Data Sheet

ManualsBrandsRichlink ManualsElectronicsBLE 5.0 Module

Richlink Technology Corp.

RL62M01A BLE Module Datasheet

RL62M01A

Bluetooth

Low Energy Module

◼ INTRODUCTION

RL62M01A is an ultra-low-power SoC module for Bluetooth® 5.0 low energy

applications that combines the excellent performance of a leading RF transceiver with

a low-power ARM® Cortex-M4F. RL62M01A supports transport mode that user can

easily develop BLE related applications. The RL62M01A also supports piconet which

can connect one smart phone and three peripheral devices or connect 4 peripheral

devices at the same time.

◼ FEATURES

⚫ Bluetooth® Core Spec v5.0 compliant

⚫ Supports 2Mbps LE, LE advertising extension and LE long range

⚫ Supports GAP, ATT/GATT, SMP, L2CAP

⚫ Supports OTA (Over-the-Air) for firmware upgrade

⚫ Battery Supply Voltage 1.8V to 3.6V

⚫ Operational Temperature -20°C to +65°C

⚫ Current Consumptions

Power Down Mode 450nA (Typ.)

Deep LPS (with 160K SRAM retention) Mode 2.5 – 2uA (Typ.)

TX Mode (+0dBm) 8.5 mA (Typ.)

TX Mode (+4dBm) 10.5 mA (Typ.)

TX Mode (+8dBm) 12.8 mA (Typ.)

RX Mode 6.7 mA (Typ.)

⚫ Radio Bluetooth® Qualification (End Product, QDID: TBD)

⚫ Meets Radio Certification FCC, RED, KCC and MIC Japan

⚫ Dimension 11.05mm(W) x 17mm(L) x 2.05mm(H)

⚫ Pb Free, RoHS Compliant

Summary of content (15 pages)

PAGE 1
Richlink Technology Corp. RL62M01A BLE Module Datasheet RL62M01A Bluetooth® Low Energy Module ◼ INTRODUCTION RL62M01A is an ultra-low-power SoC module for Bluetooth® 5.0 low energy applications that combines the excellent performance of a leading RF transceiver with a low-power ARM® Cortex-M4F. RL62M01A supports transport mode that user can easily develop BLE related applications.
PAGE 2
Richlink Technology Corp. RL62M01A BLE Module Datasheet ◼ REVERSION HISTORY Version Code 0.1 BETA Date Descriptions 23-JUL-20 Preliminary release Copyright © 2020 Richlink Technology Corp. All rights reserved.
PAGE 3
Richlink Technology Corp. RL62M01A BLE Module Datasheet ◼ MODULE SPECIFICATIONS Specification Name Descriptions Module Dimension 11.05mm(W) x 17mm(L) x 2.05mm(H) BLE Core Compliant V5.0 Operation Distance Up to 50 Meters (*LE 1M, apple to apple testing results) Power Supply 1.8V – 3.6V Power Down Mode 450nA Power Consumption Deep LPS 2.5uA TX mode (+0dBm) 8.4mA TX mode (+4dBm) 10.4mA TX mode (+8dBm) 12.7mA RX mode 6.
PAGE 4
Richlink Technology Corp. RL62M01A BLE Module Datasheet ◼ PIN ASSIGNMENTS (TOP VIEW) GND 1 HW_RST_N 2 13 GND VBAT 3 12 P2_7 P0_3 4 11 P2_6 P3_1 5 10 P2_5 P3_0 6 9 P2_4 P1_0 7 8 P2_3 P1_1 8 7 P2_2 ◼ PIN DEFINITIONS Note: INOUT (digital bidirectional), ANA(analog pin), DIG(digital pin). # Pin Name I/O Ana/Dig Function 1 GND - GND GND 2 HW_RST_N IN DIG Hardware reset pin; low active; 3 VBAT - PWR Power Supply, 1.8V to 3.
PAGE 5
Richlink Technology Corp.
PAGE 6
Richlink Technology Corp. RL62M01A BLE Module Datasheet ◼ INTERFACE DESCRIPTIONS ⚫ UART RL62M01A provides multiple UART baud-rate. The common baud-rate is shown in below table. The UART clock error between two devices should be less than +/2.5%. RL62M01A UART Features: ➢ Supports 7/8 data format. ➢ 1/2 bit stop bit. ➢ ➢ ➢ ➢ Configurable parity bit: odd/even. Programmable baud rate (maximum baud rate=4Mbps). Support hardware flow control. RX line idle state detect. ➢ DMA supported.
PAGE 7
Richlink Technology Corp. RL62M01A BLE Module Datasheet ◼ ELECTRICAL CHARACTERISTICS ⚫ Temperature Limit Ratings Parameter Description Note Min. Typ. Max. Unit TSTORE Storage temperature -45 100 °C TAOP Operational Temperature -20 65 °C ⚫ Power Supply DC Characteristics Parameter Description VBAT Supply Voltage Note Min. Typ. Max. Unit 1.8 3 3.6 V ⚫ ESD Characteristics Parameter Description Note Min. Typ. Max.
PAGE 8
Richlink Technology Corp. RL62M01A BLE Module Datasheet ADCR_IN Input Impedance ADCC_Sample Input Impedance Bypass mode 10M Ohm Resistor divider mode (1/4) 500k Ohm Bypass mode 1.9 pF Resistor divider mode (1/4) 1.9 pF ⚫ Radio Characteristics General Radio Characteristics Parameter Description FRANGE Frequency range Note Min. Typ. Max. Unit 2402 2480 MHz RX Performance Condition: VBAT=3V, ambient temperature=25°C Parameter Description Note Min.
PAGE 9
Richlink Technology Corp. RL62M01A BLE Module Datasheet PERMAX Max PER report integrity Wanted signal= -30dBm 50% - Wanted signal f(0) = -64dBm PRX_IMD Max Intermodulation level Worst intermodulation level @2f1-f2=f0, |f1-f2|=n MHz, -50 dBm n=3,4,5… TX Performance Condition: VBAT=3V, ambient temperature=25°C Parameter Description PTX_MAX Maximum output power Adjacent channel power ratio (LE 1M) PTX_ADJ Adjacent channel power ratio (LE 2M) Note Min. Typ. Max.
PAGE 10
Richlink Technology Corp. RL62M01A BLE Module Datasheet ⚫ Digital I/O Pin DC Characteristics Condition: ambient temperature=25°C Parameter Description VIH33 Input high voltage VIL33 Input low voltage VOH33 Output high voltage VOL33 Note Min. 2 Typ. Max. Unit 3.3 3.6 V 0 0.9 V 2.97 3.3 V Output low voltage 0 0.33 V VIH28 Input high voltage 1.8 2.8 3.1 V VIL28 Input low voltage 0 0.8 V VOH28 Output high voltage VOL28 Output low voltage VDDIO=3.3V VDDIO=2.8V 2.
PAGE 11
Richlink Technology Corp. RL62M01A BLE Module Datasheet Boot up by HW_RST_N pin, power on timing is shown in below figure. TVBAT_RISE < 540us @VBAT=1.8V TVBAT_RISE < 1ms @VBAT=3.3V VBAT, VDDIO TRST > 200s TPOR2VDDCORE > 7msec (typical: 18msec) HW_RST_N VDDCORE TPOR2VXTAL > 12msec (typical: 32msec) 40MHz XTAL ⚫ UART Characteristics TD_RTS End of STOP BIT RTS_OUT UART_RX_IN End of STOP BIT CTS_IN UART_TX_OUT TD_CTS Parameter TD_RTS TD_CTS TSET_CTS Description TSET_CTS Note Min. Typ. Max.
PAGE 12
Richlink Technology Corp. RL62M01A BLE Module Datasheet ◼ PCB LAYOUT GUIDE > 6.0mm > 12.0mm Mother Board Edge > 5.2mm Metal exclusion zone to edge of board Module GND Plane Edge No metal, no any layer accept Module Placement Example: Copper clearance area Copyright © 2020 Richlink Technology Corp. All rights reserved.
PAGE 13
Richlink Technology Corp. RL62M01A BLE Module Datasheet ◼ MODULE DIMENTIONS 8.11mm 1.2mm 11.81mm 1.27mm A P1.27x7=9.19mm 1.27mm 1.27mm GND Plane Boundary 0.7 mm Detail A (3:1) 6.84mm Positioning Hole 3.81mm P1.27x8=10.26mm 17.0mm 1.64mm Positioning Hole 11.05mm 0.8mm Shielding Case 17.0mm Side View Copyright © 2020 Richlink Technology Corp. All rights reserved. 2.1mm 1.
PAGE 14
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 15
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or colocation with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization.