SATELLITE TV OPERATION / TECHNICAL MANUAL 22 Sep.
The Eagle Manual 2
The Eagle Manual I ndex Warnings ....................... 4 Mount Definitions ........................ 5 Controller Views ....................... 6 Configuration and Software Versions ....................... 8 Menus and Operations ....................... 9 Connector Wiring Diagram ....................... 11 Raising the ODU Using a 12 VDC Source ....................... 11 SWM DirecTV Block Diagram ....................... 12 Foot Print and Clearances .......................
The Eagle Manual WARNING Double check all electrical and coax connections from the controller to the mount and LNB's BEFORE applying power to, or connecting the satellite receiver to the controller. Note: Thecontrol cable has 12 wires that control motors, provides GPS information and sensor feedback. If a control cable connector is miss wired it can cause damage to GPS or sensors.
The Eagle Manual M ount definitions A system consists of several components MOUNT (ODU) Reflector/Parabola Stow Brackets Note: Your LNB may vary from the one pictured depending upon your system configuration. Mount or Azimuth Base LNB Arm Assembly Connector Weather Cover Mounting Feet Items included with the system and are not shown.
The Eagle Manual C ontroller Views FRONT VIEW Definitions and Usage CONTROLLER (IDU) FIND Directs the system to "FIND" Satellites. Navigates through the menu and selects a particular function. STOW Directs the system to "STOW" the mount and prepare it for travel Navigates through the menu and selects a particular function. LCD Display Displays the actions of the system. USB Programming Port Used for upgrading firmware. POWER Will turn controller ON and OFF. Navigates through the Menu options.
The Eagle Manual REAR VIEW Definitions and Usage CONTROLLER (IDU) To REC To LNB CONNECTIONS POWER 12 VDC 7 amp (power supply provided). CONTROL CABLE CONNECTION: Termination of the 12 wires of the control cable to the controller takes place here. TO SATELLITE RECEIVER This is a coax pass-through connection to your satellite receiver (Satellite IN). It is optional except for DirecTV SWM. TO ODU LNB: This is a coax connection to the Antenna's LNB.
The Eagle Manual C onfigurations and Software Version Version Each of the Program Providers will require different software EAGLE -1 EAGLE -2 EAGLE -3 EAGLE -4 SHAW Direct = DirecTV SWM = Dish Network = Bell Express = 107.3, 107.3, 111.1 Satellites 99, 101, 103 Satellites 110, 119, 129 Satellites 81, 92 Satellites (For Canadian Use Only) (For Canadian Use Only) TO CONFIGURE Configuration of your system is done through software. There is a specific version of software for each Program Provider.
The Eagle Manual M enu Options Menus and Operation Your controller is menu driven. By selecting a particular menu you can perform many functions besides just "SEARCHING for satellite". TO SEARCH • Press the Power button o Displayed will be the.... System configuration (software configuration) • EAGLE 1 SHAW (Triple Satellite xKu LNB) • EAGLE 2 DIRECTV (SWM 3 LNB) (Triple Satellite 1000.2 LNB) • EAGLE 3 DISH NETWORK • EAGLE 4 BELL TV (Triple Satellite 1000.2 LNB) Version of software i.e. 14.02.
The Eagle Manual • • • • • • • 6: move skew - pressing and holding the appropriate button will manually move your dish in skew (Up arrow right side DOWN, Down arrow left side DOWN 7: test dish - will move the dish in all axis for one complete cycle 8: temperature - will display current operating temperature of its operating environment.
The Eagle Manual C onnector Wiring Diagram Wiring the 12 Pin Controller Connector RAISING THE ODU USING A 12 VDC SOURCE TO RAISE THE MOUNT WITH A BATTERY Touch the following wires from the control cable directly to a drill battery or any 12 VDC source and it will result in movement of the ODU. To reverse the direction, reverse the wires to your battery.
The Eagle Manual SWM Block Diagram INSET Note: The SWM LNB has 8 channels available. Each DVR takes 2 channels (one coax). A non DVR uses one channel (one coax). You may use any combination of receivers until you use up all 8 channels. Example: A HR34 uses 5 channels leaving 3 channels available. IDU Receiver line Note: See bottom of IDU for wiring instructions. 4 Port splitter shown.
The Eagle Manual F ootprint and Clearances 39 Inches 8 1/2 Inches 13 1/2 Inches Distance for installing LNB Landing Plate Rotational clearance from center rotation point is 18 inches when dish is elevated and rotating. This is a safety zone.
The Eagle Manual R eturning Parts Parts to the Factory Factory Parts returned to the factory must contain a Return Material Authorization (RMA) which will be provided by the RF Mogul Technical Support Department at the time of troubleshooting. This will ensure proper accountability of returned equipment or parts. Make sure that the following information is contained on your shipment.
