Model No.
PLEASE NOTE: The purpose of this manual is to ensure that the user can use this product correctly, and to avoid danger or damage to the product during operation. Please read this manual carefully before using the product and keep it for future reference. Without written permission, no entity or individual is allowed to extract, copy, translate or modify all or part of this manual in any way. Unless otherwise agreed upon, the company does not provide any express or implied statement or guarantee.
1.About AATSS model V3 The V3 is designed for easy integration into your local area network and existing access control systems. Combining high-precision infrared temperature detection with face recognition technology and a full suite of software functions, the AATSS V3 is the ultimate all-in-one solution for swift fully-automated contactless temperature screening. In the Health Questionnaire Mode, you can use your smartphone/ tablet finish the questionnaire and get a complete QR code.
2.Table Stand installation 2.1. Slip the V3 interface cables through the center hole of the Stand Base. 2.2. Screw the V3 mount into the base stand and secure it from the bottom using the helix nut provided. The mount is meant to be screwed in, not forced in directly.
2.3. Connect the Ethernet and Power Cable to the Stand Base connectors. 2.4.
3.Display Pedestal Installationn If you ordered a Display Pedestal, the installation method is very similar to the Table Stand.
3.1 Open the stand base and use the screwdriver to remove the backside cover. 3.2 Slip the V3 interface cables through the center hole of the Stand Base.
3.3 Pass all the data interface cables through the hole in the stand backside cover. 3.4 Connect the USB, Ethernet, and Power Cable to the Stand Base connectors.
3.5 Screw the V3 mount into the base stand and secure it from the bottom using the helix nut provided. The mount is meant to be screwed in, not forced in directly. 3.6 Secure the backside cover using screws.
3.7 Upon completing installation, adjust the screen to the side with the blue light bar. 3.8 Power Adaptor Connection and Ethernet Connection Connect the power supply to the base of the stand. The system will start automatically after powering on, the boot time is about 30 - 40 seconds. If you need to manage the V3 through a network, connect the base to your router via an ethernet cable. For instructions on how to set up the network, please refer to the following Software section.
4. About V3 QR Kiosk model The V3 QR Kiosk is designed for easy integration into your local area network and existing access control systems. Combining high-precision infrared temperature detection with face recognition technology and a full suite of software functions, the V3 QR Kiosk is the ultimate all-in-one solution for swift fully-automated contactless temperature screening. In the Health Questionnaire Mode, you can use your smartphone/ tablet finish the questionnaire and get a complete QR code.
4.1 Install the stand base and the column 4.1.1 Open the back cover of the column 4.1.
4.1.3 Tighten the stand base 4.1.
4.1.
4.2 Paper Installation ATTENTION: When device shows “OUT OF PAPER.PLEASE CHECK AND ADD PAPER”, you need to check and add paper. 4.2.1 Press the printer button 4.2.
4.2.3 Close the printer cover 4.2.
4.3 QR Code Reading and Temperature Scanning 4.3.1 Put the complete QR code in front of the QR code reading area 4.3.2 After validating the QR code, you can stand in front of the device to start temperature screening.
4.3.3 The printer prints a badge after the scanning 4.4. Software To keep your device updated, please visit www.richtech-ai.com/resources to get the latest software, user manual, and setup tutorial video.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
www.richtech-ai.com service@richtech-ai.