EXHIBIT 4 User Manual fhm % HH CHIS HEIR GROUP RF-LINK SYSTEMS INC. FCC ID.
Table of contents PACKAGE CONTENTS. INSTALLING YOUR WIRELESS 3D MOUSE. HARDWARE INSTALLATION SOFTWARE INSTALLATION... USING THE WIRELESS 3D NOUS) FREEDOM OF MOVEMENT WITHOUT CABLE POWER SAVING OPERATION MOUSE CONTROL PANEL.
TX Fact: MIpfryvae) Lx Feet D: MIPS ff 50202 INSTRUCTION MANUAL CLASS B COMPUTING DEVICES Use the provided shielded power supply cable so as not to interfere with radio and television reception. Also a shielded interface data cable nuts be used for video output port, parallel output port and serial output port to avoid causing Radio-TV interference Problems. If you use other cables, it may causes interference with radio and television reception.
Package contents "The Wireless 3D Mouse package should contain: One 3D Mouse (Transmitter Unit) One Receiver Unit One stand for the receiver One Wireless 3D Mouse Software Setup Disk This User's Martial il Wireless 3D Mouse
rr ‘Thank you for purchasing the RF-Link's Wireless 3D Mouse. The Wireless 3D Mouse uses the latest in wireless radio technology for convenient cordless mouse operation on any standard personal computer in the office or at home. Through radio wireless technology, the Wireless 3D Mouse can be used from any direction or angle at a distance of up to three meters, making surfing the Internet easier than ever. The special “Wheel” feature allows for rapid and easy scrolling when working with dong documents.
g to know your Wireless 3D Mouse Receiver Antenna LED Channel Button Stand Front View Mouse Whee! Button Channel Button Side View Bottom View 2 Wireless 3D Maude
Your Wireless 3D Mouse install Hardware Installation Installing batteries in the mouse (transmitter unit) 1. Remove the battery cover on the bottom of the Wireless 3D Mouse 2. Insert two AAA batteries into the battery compartment 3. Carefully replace the cover Connecting the receiver unit io a PS/2 port 1. Tun off the computer before inserting the connector to the PS/2 port Caution: Connecting and disconnecting cables while the computer is running may damage the mouse port and/or the computer. 2.
Using the Wireless 3D Mouse Freedom of movement without cable “The reliable Radio Frequency (RF) technology of the Wireless 3 Mouse allows you to move the mouse freely. You can use the Wireless 3D Mouse unto three meters away from the receiver uni, enjoying full wireless convenience from any direction or angle, Power saving operation To save battery life, the Wireless 3D Mouse will automatically shut off if the mouse is not moved or pressed within 5 minutes.
Figure 2 Auto Scroll ato scroll enables you to sit back while your document/ Web page etc. auto scrolls at the speed you like. To use the auto scroll function the “Quick Scroll, Auto Scroll Control” check box must be checked (Figure 3). Click anywhere in the document with the wheel button, Move the mouse up, down, ar sideways to begin ano scrolling, The distance you move the mouse from the mitral click poi will determine the scrolling speed.
Figure 4 Quick Scroll Quick Scroll allows fast scrolling through your document. _ Resting the strolling Axis to Initial permits fast Scrolling in one axis only, Place the mouse pointer in the document and click the wheel once. Hold down the wheel and move either up, down, or sideways. If you move up or down then you need to release the wheel and click it again before you can move sideways. Predominant provides four-way scrolling without releasing the wheel (Figure 6).
Figure 6 ® The Middle mouse “Click” function can be assigned from the drop-down List next to the Burton Action check box. (See Figure 7) Figure 7 Simultaneous multi-user operation in the same office or room Through the use of multi-channel radio technology, as many as eight users may use a Wireless 3D Mouse at the same time and in the same room or office.
® Pressing the Channel button on the receiver unit of the bottom of mouse sell change the radio channel. Tf the Channel button is pressed, the LED on the receiver or the bottom of the mouse will flash to indicate the Chan bummer (Bi gore 8). Le, 3 Hashes equals channel 3, Pressing the button for longer than one second will reset the unit to chad 1.
Troubleshooting If the Wireless 3D Mouse does not work after installing hardware and software Try the following: ® Check their the connector of the receiver unit is inserted securely into the PS/2 port ® Make sure the two AAA batteries have been inserted correctly ® Make sure the Wireless 3D Mouse is used within three meters of the receiver unit. In some cases, the electromagnetic emissions from your computer may affect the wireless operation.
stem Spe LE Radio Frequency S00MHz Channel Number 8 Operation Range 3 meters Radio Data Rats 9600bps Resolution 400 P} Interface P$/2 mouse port Battery Life & Months 10 Wireless 3D Mouse