Installation Guide

ManualsBrandsRF Technologies ManualsElectronics3D-iD Asset Locating Tag

FCC Application for PinPoint – Tag Manual •

••

• FCC ID: OGK30011662001 •

••

• Report No. EA0440-1

22-Mar-00

Page

1 of 6

______________________________________________________________________

7.0 Tag Manual:

3D-iD Hardware Installation and Maintenance Manual

PinPoint Local Positioning Systems.

Information in this document is subject to change without notice. No part of this document may

be reproduced or transmitted in any form or by any means without the express written

permission of the PinPoint Corporation.

#3000-11602-001

Printed in the United States

PinPoint and L

RF are trademarks of PinPoint Corporation. 3D-iD is registered. All other

trademarks are the properties of their respective owners.

The devices discussed in this manual comply with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference that may

cause undesired operation. Changes and modifications not expressly approved by PinPoint

Corporation could void the user’s authority to operate the equipment.

2 PinPoint Local Positioning Systems

Part #: 3000-11602-001

TABLE OF CONTENTS

About 3D-iD 5

Antenna Installation and Maintenance 7

Warnings 8

Included in the Antenna Package 9

Antenna Placement Tips 10

Mounting the Antenna 11

Positioning the Antenna 12

Technical Specification 13

Cell Controller Installation and

Maintenance 15

Warnings 16

Included in the Cell Controller package 16

Cell Controller Placement 17

Mounting the Cell Controller 18

Installing the Cell Controller 19

Maintaining the Cell Controller 21

Technical Specifications 22

Coaxial Cable Installation 23

Warnings 24

Included in the Coaxial Cable package 24

Installing Coaxial Cables 25

Technical Specifications 26

Tag Installation and Maintenance 27

Warnings 28

Included in the Tag Package 29

Mounting Tags - Asset Mount 30

Mounting to a flat surface 30

Mounting to a curved surface 31

Mounting Tags - Personnel Mount 33

Maintaining the Tag 34

Technical Specifications 36

3.Symbols used in this manual

This is a warning symbol. This highlights text that concerns safety and other major issues.

This is a note symbol. This highlights text that contains information that might not be

obvious and deserves attention. This is the warranty symbol. It highlights actions that will

void your warranty.

Summary of content (6 pages)

PAGE 1
FCC Application for PinPoint – Tag Manual • FCC ID: OGK30011662001 • Report No. EA0440-1 Page 1 of 6 22-Mar-00 ______________________________________________________________________ 7.0 Tag Manual: © Copyright 2000, PinPoint Corporation. All rights reserved. 3D-iD Hardware Installation and Maintenance Manual PinPoint Local Positioning Systems. Information in this document is subject to change without notice.
PAGE 2
FCC Application for PinPoint – Tag Manual • FCC ID: OGK30011662001 • Report No. EA0440-1 Page 2 of 6 22-Mar-00 ______________________________________________________________________ 4 PinPoint Local Positioning Systems About 3D-iD 3D-iD is the world's first Local Positioning System (LPS). The system allows end-users the ability to locate, track, and secure their inventory or valuable assets. The hardware system uses Cell Controllers to continually track PinPoint's tags in real-time.
PAGE 3
FCC Application for PinPoint – Tag Manual • FCC ID: OGK30011662001 • Report No. EA0440-1 Page 3 of 6 22-Mar-00 ______________________________________________________________________ Mounting the Antenna The Antenna mount is intended for flat walls of varying construction. Please contact your certified 3D-iD system integrator for other mounting applications. 1. Using the appropriate hardware, securely attach the circular baseplate of the mount to a flat surface in the desired location.
PAGE 4
FCC Application for PinPoint – Tag Manual • FCC ID: OGK30011662001 • Report No. EA0440-1 Page 4 of 6 22-Mar-00 ______________________________________________________________________ 18 PinPoint Local Positioning Systems Installing the Cell Controller 1. Attach the enclosed power cord to the AC outlet on the Cell Controller. Plug the power cord into a grounded wall outlet. Ensure the outlet is not overloaded. 2. Attach the appropriate network cable (ethernet) to the Cell Controller. 3.
PAGE 5
FCC Application for PinPoint – Tag Manual • FCC ID: OGK30011662001 • Report No. EA0440-1 Page 5 of 6 22-Mar-00 ______________________________________________________________________ 4. Connect the SMA connectors of the Coaxial Cable to the Antenna and the Cell Controller, only after they are both mounted. Do not overtighten the cable connections (max. 8 inch-lbs.) 25.Technical Specifications Length: 100 feet Weight: 2.8 lbs Temperature: 5°C to 35°C (operating range) Min. Bend Radius: 0.
PAGE 6
FCC Application for PinPoint – Tag Manual • FCC ID: OGK30011662001 • Report No. EA0440-1 Page 6 of 6 22-Mar-00 ______________________________________________________________________ Mounting Tags - Personnel Mount Personnel Mounts are designed to enable a Tag to be worn around the neck or on a pocket. 1. 2. 3. Attach the ID Clip to the Tag as shown. Insert the clip plug into the gap behind the clip. Be sure it is snug.