page Español Visión General Qué hay en la Caja Resumen de la Cámara Instalación Operación Básica 68 69 70 72 77 Deutsch Übersicht Verpackungsinhalt Kamera übersicht Installation Grundbedienung 84 85 86 88 93 3
3. Camera Overview 1. 2. 3. 4. 5. 6. 10. 11. 12. 13. 8. 9. 7. Micro SD Card Slot Power Button Reset Button Menu Button Mode Button REC (Record) Button * 2. &RQ LUP %XWWRQ MIC (Microphone) Button *** Screen Button Mini-USB Port GPS Logger Port Rear Camera Port Lens Angle Adjustment 7KH &DPHUD LV UHFRUGLQJ ZKHQ WKH /(' LV ȵDVKLQJ UHG 7KH &DPHUD LV UHFRUGLQJ ZKHQ WKH /(' LV ȵDVKLQJ UHG 7KH GHYLFH FKDUJLQJ or powered on when the LED is solid blue.
Connect MiniUSB to the camera Blue LED lights indicate the device is charging or powered
Step 4: Mount the Rear Camera Mount the rear camera as shown below. Use the provided rear camera cable to connect the rear camera to the front camera.
Step 5: Installing the Camera onto the Windshield Place the camera on the mount and carefully route the power cable around the windscreen and tuck in under the trim. Plug the Car Charger Cable into a 12V DC power outlet or the car cigarette lighter. Connect car charger to the camera. The camera will auto-start recording once powered on.
5. Basic Operation Device Power The device is automatically powered on when plugged into a 12V accessory socket or cigarette lighter and receives a charge (i.e.: the vehicle is started.) To turn the device on manually,press and hold the 32:(5 button until the welcome screen appears. The camera will automatically start recording when powered on.
Menu Settings Power the camera on. If the camera is recording, press the REC button to stop recording. Press the 02'( button and toggle to the desired mode. Press the 0(18 button once to enter the settings menu for a Mode. Press the MENU button twice to enter the System Settings.
Video Recording The camera will automatically start recording when the device receives a charge. The LED lights and the red dot will blink when the device is recording. Press the 5(& button to stop recording. The camera automatically start recording when powered on Video Playback Playback mode Playback of videos can be done on the device or a computer. Also, if you have purchased a Rexing GPS Logger you may play back the recordings in a specialized application. 7R SOD\EDFN D YLGHR RQ WKH to the G
During playback use the 2. (pause), 0Ζ& (fast forward) and 5(& (rewind) buttons to control the video playback. To playback a video on the computer either use an SD card adapter or connect the device to the computer directly using the USB to Mini B 5pin male cable. To playback a video using an SD card adapter, remove the memory card and insert it into an SD card adapter. Place the adapter in the computer. To playback a video using USB cable, connect the USB Cable to the device and the computer.
Parking Monitor Connect the dash cam to the smart hardware kit to activate the parking monitor function (Need to purchase the smart hardware kit separately). Please visit support.rexingusa.com to watch a video tutorial. Wi-Fi Connect Download “Rexing Connect” app from the App Store/Google Play Store. To access or exit the Wi-Fi feature, hold down 2.. Open Wi-Fi settings on your SKRQH LQG Ȋ66Ζ' % B ;;;;ȋ from the list, tap to connect.
GPS Logger (Need to purchase separately) When connected to the camera, it will record the speed and location of your vehicle as you drive. GPS Signal (not connected) You can then access this information while playing back your recordings using the GPS Video player (For Windows and Mac, available at rexingusa.com). Press the 0(18 button twice and enter the System Settings. Toggle to the GPS Speed Unit setting and select your preferred speed unit.
写真を撮る 写真を撮るためには、ビデオ 録画を停止し、写真モードに 切り替えます。 [OK] ボタンを押して写真を 撮ります。 再生モード に切り替え て、 プレビュ ーする写真 を選びます 写真を表示するためには、ビ デオ録画を停止し、再生モー ドに切り替えます。 [REC] および [MIC] ボタンを 押して、写真を切り替えます。 写真を削除するには、ビデオ 録画を停止して再生モード に切り替え、削除したい写真 またはビデオに切り替えま す。 [Delete] ボ タンを選択 します MENU を 1 回押し、削除オプ ションを表示します。 [OK]ボタンを押して、[Delete Current (現在表示している 写真/ビデオを削除)] または [Delete All (すべて削除)] を 選択します。 削除オプシ ョンを選択 します 現在選択しているものを削除 全て削除 35
3. Aperçu de la Caméra 1. 2. 3. 4. 5. 6. 12. 13. 9. 7. 10. 11. 8. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Emplacement pour carte Micro SD Bouton Alimentation Bouton Réinitialisation Bouton Menu Bouton Mode Bouton REC* Bouton OK** Bouton MIC*** Bouton Ecran Port Mini-USB Port pour enregistreur GPS Port pour caméra arrière Réglage de l’angle d’objectif * La caméra enregistre lorsque la LED clignote en rouge. ** La caméra enregistre lorsque la LED clignote en rouge.
Connectez le Mini-USB à la caméra Le voyant LED bleu indique que l’appareil est en charge ou sous tension 0DLQWHQDQW YRXV SRXYH] YRXV G«FRQQHFWHU GH OȇDOLPHQWDWLRQ /D FDP«UD Vȇ«WHLQGUD DSUªV VHFRQGHV /D FDP«UD GHYUDLW commencer à enregistrer automatiquement la prochaine IRLV TXȇHOOH VHUD DOOXP«H Appuyez deux fois sur le bouton Menu Appuyez sur le bouton 2.
Étape 4 : Installez la caméra arrière Installez la caméra arrière comme indiqué ci-dessous. Utilisez le câble de caméra arrière fourni pour connecter la caméra arrière à la caméra avant.
Étape 5 : Installez la caméra sur le pare-brise Placez la caméra sur le support et passez soigneusement le câble d’alimentation autour du pare-brise et glissez-le sous la garniture. Branchez le câble du chargeur du véhicule sur une prise de courant 12 Vcc ou sur l’allume-cigare du véhicule. Connectez le chargeur du véhicule à la caméra. La caméra démarrera automatiquement l’enregistrement une fois qu’elle est allumée.
5. Opération basique Alimentation pour appareil L’appareil s’allume automatiquement lorsqu’il est branché à une prise accessoire 12V ou à un allume-cigare lorsqu’il est mis sous tension (c’est-à-dire : le véhicule est démarré). Pour allumer l’appareil manuellement, maintenez enfoncé le bouton Alimentation jusqu’à ce que l’écran d’accueil apparaisse. La caméra démarre lorsqu’elle est allumée.
Menu Réglage Allumez la caméra. Si la caméra enregistre, appuyez sur le bouton REC pour arrêter l’enregistrement. Appuyez sur le bouton MENU et passez au mode souhaité. Appuyez une fois sur le bouton MENU pour accéder au menu de réglage pour un mode. Appuyez deux fois sur le bouton MENU pour accéder au Réglage du système.
Enregistrement video La caméra démarre automatiquement l’enregistrement lorsque l’appareil est mis sous tension. Le voyant LED et le point rouge clignotent en rouge lorsque l’appareil enregistre. Appuyez sur le bouton REC pour arrêter l’enregistrement. La caméra démarre automatiquement l’enregistrement lorsque l’appareil s’allume. Lecture des enregistrées vidéos Mode Lecture La lecture des vidéos HQUHJLVWU«HV SHXW ¬WUH HHFWX«H sur l’appareil ou un ordinateur.
Pendant la lecture, utilisez les boutons OK (pause), MIC (avance rapide) et REC (recul rapide) pour contrôler la lecture vidéo. Pour lire une vidéo sur l’ordinateur, utilisez un adaptateur de carte SD ou connectez l’appareil à l’ordinateur directement à l’aide d’un câble USB. Pour lire une vidéo à l’aide d’un adaptateur de carte mémoire SD, retirez la carte mémoire et insérez-la dans un adaptateur de carte SD. Placez l’adaptateur dans l’ordinateur.
(vous devez acheter le kit de câblage intelligent séparément). Veuillez visiter support.rexingusa.com pour regarder un tutoriel vidéo. Connexion Wi-Fi Téléchargez l’application « Rexing Connect » depuis App Store/Google Play Store. 1. 2. 3. 4. Pour accéder ou quitter la fonction Wi-Fi, maintenez enfoncé le bouton REC. Ouvrez le réglage Wi-Fi sur votre téléphone, recherchez « SSID : B50—XXXX » dans la liste, appuyez sur la touche pour vous connecter.
Enregistreur GPS (Besoin d’acheter séparément) Lorsqu’il est connecté à la caméra, il enregistre la vitesse et l’emplacement de votre véhicule pendant que vous conduisez. Signal GPS (non connecté) Vous pouvez ensuite accéder à ces informations pendant la lecture de vos enregistrements à l’aide du lecteur vidéo GPS (pour Windows et Mac, disponible sur rexingusa.com). Appuyez deux fois sur le bouton MENU pour passer au Réglage du système.
Photographie Pour prendre une photo, arrêtez l’enregistrement vidéo et passez en mode Photo. Appuyez sur le bouton OK pour prendre une photo. Passez au mode Lecture et sélectionnez une photo à voir 3RXU DɝFKHU XQH SKRWR arrêtez l’enregistrement vidéo et passez en mode Lecture. Appuyez sur les boutons REC et MIC pour parcourir vos photos.
3. Descrizione Telecamera 1. 2. 3. 4. 5. 10. 11. 12. 13. 6. 8. 9. 7. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Slot per Scheda Micro SD Pulsante di Alimentazione Pulsante RESET Pulsante MENU Pulsante MODALITÀ Pulsante REC * Pulsante OK ** Pulsante MIC *** Pulsante SCHERMO Porta del Mini-USB Porta del Logger CPS Porta della Telecamera Posteriore Regolazione dell’angolo dell’obiettivo *La telecamera sta registrando quando il LED lampeggia in rosso.
Icone dello Schermo Modalità WDR (accesa) Segnale GPS (non connesso) Tempo di registrazione (calo attuale) Registrazione (accesa) Registrazione dello Stato di Attesa Tempo di Registrazione del Ciclo Valore di Esposizione Risoluzione video Modalità di Parcheggio (accesa) Livello di Sensibilità del Sensore G.
Connetti Mini-USB alla telecamera Le luci LED blu indicano che il dispositivo è in ricarica o acceso 2UD SXRL GLVFRQQHWWHUWL GDOOȇDOLPHQWD]LRQH /D WHOHFDPHUD VL VSHJQHU¢ GRSR VHFRQGL /D WHOHFDPHUD GRYUHEEH LQL]LDUH a registrare automaticamente la prossima volta che viene accesa.
Passo 4: Montare La Telecamera Posteriore Monta la telecamera posteriore come mostrato di seguito. Usa il cavo della telecamera posteriore in dotazione per connettere la telecamera posteriore alla telecamera anteriore.
Passo 5: Installare la Telecamera sul Parabrezza Posiziona la telecamera sul supporto e instrada attentamente LO FDYR GL DOLPHQWD]LRQH DWWRUQR DO SDUDEUH]]D H LQȴODOR VRWWR LO rivestimento. Collega il Cavo del Caricabatterie per Auto a una presa di corrente da 12 V CC o all’accendisigari dell’auto. Connetti il caricabatterie per auto alla telecamera. La telecamera avvierà automaticamente la registrazione una volta accesa.
5. Funzionamento Base Accensione del Dispositivo Il dispositivo si accenderà automaticamente quando collegato a una presa per accessori da 12 V o all’accendisigari e riceve una ricarica (ovvero: il veicolo viene avviato). Per accendere manualmente il dispositivo, premi e tieni SUHPXWR LO SXOVDQWH GL $&&(16Ζ21( ȴQR D TXDQGR DSSDUH OD schermata di benvenuto. La telecamera inizierà automaticamente a registrare quando è accesa.
Impostazioni Menu Accendi la telecamera. Se la telecamera sta registrando, premi il pulsante OK per interrompere la registrazione. Premi il pulsante MODALITÀ e passa alla modalità desiderata. Premi una volta il pulsante MENU per accedere al menu delle impostazioni per una Modalità. Premi due volte il pulsante MENU per accedere alle Impostazioni di Sistema.
Registrazione Video La telecamera avvierà automaticamente la registrazione quando il dispositivo riceve una ricarica. Le luci LED e il punto rosso lampeggeranno durante la registrazione. Premi il pulsante REC per interrompere la registrazione. La telecamera avvia automaticamente la registrazione all’accensione Riproduzione Video Modalità di riproduzione La riproduzione di video può essere eseguita sul dispositivo o su un computer.
Durante la riproduzione, usa i pulsanti OK (pausa), MIC (avanzamento rapido) e REC (riavvolgimento) per controllare la riproduzione del video. Per riprodurre un video sul computer, usa un adattatore per scheda SD o connetti il dispositivo al computer direttamente usando il cavo USB. Per riprodurre un video usando un adattatore per scheda SD, rimuovi la scheda di memoria e inseriscila in un adattatore per scheda SD. Posiziona l’adattatore nel computer.
Monitor di Parcheggio Connetti la dash cam al kit hardwire intelligente per attivare la funzione di monitore di parcheggio (È necessario acquistare il kit hardwire intelligente separatamente). Si prega di visitare support.rexingusa.com per guardare un video tutorial. Connessione Wi-Fi Scarica l’app “Rexing Connect” dall’App Store / Google Play Store. 1. Per accedere o uscire dalla funzione Wi-Fi, tieni premuto REC. 2.
GPS Logger (È necessario acquistare separatamente) Quando è connesso alla telecamera, registrerà la velocità e la posizione del tuo veicolo mentre guidi. Segnale GPS (non connesso) Puoi quindi accedere a queste informazioni durante la riproduzione delle tue registrazioni usando il lettore Video GPS (Per Windows e Mac, disponibile su rexingusa.com). Premi due volte il pulsante MENU e accedere alle Impostazioni di Sistema.
Scattare Foto Per scattare una foto, interrompi la registrazione video e passa alla Modalità di Foto. Premi il Pulsante OK per scattare una foto. Passa alla modalità di Riproduzione e seleziona una foto da visualizzare Per visualizzare una foto, interrompi la registrazione video e passa alla Modalità di Riproduzione. Premi i pulsanti di navigazione SU e GIÙ per passare da una foto all’altra.
3. Resumen de la Cámara 1. 2. 3. 4. 5. 10. 11. 12. 13. 6. 8. 9. 7. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Ranura para tarjeta micro SD Botón de encendido Botón de reinicio Botón de menú Botón de modo Botón REC * Botón OK ** Botón MIC *** Botón PANTALLA Puerto mini-USB Puerto de registrador de GPS Puerto de cámara trasera (no compatible) Ajuste de ángulo del lente *La cámara está grabando cuando el LED parpadea en rojo. **La cámara está grabando cuando el LED parpadea en rojo.
Iconos de pantalla Modo AMPLIO RANGO DINÁMICO (activado) Señal de GPS (no conectada) Tiempo de grabación (clip actual) Grabación (activado) Resolución de video Grabación del estado de espera Tiempo de grabación en bucle Valor de exposición Modo de estacionamiento (activado) Sensor G Nivel de sensibilidad Tarjeta de memoria (insertada) Micrófono (apagado) Fecha actual Hora (DD / MM / AAAA) (24h) Señal GPS (bloqueada) Micrófono (activado) Cargar batería Número de placa 71
Conectar el mini usb a la cámara Las luces LED azules indican que el dispositivo está cargando o está encendido $KRUD SXHGH GHVFRQHFWDUVH GH IXHQWH GH DOLPHQWDFLµQ /D F£PDUD VH DSDJDU£ GHVSX«V GH VHJXQGRV /D F£PDUD GHEHU¯D FRPHQ]DU D JUDEDU DXWRP£WLFDPHQWH OD SUµ[LPD YH] TXH VH HQFLHQGD Presionar el botón de menú dos veces Presionar el botón de 2.
Paso 4: Montar la cámara trasera Montar la cámara trasera como se muestra a continuación. Usar el cable de la cámara trasera provisto para conectar la cámara trasera a la cámara frontal.
Paso 5: Instalación de la Cámara en el Parabrisas Colocar la cámara en el soporte y pasar con cuidado el cable de alimentación alrededor del parabrisas y colocarlo debajo de la moldura. Conectar el cable del cargador de automóvil a una toma de corriente de 12V DC o al encendedor de cigarrillo del automóvil. Conectar el cargador del automóvil a la cámara. La cámara iniciará automáticamente la grabación una vez que esté encendida.
5. Operación Básica Fuente de alimentación del dispositivo El dispositivo se enciende automáticamente cuando se enchufa a una toma de accesorios de 12V o encendedor de cigarrillos y recibe una carga (es decir: el vehículo se enciende). Para encender el dispositivo manualmente, mantenga presionado el botón de ENCENDIDO hasta que aparezca la pantalla de bienvenida. La cámara comenzará a grabar automáticamente cuando se encienda.
Configuraciones de menú Encienda la cámara. Si la cámara está grabando, presione el botón REC para detener la grabación.
Grabación de vídeo La cámara comenzará a grabar automáticamente cuando el dispositivo recibe una carga. El LED se ilumina y el punto rojo parpadeará cuando el dispositivo esté grabando. Presione el botón REC para detener la grabación.Presione el botón REC para detener la grabación. La cámara comienza a grabar automáticamente cuando se enciende Reproducción de vídeo Modo de reproducción La reproducción de videos se puede hacer en el dispositivo o una computadora.
Durante la reproducción, use OK (pausa), MIC (avance rápido) y Botones REC (rebobinar) para controlar la reproducción de video. Para reproducir un video en la computadora, use un adaptador de tarjeta SD o conecte el dispositivo a la computadora directamente con el cable USB. Para reproducir un video usando un adaptador de tarjeta SD, retire la tarjeta de memoria e insértela en un adaptador de tarjeta SD. Coloque el adaptador en la computadora.
Monitor de estacionamiento Conecte la grabadora cableado inteligente para estacionamiento (necesita inteligente por separado). ver un video tutorial. de conducción al equipo de activar la función de monitor de comprar el equipo de cableado Visite support.rexingusa.com para Conexión de wifi Descargue la aplicación “Rexing Connect” de App Store / Google Play Store. 1. 2. 3. 4. Para acceder o salir de la función Wi-Fi, mantenga presionado REC.
Registrador GPS (Se necesita comprar por separado) Cuando se conecta a la cámara, se registrará la velocidad y la ubicación de su vehículo mientras conduce. Señal de GPS (no conectada) Luego puede acceder a esta información mientras reproduce sus grabaciones utilizando el reproductor de video GPS (para Windows y Mac, disponible en rexingusa.com). Presione el botón MENÚ dos veces \ LQJUHVH D OD &RQȴJXUDFLµQ GHO sistema.
Tomando fotos Para tomar una foto, detenga la grabación de video y cambie al Modo foto. Presione el botón OK para tomar una foto. Cambie al modo Reproducción y seleccione una foto para ver Para ver una foto, detenga la grabación de video y cambie al Modo de reproducción. Presione los botones REC y MIC para alternar entre sus fotos. Para eliminar una foto, detenga la grabación de video y cambie al Modo de reproducción y cambie entre los videos y las fotos a la que quiere borrar.
3. Kamera übersicht 1. 2. 3. 4. 5. 10. 11. 12. 13. 6. 8. 9. 7. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Micro-SD-Kartensteckplatz EIN- / AUS-Taste RÜCKSETZUNGS-Taste MENÜ-Taste MODUS-Taste AUFNAHME-Taste * OK-Taste ** MIC-Taste*** BILDSCHIRM-Taste Mini-USB-Anschluss CPS-Logger-Anschluss Rückfahrkamera-Anschluss Objektiv-Winkelverstellung *Die Kamera nimmt auf, wenn die LED rot blinkt. **Die Kamera nimmt auf wenn die LED rot aufblinkt.
Bildschirmsymb WDR-Modus (ein) GPS Signal (nicht verbunden) Schleifenaufnahme Zeit (current clip) Aufnahme (ein) Aufnahme Standby- Status 9LGHR $Xȵ¸VXQJ Schleifenaufnahme Zeit Park-Modus (ein) Belichtungswert G-Sensor Sensibilitätsstufe Speicherkarte (eingesteckt) MIC (Aus) Aktuelles Datum Zeit (TT/MM/JJJJ) (24 Std) GPS Signal (gesperrt) MIC (Aus) Batterie Laden Plattennummer 87
4. Installation Schritt 1: Installation der Dash-Cam Legen Sie das 3M-Band auf die Halterung und richten Sie die Halterung rechtwinklig zur Dach- und Motorhaubenlinie des Fahrzeugs aus. Wichtig! Stellen Sie sicher, dass die T-Verriegelung auf der Halterung in die richtige Richtung ausgerichtet ist. Drücken Sie die Halterung fest auf die Windschutzscheibe. Warten Sie mindestens 20 Minuten, bevor Sie die Kamera montieren.
Drücken Sie die Ein/ Aus-Taste, um das Gerät auszuschalten Schritt 3: Kamera einschalten und Speicherkarte formatieren Schließen Sie das Ladegerät an den Zigarettenanzünder des Autos und die Kamera an, um die Kamera mit Strom zu versorgen. Um sicherzustellen, dass die VIP-Aufzeichnungen korrekt und fehlerfrei auf Ihre Speicherkarte aufzeichnet. Bevor Sie HLQH QHXH 6SHLFKHUNDUWH YHUZHQGHQ N¸QQHQ P¾VVHQ 6LH die Karte in der Kamera mit der Formatierungsfunktion formatieren.
Mini-USB an die Kamera anschließen Blaue LEDLeuchten zeigen an, dass das Gerät geladen oder eingeschaltet ist 6LH N¸QQHQ QXQ GLH 9HUELQGXQJ ]XU 6WURPYHUVRUJXQJ WUHQQHQ 'LH .DPHUD VFKDOWHW VLFK QDFK 6HNXQGHQ DXV 'LH Kamera sollte beim nächsten Einschalten automatisch mit GHU $XIQDKPH EHJLQQHQ Drücken Sie die MenüTaste zweimal Drücken Sie die OK-Taste, um das Formatieren der Karte zu bestätigen.
Schritt 4: Rückfahrkamera befestigen Montieren Sie die Rückfahrkamera wie unten abgebildet. Verwenden Sie das mitgelieferte Rückfahrkamerakabel, um die Rückfahrkamera mit der Frontkamera zu verbinden.
Schritt 5: Installation der Kamera auf der Windschutzscheibe Legen Sie die Kamera auf die Halterung und führen Sie das Stromkabel vorsichtig um die Windschutzscheibe herum und stecken Sie es unter die Verkleidung. Stecken Sie das Autoladekabel in eine 12 V DC-Steckdose oder in den Zigarettenanzünder des Autos. Schließen Sie das Autoladegerät an die Kamera an. Die Kamera startet die Aufnahme automatisch, sobald sie eingeschaltet wird.
5. Grundbedienung Gerät-Stromversorgung Das Gerät wird automatisch eingeschaltet, wenn es an eine 12 V DC-Steckdose oder einen Zigarettenanzünder angeschlossen und geladen wird (d.h.: das Fahrzeug wird gestartet). Um das Gerät manuell einzuschalten, halten Sie die Ein/AusTaste gedrückt, bis der Begrüßungsbildschirm erscheint. Die Kamera beginnt automatisch mit der Aufnahme, wenn sie eingeschaltet wird. Halten Sie die Ein/Aus-Taste gedrückt, um das Gerät manuell einzuschalten.
Menüeinstellungen Schalten Sie die Kamera ein. Wenn die Kamera gerade aufnimmt, drücken Sie die REC-Taste, um die Aufnahme zu beenden. Halten Sie die MODE-Taste gedrückt und wechseln Sie in den gewünschten Modus. Drücken Sie die MENÜ-Taste einmal, um das Einstellungsmenü für einen Modus aufzurufen. Drücken Sie die Menü-Taste ]ZHLPDO XP GLH 6\VWHPHLQVWHOOXQJHQ ]X ¸QHQ Systemsymbol Modussymbol Drücken Sie die MenüTaste, um die gewünschte Einstellung zu wählen Drücken Sie die Modus-Taste und wechseln Si
Videoaufnahme Die Kamera beginnt automatisch mit der Aufnahme, wenn das Gerät aufgeladen wird. Die LED leuchtet und der rote Punkt blinkt, wenn das Gerät aufnimmt. Drücken Sie auf die REC-Taste, um die Aufnahme zu beenden. Die Kamera startet die Aufnahme automatisch beim Einschalten Videowiedergabe Wiedergabemodus Die Wiedergabe von Videos kann auf dem Gerät oder einem Computer erfolgen.
Verwenden Sie während der Wiedergabe die Tasten OK (Anhalten), MIC (Vorspulen) und REC (Zurückspulen), um die Videowiedergabe zu steuern. Um ein Video auf dem Computer abzuspielen, verwenden Sie entweder einen SD-Kartenadapter oder schließen Sie das Gerät mit dem USB-Kabel direkt an den Computer an. Um ein Video mit einem SD-Kartenadapter wiederzugeben, entfernen Sie die Speicherkarte und stecken Sie sie in einen SD-Kartenadapter ein. Stecken Sie den Adapter in den Computer ein.
Park-monitor Schließen Sie die Dash-Cam an das Smart Hardwire-Kit an, um die Parkmonitor-Funktion zu aktivieren (das Smart Hardwire-Kit muss separat erworben werden). Bitte besuchen Sie support. rexingusa.com, um ein Video-Tutorial anzusehen. Wi-Fi Verbindung Laden Sie die „Rexing Connect“ –App aus dem App Store/ Google Play Store herunter. 1. 2. 3. 4. Um auf die Wi-Fi-Funktion zuzugreifen oder sie zu beenden, halten Sie REC gedrückt.
GPS-Logger (Muss separat gekauft werden) Wenn die Kamera angeschlossen ist, zeichnet sie während der Fahrt die Geschwindigkeit und den Standort Ihres Fahrzeugs auf. GPS Signal (nicht verbunden) Sie können dann auf diese Informationen zugreifen, während Sie Ihre Aufzeichnungen mit dem GPS-Video-Player wiedergeben (für Windows und Mac, verfügbar unter rexingusa.com). Drücken Sie zweimal die MENÜ-Taste und rufen Sie die Systemeinstellungen auf.
Fotos aufnehmen Um ein Foto aufzunehmen, stoppen Sie die Videoaufnahme und wechseln Sie in den Fotomodus. Drücken Sie die OK-Taste, um ein Foto zu machen. Wechseln Sie in den Wiedergabe modus und wählen Sie ein Foto zur Ansicht Um ein Foto anzusehen, stoppen Sie die Videoaufnahme und wechseln Sie in den Wiedergabemodus. Drücken Sie die Tasten REC und MIC, um durch Ihre Fotos zu blättern.