Operation Instructions

Table Of Contents

910805

INSTRUCTIONS FOR OPERATION

SETING THE OPERATING CONTROLS

1. This unit operates on a 3 volts battery (not included).

To prevent possible damage if the battery should leak , be sure to remove

the battery when the unit is not use .

2. Store the controller away from excess heat or humidity .

3. This remote control unit is required with 24bit code combinations. To prevent

possible interference from or to other remote units such as garage door

openers, car alarm or security system .

4. Operation buttons on the panel of transmitter .

FAN SPEED button – fan speed(speed 1~6)

( 6 ~1)

REV button – Fan reverse Warm weather/Cool weather

LIGHT button - Light ON/OFF or Dimmer

FAN OFF button - FAN OFF

CONTROL

SWITCH – For light

brightness and ON/OFF

control .

5. Start the fan

Press the FAN speed button .

PAGE 1
INSTRUCTIONS FOR OPERATION SETING THE OPERATING CONTROLS 1. This unit operates on a 3 volts battery (not included). To prevent possible damage if the battery should leak , be sure to remove the battery when the unit is not use . 2. Store the controller away from excess heat or humidity . 3. This remote control unit is required with 24bit code combinations. To prevent possible interference from or to other remote units such as garage door openers, car alarm or security system . 4.
PAGE 2
6. Turn off the fan : Press the OFF button . 7. Light control : Turn the light on or off by only touching the LIGHT CONTROL button . Keep pressing the button in excess of 0.7 second it becomes a dimmer , the light varies cyclically in 0.8 second . GENERAL INFORMATION : This REMOTE controller is designed to separately control your ceiling fan speed and light brightness . The Light ON/OFF button will control the light brightness ON/OFF .