DSPbR Series – User’s Manual Figure 15 – DSPbR Dimensions Left Hand Side View Figure 16 – DSPbR Dimensions Right Hand Side Document Number 00000.
DSPbR Series – User’s Manual Figure 17 – DSPbR Dimensions Top View The DSPbR is designed to be mounted within a 19-inch rack frame within an indoor environment. Although the mechanical strength of the DSPbR sub rack frame is robust enough to contend with a maximum “all up” module load, any additional weight bearing adjustable mechanical supports such as angle brackets extending between the 19-inch front mounting frame and a rear frame would add strength to the support.
DSPbR Series – User’s Manual At maximum fan speed, which equates to the internal temperature edging up to +70 deg C, the fans will be running at full speed. This equates to an airflow volume for both fans of 880 cubic meters of air in an hour (equating to around 0.25 cubic meters in a second). Ensure unrestricted airflow to reducing differentiating high and low air pressure zones. Both fans have front panel accessible dust filters, which will require periodic cleaning.
DSPbR Series – User’s Manual Figure 18 – Sub Rack Frame M6 Earthing Stud Connect an earth bonding cable with a minimum cross section of 16mm² terminated with the appropriate crimped lug for the 6mm stud and 16mm² copper cable. The 16mm² cable must be identifiable by the green and yellow coloured PE sheath. Loosen the Hex nut, connect the cable-crimped lug between the two washers and fasten.
DSPbR Series – User’s Manual Figure 19 – AC Mains IEC320-C19 Plug and Socket Figure 20 – DC Cable Termination Connector Phoenix HDFK 16A The AC mains IEC320-C19 socket rating is 15 Amps, which is used for the full AC input range from 110V to 240V. Two industry standard AC mains power cord options are available with the DSPbR. For the Australian market a 2.5 metre cord fitted with a 15 Amp mains plug is provided. For the US market a 2.5 metre cord with a 15 Amp rated 5-15P mains plug is provided.
