Surf & Snow For bright images such as sand or snow.
• In shooting modes other than R (Program), A (Night Scene), C (Movie), (Digital Microscope), (Handheld Night Snap), (Interval Shot), (Interval Movie), (High Speed Movie), and c (Digital SR), Saturation, Contrast, Sharpness, White Balance, etc. are automatically set to the optimal settings for the selected mode. • Some functions may not be available or may not function fully depending on the selected shooting mode. • The shutter speed tends to be slower when taking pictures of dark scenes.
4 Press the shutter release button to take a picture. The countdown starts and the remaining seconds are displayed on the screen. If you select g The self-timer lamp and all of the LED Macro Lights turn on. From 5 seconds before shooting, the LED Macro Lights turn off in order from the top right. From 3 seconds before shooting, the self-timer lamp blinks. If you select Z The self-timer lamp and the LED Macro Lights blink. The picture is taken after a countdown of either ten seconds or two seconds.
Setting the Shooting Functions Using the Rec. Mode Menu Items Settings for shooting are mostly set from the [A Rec. Mode] menu. Refer to explanations for each function on how to make these settings. 1 2 Press the 3 button in Still Picture Capture Mode. The [A Rec. Mode] menu appears. Pressing the 3 button in Movie Mode displays the [C Movie] menu. Use the four-way controller (2345) to select an item and set it up. To Save the Setting and Start Taking Pictures 3 After setting, press the 3 button.
• Some functions may not be available or may not function fully depending on the selected shooting mode. • The 3 button function varies depending on the screen. Refer to the guide indications. MENU Exit Exits the menu and returns to the original screen. MENU Returns to the previous screen with the current settings. MENU Cancel Cancels the current selection, exits the menu and returns to the previous screen.
1 Press the four-way controller (4) in A mode. The [Flash Mode] screen appears. The flash mode changes each time the button is pressed. You can also change the setting using the four-way controller (23). 2 In (Underwater) mode, (Flash Off + Flash On (2 shots)) appears instead of c (Auto + Red-eye) and d (Flash On + Redeye) as shown on the right. When you select (Flash Off + Flash On (2 shots)), two images are taken in succession in a (Flash Off) and b (Flash On).
3 Pan Focus s Infinity This mode is used when you ask someone to take pictures for you, or when taking pictures of the scenery through the window of a car or train. The entire picture, from the front to the back, is focused. This mode is used for taking distant objects. The flash is set to a (Flash Off). \ Manual Focus This mode lets you adjust the focus manually. 1 Press the four-way controller (5) in A mode. Focus Mode Standard The [Focus Mode] screen appears.
4 Press the four-way controller (23). The \ indicator appears on the display to indicate the approximate distance to the subject. Use the four-way controller (23) to adjust the focus using the indicator as a guide. 2 for distant focus 3 for closer focus 5 2m 1 0.5 MENU OK OK \ indicator Press the 4 button. The focus is locked and the camera returns to capture mode. After the focus is locked, you can press the four-way controller (5) again to display the \ indicator and readjust the focus.
Recording Movies Recording Movies This mode enables you to record movies. Sound is recorded at the same time. 1 2 Use the four-way controller (2345) to select C (Movie) from the Capture Mode Palette. Press the 4 button. 1 The C (Movie) mode is selected and the camera returns to capture mode. The following information appears on the display.
• The focus mode can be changed before recording starts. • When the focus mode is set to \(Manual Focus), you can adjust the focus before recording starts and during recording. • When the shooting mode is set to C (Movie), Face Detection is automatically set to on. You can select Smile Capture or Face Detection Off before starting recording a movie. When the Smile Capture function is activated, movie recording starts automatically when the camera recognizes the subject’s smile.
Playing Back Images Playing Back Still Pictures 1 Press the Q button after taking a picture. File number 10 - 0038 100 003 The camera enters Q mode and the image appears on the display. Displaying one image in full in Q mode (default setting) is called single-image display. Edit 07/07/2018 14:25 To Play Back the Previous or Next Image 2 Press the four-way controller (45). The previous or next image appears.
The following operations can be performed during playback. Four-way controller (2) Pauses playback Zoom button right (y) Increases the volume Zoom button left (f) Reduces the volume Press and hold the four-way controller (5) Fast-forwards playback Press and hold the four-way controller (4) Fast-reverses playback The following operations can be performed while playback is paused.
100 - 0038 100 10 - 0038 003 100 - 0038 Edit Edit 1 0 / 007/07/2018 2 / 0 2 14:25 1 4 : 2'02/02/'12 5114:25 0 / 0 2 / 0 2 14:25 14:25 Edit '02/02/'12 MENU Image Rotation 1/2 Slideshow For continuously playing back images. Screen or sound effects can be set MENU Cancel Rotates captured images.
Playback Mode Palette Playback Mode Description For continuously playing back images. Screen or sound effects can u Slideshow be set Rotates captured images.
Deleting Images Delete images that you do not want to keep. Deleting a Single Image You can delete a single image. Protected images cannot be deleted. 1 2 3 Enter Q mode and use the four-way controller (45) to choose the image you want to delete. Press the i button. A confirmation screen appears. Use the four-way controller (2) to select [Delete]. 100 - 0017 Delete Cancel OK 4 OK Press the 4 button. The image is deleted.
Appendix Main Specifications Type Fully automatic compact digital camera with built-in zoom lens Number of Effective Pixels Approx. 16 megapixels Image Sensor 1/2.3 inch CMOS Number of Recorded Still Pixels * * * * h in Digital Microscope mode. f/ in Burst Shooting mode. h/i/V in Report mode. f/ in Original Frame mode.
Approximate Image Storage Capacity and Recording Time Still 2 GB SD Memory Card C D E Built-in Memory C D E (4608 x 3456) 13 23 38 370 653 1078 (3456 x 3456) 15 30 46 435 853 1307 (4608 x 2592) 15 30 46 435 853 1307 (3072 x 2304) 23 43 69 653 1205 1921 (3072 x 1728) 27 53 76 778 1499 2119 (2592 x 1944) 27 53 76 778 1499 2119 (2592 x 1464) 36 69 99 1024 1921 2794 (2048 x 1536) 43 85 124 1205 2364 3415 (1600 x 1200) 69 124 167 1921 3415 4728 h
White Balance Auto, Daylight, Shade, Tungsten Light, Fluorescent Light (Daylight Colors/Daylight White/White Light), Manual Lens Focal Length 5.0 - 25.0 mm (approx. 28 - 140 mm in 35 mm format equivalent) Maximum Aperture F3.5 (W) - F5.5 (T) Lens Construction 11 elements in 9 groups (5 aspherical elements) Zoom Type Electrically driven Optical Zoom 5x Intelligent Zoom 6/ : approx. 7.5x, f/ :approx. 8.9x, h: approx. 11.3x, h: approx. 12x, l: approx. 22.5x, m: approx.
Pet Detection Detectable number of pets: 1 Shooting Mode Auto Picture, Program, HDR, Handheld Night Snap, Movie, Underwater, Underwater Movie, Digital Microscope, Landscape, Flower, Portrait, Interval Shot, Interval Movie, High Speed Movie, Digital SR, Surf & Snow, Kids, Pet, Sport, Night Scene, Night Scene Portrait, Fireworks, Food, Report, Green Digital Filter B&W/Sepia, Toy Camera, Retro, Color (red, pink, purple, blue, green, yellow), Extract Color (red, green, blue), Color Emphasis (Sky Blue, Fres
54 Impact Resistance Rating Our drop test (1.6 m height onto a 5 cm thick plywood surface) complying with MIL-Standard 810F Method 516.5-Shock testing. * Waterproof performance is not guaranteed if the camera is exposed to impact such as being dropped or hit. * The camera is not guaranteed to be free of trouble or damages under every condition. Dimensions Approx. 122.5 (W) x 61.5 (H) x 29.5 (D) mm (approx. 4.8 (W) x 2.4 (H) x 1.2 (D) inches) (excluding operating or protruding parts) Weight Approx.
Warranty Policy All our cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from the date of your purchase.
For customers in USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Declaration of Conformity According to 47CFR, Parts 2 and 15 for Class B Personal Computers and Peripherals We: RICOH IMAGING AMERICAS CORPORATION Located at: 5 Dedrick Place, West Caldwell, New Jersey 07006, U.S.A. Phone: 800-877-0155 Declare under sole responsibility that the product identified herein complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards.
Information for Users on Collection and Disposal of Old Equipment and Used Batteries 1. In the European Union These symbols on the products, packaging and/or accompanying documents mean that used electrical and electronic equipment and batteries should not be mixed with general household waste. Used electrical/electronic equipment and batteries must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of these products.
Information on the Operating Manual An Operating Manual (PDF) containing information on how to use this camera is available. Please download it from our website. Operating Manual Download: http://www.ricoh-imaging.com/manuals/ Regarding User Registration In order to better serve you, we request that you complete the user registration, which can be found on our website. Thank you for your cooperation. http://www.ricoh-imaging.
Memo
e_kb601_StartGuide_EN.book Page 2 Thursday, August 9, 2018 10:28 AM Thank you for purchasing this RICOH WG-60 Digital Camera. This Start Guide provides information on how to get your RICOH WG-60 ready for use and its basic operations. To ensure proper operation, please read this Start Guide before using the camera. For details on how to use the various shooting methods and settings, please refer to the Operating Manual (PDF) posted on our website. Refer to p.59 for details on the Operating Manual.
e_kb601_StartGuide_EN.book Page 1 Thursday, August 9, 2018 10:28 AM RICOH IMAGING COMPANY, LTD. 1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN (http://www.ricoh-imaging.co.jp) RICOH IMAGING EUROPE Parc Tertiaire SILIC 7-9, avenue Robert Schuman S.A.S. B.P. 70102, 94513 Rungis Cedex, FRANCE (http://www.ricoh-imaging.eu) RICOH IMAGING 5 Dedrick Place, West Caldwell, New Jersey 07006, AMERICAS CORPORATION U.S.A. (http://www.us.ricoh-imaging.
