User's Manual

Waterproof Bluetooth Speaker
Model Number : S5
Charging The Bluetooth Speaker
1. Open the rubber seal cover on the side. Charging time 3 hours.
2. Connect the Bluetooth Speaker’s Micro USB socket with the Computer’s USB port through
USB cable.
3. The Charging LED will turn ON in red light; the rechargeable battery is in charging.
4. The Charging LED red light will turn OFF when the rechargeable battery is fully charged.
5. Disconnect the USB cable, and close the Rubber Seal Cover when it is done.
Bluetooth Speaker Pairing / Reconnecting
1. Press the button for 3 seconds, Mode LED will blink alternately in blue and red; the
device is turned ON and goes into searching / paring / reconnect mode for pair.
2. Now, turn ON the Bluetooth function on your mobile phone.
3. Search for “S5” and select it to pair.
The Bluetooth Speaker will be reconnecting automatically if your mobile phone has been
paired. (Depend on the of mobile phone’s type and configuration, manual reconnection
may require on some devices)
4. If pairing is successful, Mode LED light will switch to slow blink in blue (once per 3
seconds).
5. Press the
button for 3 seconds to turn OFF the Bluetooth Speaker.
Note: If can’t search Speaker, means the last mobile phone is reconnecting automatically

Summary of content (3 pages)