USER MANUAL PRODUCT DESCRIPTION A Wirele s Meter nk mart Oil T S a s T-METER
01 DOWNLOAD APP First, Download the T-MATER on your smartphone through Google play or APP store T-METER You can also download it by scanning the QR code Support IOS and Andriod
02 ADD YOUR T-METER SENSOR Tap these add buttons,and follow the steps to add your T-meter sensor
03 TURN ON THE T-METER SENSOR Open the sensor cap by rotating it,Then move the battery switch to the “ON” position.
04 SELECT THE HOME WIFI: T-Meter needs to connect to your home network, please make sure your home network is available, and T-Meter only supports 2.4GHz network, please do not try to connect with 5GHz network. 2.
05 After the battery is turned on for 10 seconds, Press the configuration button 3 times within 3 seconds to set the T-Meter sensor to "waiting for connection mode" (the indicator light starts to flash) indicator light ON/OFF switch configuration button
06 INSTALLATION INSTRUCTIONS Install the T-Meter sensor on the oil tank. Do not install the T-Meter sensor on the extended oil pipe on the oil tank.
07 CONFIGURE THE HOME WIFI After the T-Meter sensor is successfully added, you can check the oil level in your tank and the oil usage of your family through T-meter APP.
ADD T-METER SENSOR FAILED? 1. Please confirm that your WiFi password is correct. 2. Please make sure you are on a 2.4GHz network. 3. Please make sure that your home network is an available WIFI, and has a strong signal. 4. Make sure that you press the configuration button 3 times as required (within 3 seconds) to keep the sensor in “waiting for connection mode”(the indicator light starts to flash) If you have any other questions, please contact us:Service@tumblevd.