V1 Max Quick Start Guide JP V1 Max クイックスタートガイド FR Guide de démarrage rapide de la V1 Max IT Guida di avvio rapido V1 Max SP Guía de inicio rápido V1 Max DE V1 Max Schnellstartanleitung
Table of Contents page English Overview What’s in the Box Camera Overview Installation Basic Operation 4 5 6 8 12 日本語 概説 本製品の同梱物 カメラの概説 画面のアイコン 基本操作 18 19 20 22 27 Français Aperçu Que contient la Boîte Aperçu de la Caméra Installation Opération de Base 32 33 34 36 41 Italiano Descrizione Nella Confezione Descrizione Telecamera Installazione Funzionamento Base 2 46 47 48 50 55
page Español Visión General Qué hay en la Caja Resumen de la Cámara Instalación Operación Básica 60 61 62 64 69 Deutsch Übersicht Verpackungsinhalt Kamera übersicht Installation Grundbedienungen 74 75 76 78 83 3
1. Overview Thank you for choosing REXING! We hope you love your new product as much as we do. If you need assistance, or have any suggestions to improve it, please contact us. You can reach us via care@rexingusa.com or call us at (203) 800-4466. Our support team will respond you as soon as possible. Always a surprise in Rexing. Check us out here. https://www.facebook.com/rexingusa/ https://www.instagram.com/rexingdashcam/ https://www.rexingusa.
2. What’s in the box 3. 2. 1. 7. 4. 5. 1. 2. 3. 4. 5. 6. 7. Rexing V1 Max Dashboard Camera Car Power Connector (12ft) 3M Adhesive Mount USB Cable User Manual Safety Guide Cable Management Tool 6.
3. Camera Overview 6. 7. 1. 2. 4. 5. 8. 3. 9. 10. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. OK (Confirm) Button / Emergency Lock Button Up Navigation Button / Record Button* Power Button / Screen Toggle Button Down Navigation Button / Mic Button** Menu Button / Mode Button Micro SD Card Slot Reset Button USB Charging Port Rear Camera Port (Not Support) GPS Logger Port (Built-in GPS Logger) *The camera is recording when the LED is flashing red. **The device is charging or powered on when the LED is solid white.
Screen Icons Recording (ON) GPS Signal (Connected) Wi-Fi (ON) MIC(ON) Time(24h) Current Date (MM/DD/YYYY) Emergency Lock GPS Signal (Not Connect) Wi-Fi (Not Connect) MIC (OFF) 7
4. Installation Orient the mount as shown Step 1: Install the Dash Cam Place the 3M tape on the Mount and properly orient the Mount square to the roof and hood line of the vehicle. Important! Ensure the T-interlock on the Mount is oriented in the correct direction. Firmly press the Mount onto the windshield. Wait at least 20 minutes before mounting the camera. On the illustration Orient the mount as shown.
Step 2: Insert the Memory Card The Rexing V1 Max accepts [Class 10/UHS-1 or higher] Micro SD memory cards up to 256GB. You will need to insert a memory card before you can begin recording. Before inserting or removing a memory card, first ensure you’ve powered down the device. Gently push the memory card in until you hear a click, and allow the spring release to push the card out.
You may now disconnect from power. The camera will shut down after 3 seconds. The camera should begin recording automatically the next time it is powered on.
Step 4: Installing the Camera onto the Windshield Place the camera on the mount and carefully route the power cable around the windscreen and tuck in under the trim. Plug the Car Charger Cable into a 12V DC power outlet or the car cigarette lighter. Connect car charger to the camera. The camera will auto-start recording once powered on.
5. Basic Operation Device Power The device is automatically powered on when plugged into a 12V accessory socket or cigarette lighter and received a charge (i.e.: the vehicle is started). To turn the device on manually, press and hold the Power button until the welcome screen appears. The camera will automatically start recording when power on. Press and hold the Power button to turn the device on manually Menu Settings Power the camera On.
Video Recording The camera will automatically start recording when the device receives charge. The LED lights and red dot will blink red device when recording. Press the REC button to stop recording. The camera automatically starts recording when powered on Control playback with OK, REC and MIC button Playback mode EMR Mode To use the Emergency Record Mode, press the "OK/EMR" button to manually record a 20 second video that is automatically saved and locked.
To playback a video on the computer either use an SD card adapter or connect the device to the computer directly using the USB cable. To playback a video using an SD card adapter, remove the memory card and insert it into an SD card adapter. Place the adapter in the computer. Select Mass Storage Connect USB connector to computer To playback a video using USB cable, connect the USB Cable to the device and the computer. After the device powers up, press the OK Button to select Mass Storage.
Wi-Fi Connect Download “Rexing Connect” app from the App Store/Google Play Store. 1. 2. 3. To access or exit the Wi-Fi feature, press the menu button/ playbackbutton twice to access system settings. Find "Wifi" from the list, tap OK Button , set the Wi-Fi feature "ON" and "OFF". Find “SSID” from the system setting > About. Open Wi-Fi settings on your phone, find “SSID” from the list, tap to connect.
GPS Logger When connected to the camera, it will record the speed and location of your vehicle as you drive. You can then access this information while playing back your recordings using the GPS Video player (For windows and Mac, available at rexingusa.com). The dash cam will automatically search for the GPS signal once it’s connected to the power source. Press the MENU button twice and go to System Settings. Toggle the GPS Speed Unit setting, and select your favorite speed unit.
Taking Photos To take a photo, stop video recording and hold down the REC button. Toggle to the Playback mode and select a photo to view To view a photo, stop video recording and hold on MENU button to the Playback Mode. Press the REC and MIC Buttons to toggle through your photos. To delete a photo, stop video recording and toggle to the Playback Mode and toggle through the videos and photos to the one you want to delete. Hold the MENU to toggle the Delete option.
1. 概説 REXINGをお選びいただきありがとうございます! 私たちはお客様が 私たちと同じくらいこの新製品を気に入っていただくことを願ってい ます。 サポートが必要な場合、 または製品を改善するための提案がある場 合は、 ご連絡ください。jpcare@rexingusa.comに電子メールを送る ことができます。当社のサポートチームは、 できるだけ早くお客様 からのお問い合わせにお答えいたします。 でいつも驚きを。 こちらから最新情報をチェックしてください。 https://www.facebook.com/rexingusa/ https://www.instagram.com/rexingdashcam/ https://www.rexingusa.
2. 本製品の同梱物 3. 2. 1. 7. 4. 5. 1. 2. 3. 4. 5. 6. 7. Rexing V1 Maxドライブ レコーダー 車の電源コネクタ (12フ ィート) 3M接着マウント USBケーブル クイックスタートガイド 安全ガイド ケーブル管理ツール 6.
3. カメラの概要 6. 7. 1. 2. 4. 5. 8. 3. 9. 10. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
画面アイコン 録音(ON) GPS信号 (接続済み) Wi-Fi (ON) マイクON) 時間(24時間) 現在の日付 (MM/DD/YYYY) 緊急ロック GPS信号 (接続しない) Wi-Fi (接続しない) MIC (オフ) 21
4.
ステップ2:メモリーカードを挿入します Rexing V1 Maxは、最大256GBのマイクロSDメモリカー ド(Class 10/UHS-1以上)に対応しています。録画を開始する前にメモリー カードを挿入する必要があります。メモリーカードを挿入または取 り外す前に、まず機器の電源が切れていることを確認してくださ い。カチッという音がするまでメモリーカードを静かに押し込み、 そして、押すとスプリングが解除されてカードを取り外すことができま す。 ステップ3:カメラの電源を入れて、 メモリーカードを初 期化します 充電器を車のシガーライターとカメラに接続して、カメラの電源 を入れます。V1 Maxがメモリーカードに適切に間違いなく記録す るためには、新しいメモリーカードを使用し始める前に、初期化 機能を使用してカメラ内でカードを初期化しなければなりませ ん。初期化する前に、必ずメモリーカードに保存されている重要 なデータをバックアップしてください。 メモリーカードを初期化するためには、メモリーカードが挿入されてい ることを確認した後、電源に接続して、機器の電源を入れます。録画ボ タンを押して録画を停止します。
ここで電源を切ります。3秒後にカメラの電源が切れます。カメラは 次回電源を入れた時、 自動的に録画が開始されるはずです。 峬峖峰屌峧峊峾岪ԣ山 ್ౕ ֮峧峊峾岪ԣ屯屾屃 岶屌峔岆峠岴屌峩峎峓岪֮ 屯岖山 24
ステップ4:フロントガラスへのカメラの取り付け カメラをマウントに置き、電源ケーブルをフロントガラスの周りに注 意して配線し、 トリムの下にしまい込みます。 車載充電器のケーブルを12V DC電源コンセントまたは車のシガーラ イターに差し込みます。 車載充電器をカメラに接続します。電源を入れるとカメラは自動的に 録画を開始します。 電源ケーブルを ドライブレコーダ ー に配線します ミニUSBコネクタを ライブレコーダ ー に差し込みます 充電器を電源コンセント またはシガーライターに 差し込みます 25
5.
ビデオ録画 機器が充電されたら、カメラは自動的に録画を開始します。録画中 はLEDライトと赤い点が点滅します。 電源が入ると、 カメラは自動的 に録画を開始します OKボタン、録画ボタンおよびマ イクボタンで再生を制御します。 再生モード ビデオの再生 ビデオの再生は、機器またはコンピューターで実行できます。 機器でビデオを再生するためには、再生モードに切り替えます。録 画ボタンとマイクボタンを使用して、再生したいビデオに切り替えま す。OKボタンを押して再生します。 再生中は、OK(一時停止)、録画(巻き戻し)およびマイク (早送り)ボタ ンを使用して、ビデオの再生を制御します。 27
コンピューターでビデオを再生するには、SDカードアダプターを使 用するか、 またはUSBケーブルを使用して機器をコンピューターに 直接接続します。 SDカードアダプターを使用してビデオを再生するためには、 メモ リーカードを取り外して、SDカードアダプターに挿入します。 アダプター をコンピューターに挿入します。 マスストレージ USBコネクタをコ ンピューターに接 続します マスストレージを選択 USBケーブルを使用してビデオを再生するためには、USBケーブル を機器とコンピューターに接続します。機器に電源が入った後、OK ボタンを押してマスストレージを選択します。 コンピューター上で、機器ドライブをに移動します。ビデオは 「Front_xxx」と「Back_xxx」サブフォルダーに分類されます。 ロックされたビデオは、メモリカードの「front_emr」および 「back_emr」フォルダの下にあります。 28
Wi-Fi 接続 App Store/Google Play ストアから 「Rexing Connect」 アプリをダウン ロードします。 1. Wi-Fi機能にアクセスまたはWi-Fi機能を終了するためには、 録画ボタンを長押しします。 2. スマートフォンでWi-Fi設定を開き、 リストから 「SSID」を見つ け、タップして接続します。 (デフォルトのパスワード: 12345678) 3. Rexing Connectアプリを開き、 「接続」をタップしてリアルタイ ムビデオストリーミングページに入ります。 1. 2. 3. 4. 接続されたら、ドライブレコーダー画面がカメラ表示に切り 替わり、「Wi-Fi接続」 メッセージが表示されます。Rexing Connectアプリを使用すると、ドライブレコーダー画面のライ ブプレビューを表示したり、録画を開始/停止したりすることが できます。モバイル機器を使って、録画を表示したり、保存する ことができます。 Wi-Fi接続機能に関する詳細については、www.rexingusa.
GPSロガー カメラに接続すると、運転中の車の速度と位置が記録されま す。GPSビデオプレーヤーを使用して記録を再生しながら、 これ らの情報にアクセスすることができます(WindowsおよびMacの 場合、rexingusa.comで入手可能) 。 ドライブレコーダーは、電源に接続されるとGPS信号を自動的に検 索します。 メニューボタンを2回押して、システム設定に移動しま す。GPS速度単位の設定に切り替えて、 希望の速度単位を選択しま す。 GPS信号が検出されると、画面のアイコンは「未接続」から「アク ティブ」に変わります‐以下のアイコンのように。 GPS機能がアクティブ GPS信号 (未接続) 駐車モニター ドライブレコーダーをスマート直接配線コード (別途購入する必要 があります)に接続して、パーキングモニター機能をアクティブに します。www.support.rexingusa.
写真を撮る 写真を撮るためには、ビデオ録画を 停止し、写真モードに切り替えます。 再生モードに切り替え て、表示するための写 真を選択します OKボタンを押して写真を撮ります。 写真を表示するためには、ビデオ録 画を停止し、再生モードに切り替えま す。 録画ボタンとマイクボタンを押して、 写真に切り替えます。 写真を削除するためには、ビデオ録 画を停止して再生モードに切り替 え、削除したいビデオと写真に切り 替えます。 メニューを1回押して、削除オプション を表示します。 削除オプションに切り 替えます OKボタンを押して、 「現在選択してい るものを削除」または「全て削除」を 選択します。 希望のオプシ ョンを選択し ます 31
1. Aperçu Nous vous remercions pour votre choix sur REXING ! Nous espérons que vous aimiez votre nouveau produit autant que nous. Si vous avez besoin d’aide ou vous avez des suggestions pour l’améliorer, veuillez nous contacter. Vous pouvez nous joindre via care@rexingusa.com. Notre équipe d’assistance vous répondra le plus vite possible. Toujours une surprise à Rexing. Consultez-nous ici. https://www.facebook.com/rexingusa/ https://www.instagram.com/rexingdashcam/ https://www.rexingusa.
2. Que contient la boîte 3. 2. 1. 7. 4. 5. 1. 2. 3. 4. 5. 6. 7. Rexing V1 Max Dashboard Camera Connecteur d’alimentation de voiture (12 pieds) Support adhésif 3M Câble USB Guide de démarrage rapide Guide de sécurité Outil de gestion des câbles 6.
3. Aperçu de la Caméra 6. 7. 1. 2. 4. 5. 8. 3. 9. 10. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Icônes d’écran Enregistrement (ON) Signal GPS (Connecté) Wi-Fi (ON) MIC(ON) Heure(24h) Date actuelle (MM/DD/YYYY) Verrouillage d'urgence Signal GPS (Pas connecte) Wi-Fi (pas de connexion) MIC (OFF) 35
4. Installation Étape 1: Installez la Dash Cam Orientez le support comme indiqué Placez le ruban de 3 m sur le support et orientez correctement le carré du support sur la ligne de toit et de capot du véhicule. Appuyez fermement le support sur le pare-brise. Attendez au moins 20 minutes avant de monter la caméra. Sur l’illustration: Orientez le support comme indiqué.
Étape 2: Insérez la carte mémoire La Rexing V1 Max accepte les cartes mémoire Micro SD [Classe 10 / UHS-1 ou supérieure] jusqu’à 256 Go. Vous devrez insérer une carte mémoire avant de pouvoir commencer l’enregistrement. Avant d’insérer ou de retirer une carte mémoire, assurez-vous d’abord d’avoir éteint l’appareil. Poussez doucement la carte mémoire jusqu’à ce que vous entendiez un clic et laissez le ressort de dégagement pousser la carte vers l’extérieur.
Vous pouvez maintenant vous déconnecter de l’alimentation. La caméra s’éteindra après 3 secondes. La caméra devrait commencer à enregistrer automatiquement la prochaine fois qu’elle sera allumée. $SSX\H] VXU OH ERXWRQ 0HQX GHX[ IRLV $SSX\H] VXU OH ERXWRQ &RQILUPHU SRXU FRQILUPHU OH IRUPDWDJH GH OD FDUWH 38
Étape 4: Installation de la caméra sur le pare-brise Placez la caméra sur le support et passez soigneusement le câble d’alimentation autour du pare-brise et glissez-le sous la garniture. Branchez le câble du chargeur de voiture dans une prise de courant 12V CC ou dans l’allume-cigare de la voiture. Connectez le chargeur de voiture à la caméra. La caméra démarre automatiquement l’enregistrement lorsqu’elle est allumée.
5. Opération basique Mise sous tension de l’appareil L’appareil est automatiquement mis sous tension lorsqu’il est branché sur une prise accessoire de 12V ou un allume-cigare et a reçu une charge (c’est-à-dire que le véhicule est démarré). Pour allumer l’appareil manuellement, appuyez sur le bouton POWER et maintenez-le enfoncé jusqu’à ce que l’écran d’accueil s’affiche. La caméra démarre automatiquement l’enregistrement lorsqu’elle est allumée.
Enregistrement video La caméra démarre automatiquement l’enregistrement lorsqu’elle reçoit une charge. Les voyants LED et le point rouge clignoteront en rouge lors de l’enregistrement. Appuyez sur le bouton REC pour arrêter l’enregistrement. La caméra démarre automatiquement l’enregistrement lorsqu’elle est allumée. Contrôlez la lecture avec les boutons OK, REC et MIC Mode Lecture Lecture vidéo La lecture des vidéos peut être effectuée sur la caméra ou un ordinateur. Pour lire une vidéo sur l’appareil.
Pour lire une vidéo sur l’ordinateur, utilisez un adaptateur de carte SD ou connectez l’appareil à l’ordinateur directement à l’aide du câble USB. Pour lire une vidéo à l’aide d’un adaptateur de carte mémoire SD, retirez la carte mémoire et insérez-la dans un adaptateur de carte SD. Insérez l’adaptateur dans l’ordinateur.
Connexion Wi-Fi Téléchargez l’application « Rexing Connect » depuis App Store / Google Play Store. 1. Pour accéder ou quitter la fonction Wi-Fi, maintenez le bouton REC enfoncé. 2. Ouvrez les paramètres Wi-Fi sur votre téléphone, recherchez « SSID » dans la liste, validez pour vous connecter. (Mot de passe par défaut: 12345678) 3. Ouvrez l’application Rexing Connect, appuyez sur « Connect » pour accéder à la page de diffusion vidéo en temps réel. 1. 2. 3. 4.
Enregistreur GPS Une fois connecté à la caméra, le GPS enregistrera la vitesse et l’emplacement de votre véhicule pendant que vous conduisez. Vous pouvez ensuite accéder à ces informations pendant la lecture de vos enregistrements à l’aide du lecteur vidéo GPS (pour Windows et Mac, disponible sur rexingusa.com). La Dash Cam recherchera automatiquement le signal GPS une fois connectée à la source d’alimentation. Appuyez deux fois sur le bouton MENU et allez jusqu’aux paramètres système.
Prises de vue Pour prendre une photo, arrêtez l’enregistrement vidéo et passez en mode photo. Basculez en Mode lecture et sélectionnez une photo à afficher Appuyez sur le bouton OK pour prendre une photo. Pour afficher une photo, arrêtez l’enregistrement vidéo et passez en mode lecture. Appuyez sur les boutons REC et MIC pour parcourir vos photos.
1. Descrizione Grazie per aver scelto REXING! Speriamo che ami il tuo nuovo prodotto tanto quanto noi. Se hai bisogno di assistenza o hai suggerimenti per migliorarlo, ti preghiamo di contattarci. Puoi contattarci tramite care@ rexingusa.com. Il nostro team di supporto ti risponderà il prima possibile. Sempre una sorpresa in Rexing. Scoprici qui. https://www.facebook.com/rexingusa/ https://www.instagram.com/rexingdashcam/ https://www.rexingusa.
2. Nella Confezione 3. 2. 1. 7. 4. 5. 1. 2. 3. 4. 5. 6. 7. Telecamera da Cruscotto V1 Max Rexing Connettore per Auto (12ft) Supporto Adesivo 3M Cavo USB Guida Rapida Guida alla Sicurezza Cable Management Tool 6.
3. Descrizione Telecamera 6. 7. 1. 2. 4. 5. 8. 3. 9. 10. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Pulsante OK (Conferma) / pulsante Blocco Emergenza Pulsante di Navigazione Su/ Pulsante Record* Pulsante Power/ Pulsante Screen Toggle Pulsante di Navigazione Giù / Pulsante Mic** Pulsante Menu / Pulsante Mode Alloggiamento Scheda Micro SD Pulsante Reset Porta Carica USB Porta Telecamera Posteriore (Non supportato) Porta GPS Logger (Logger GPS integrato) *La telecamera registra quando il LED lampeggia rosso.
Icone dello Schermo Registrazione(ON) Segnale GPS (Collegato) Wi-Fi (ON) MIC(ON) Tempo (24h) Data odierna (GG / MM / AAAA) Blocco di emergenza Segnale GPS (Non connesso) Wi-Fi (non connesso) MIC (OFF) 49
4. Installazione Passo 1: Installare la Dash Cam Orientare il supporto come mostrato Posizionare il nastro 3M sul Supporto e orientare correttamente il quadrato al tettuccio del veicolo. Premere bene il Supporto sul parabrezza. Attendere almeno 20 minuti prima di montare la telecamera. Nell’illustrazione: Orientare il supporto come mostrato.
Passo 2: Inserire la Scheda di Memoria V1 Max Rexing ccetta schede di memoria Micro SD [Classe 10/ UHS-1 o superiore] fino a 256GB. Si deve inserire una scheda di memoria prima di poter cominciare a registrare. Prima di inserire o rimuovere una scheda di memoria, assicurarsi di aver spento il dispositivo. Gentilmente spingere la scheda di memoria finché si sente un clic, e far rilasciare la molla per espellerla.
Ora si può scollegare dalla corrente. La telecamera si spegne dopo 3 secondi. Dovrebbe cominciare a registrare automaticamente la volta successiva che si accende.
Passo 4: Installare la Telecamera sul Parabrezza Posizionare la telecamera sul supporto e indirizzare con cura il cavo di alimentazione attorno al parabrezza e infilarlo sotto il bordo. Inserire il Cavo del Caricabatterie per Auto nella presa 12V DC o nell’accendisigari. Collegare il caricabatterie per auto alla telecamera. La telecamera inizia automaticamente a registrare una volta accesa.
5. Funzionamento Base Accensione Dispositivo Il dispositivo automaticamente si accende quando collegato a una presa per gli accessori 12V o all’accendisigari e riceve una carica (il veicolo è in moto). Per accendere il dispositivo manualmente, tenere premuto il pulsante POWER finché appare la schermata di benvenuto. La telecamera automaticamente inizia a registrare quando accesa. Tenere premuto il pulsante Power per accendere il dispositivo manualmente Impostazioni Menu Accendere la telecamera.
Registrazione Video La telecamera automaticamente inizia a registrare quando il dispositivo riceve una carica. I LED e il punto rosso lampeggiano rosso quando registra. Premere il pulsante REC per fermare la registrazione. La caméra démarre automatiquement l’enregistrement lorsqu’elle est allumée. Contrôlez la lecture avec les boutons OK, REC et MIC Mode Lecture Riproduzione Video La riproduzione di video può essere fatta sul dispositivo o un computer. Per riprodurre un video sul dispositivo.
Per riprodurre un video sul computer, utilizzare un adattatore per schede SD o collegare direttamente il dispositivo al computer usando il cavo USB. Per riprodurre un video utilizzando un adattatore per schede SD, rimuovere la scheda di memoria e inserirla in un adattatore. Posizionare l’adattatore nel computer. Mass Storage Selezionare Mass Storage Collegare il connettore USB al computer Per riprodurre un video utilizzando un cavo USB, collegare il cavo USB al dispositivo e al computer.
Connessione Wi-Fi Scaricare l’app “Rexing Connect” dall’App Store/Google Play Store. 1. Per accedere a o uscire dalla funzione Wi-Fi, tenere premuto il pulsante REC. 2. Aprire le impostazioni Wi-Fi sul telefono, trovare “SSID” dalla lista, premere per connettersi. (Password predefinita: 12345678) 3. Aprire l’app Rexing Connect, premere “Connect” per entrare alla pagina streaming realtime video. 1. 2. 3. 4.
GPS Logger Quando connesso alla telecamera, registra la velocità e posizione del veicolo mentre si guida. Si può poi accedere alle informazioni mentre si riproducono le registrazioni usando il GPS Video player (Per Windows e Mac, disponibile su rexingusa.com). La dash cam automaticamente cerca il segnale GPS una volta collegata alla corrente. Premere il pulsante MENU due volte e andare alle Impostazioni di Sistema. Passare all’impostazione Unità Velocità GPS, e selezionare la favorita.
Scattare Foto Per scattare una foto, fermare la registrazione video e passare alla Modalità Foto. Premere il pulsante per scattare una foto. Passare alla modalità Riproduzione e selezionare una foto per visualizzarla OK Per visualizzare una foto, fermare la registrazione video e passare alla Modalità Riproduzione. Premere i pulsanti REC e MIC per passare tra le foto.
1. Visión General ¡Gracias por elegir REXING! Esperamos que usted ame su nuevo producto tanto como nosotros la amamos. Si usted necesita ayuda o tiene alguna sugerencia para mejorarla, contáctenos. Puede comunicarse con nosotros a través de care@rexingusa.com. Nuestro equipo de soporte le responderá lo antes posible. Siempre es una sorpresa en Rexing. Visítenos aquí. https://www.facebook.com/rexingusa/ https://www.instagram.com/rexingdashcam/ https://www.rexingusa.
2. Qué hay en la caja 3. 2. 1. 7. 4. 1. 2. 3. 4. 5. 6. 7. Cámara Rexing V1 Max Dashboard Conector de alimentación para automóvil (12 pies) Montaje adhesivo 3M Cable USB Guía de inicio rápido Guía de seguridad Herramienta de gestión de cables 5. 6.
3. Resumen de la Cámara 6. 7. 1. 2. 4. 5. 8. 3. 9. 10. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Iconos de pantalla Grabación (ON) Señal GPS (Conectado) Wi-Fi (EN) MIC (ENCENDIDO) Tiempo(24h) Fecha actual (MM / DD / AAAA) Bloqueo de emergencia Señal GPS (No conectar) Wi-Fi (no conectado) MIC (APAGADO) 63
4. Instalación Paso 1: Instale la Dash Cam Oriente la montura como se muestra Coloque la cinta 3M en el soporte y oriente adecuadamente el cuadrado del soporte hacia el techo y la línea del capó del vehículo. Presione firmemente el soporte sobre el parabrisas. Espere al menos 20 minutos antes de montar la cámara. En la ilustración: Oriente el montaje como se muestra.
Paso 2: Inserte la Tarjeta de Memoria El Rexing V1 Max acepta tarjetas de memoria Micro SD [Clase 10 / UHS-1 o superior] de hasta 256GB. Deberá insertar una tarjeta de memoria antes de comenzar a grabar. Antes de insertar o extraer una tarjeta de memoria, primero asegúrese de haber apagado el dispositivo. Empuje suavemente la tarjeta de memoria hacia adentro hasta que escuche un clic y permita que la liberación de la palanca empuje la tarjeta hacia afuera.
Ahora puede desconectarse de la fuente de energía. La cámara se apagará después de 3 segundos. La cámara debería comenzar a grabar automáticamente la próxima vez que se encienda.
Paso 4: Instalación de la Cámara en el Parabrisas Coloque la cámara en el soporte y pase con cuidado el cable de alimentación alrededor del parabrisas y colóquelo debajo de la moldura. Conecte el cable del cargador del automóvil a una toma de corriente de 12V CC o al encendedor del automóvil. Conecte el cargador del automóvil a la cámara. La cámara iniciará automáticamente la grabación una vez encendida.
5. Operación Básica Energía del dispositivo El dispositivo se enciende automáticamente cuando se enchufa a una toma de accesorios de 12V o encendedor de cigarrillos y recibe una carga (es decir, se arranca el vehículo). Para encender el dispositivo manualmente, mantenga presionado el botón de ENCENDIDO hasta que aparezca la pantalla de bienvenida. La cámara comenzará a grabar automáticamente cuando se encienda.
Grabación de vídeo La cámara comenzará a grabar automáticamente cuando el dispositivo reciba una carga. Las luces LED y el punto rojo parpadearán en rojo cuando grabe. Presione el botón REC para detener la grabación. La cámara comenzará a grabar automáticamente cuando se encienda. Controla la reproducción con el botón OK, Botones REC y MIC Modo de reproducción Reproducción de vídeo La reproducción de vídeos se puede hacer en el dispositivo o un ordenador.
Para reproducir un vídeo en el ordenador, use un adaptador de tarjeta SD o conecte el dispositivo al ordenador directamente usando el cable USB. Para reproducir un vídeo usando un adaptador de tarjeta SD, retire la tarjeta de memoria e insértela en un adaptador de tarjeta SD. Coloque el adaptador en el ordenador. Almacenamiento Masivo Conecte el conector USB al ordenador Seleccionar Almacenamiento Masivo Para reproducir un vídeo con un cable USB, conecte el cable USB al dispositivo y al ordenador.
Conexión wifi Descargue la aplicación “Rexing Connect” de App Store / Google Play Store. 1. Para acceder o salir de la función de Wi-Fi, mantenga presionado el botón REC. 2. Abra la configuración de Wi-Fi en su teléfono, busque “SSID” en la lista, toque para conectarse. (Contraseña predeterminada: 12345678) 3. Abra la aplicación Rexing Connect, toque “Conectar” para ingresar a la página de transmisión de vídeo en tiempo real. 1. 2. 3. 4.
Registrador GPS Cuando se conecta a la cámara, registrará la velocidad y la ubicación de su vehículo mientras conduce. Luego puede acceder a esta información mientras reproduce sus grabaciones utilizando el reproductor de vídeo GPS (para Windows y Mac, disponible en rexingusa.com). La dash cam buscará automáticamente la señal GPS una vez que esté conectada a la fuente de alimentación. Presione el botón MENÚ dos veces y vaya a Configuración del sistema.
Tomando fotos Para tomar una foto, detenga la grabación de vídeo y cambie al Modo de Foto. Cambie al modo Reproducción y seleccione una foto para ver Presione el botón OK para tomar una foto. Para ver una foto, detenga la grabación de vídeo y cambie al Modo de reproducción. Presione los botones REC y MIC para alternar entre sus fotos. Para eliminar una foto, detenga la grabación de vídeo y cambie al Modo de reproducción y cambie entre los vídeos y las fotos a la que desea eliminar.
1. Übersicht Danke, dass Sie sich für REXING entschieden haben! Wir hoffen, dass Sie Ihr neues Produkt so sehr lieben wie wir. Wenn Sie Hilfe benötigen oder Vorschläge zur Verbesserung haben, kontaktieren Sie uns bitte. Sie können uns erreichen über care@rexingusa.com. Unser Support-Team wird Ihnen so schnell wie möglich antworten. Rexing überrascht immer. Erfahren hier Sie mehr über uns. https://www.facebook.com/rexingusa/ https://www.instagram.com/rexingdashcam/ https://www.rexingusa.
2. Verpackungsinhalt 3. 2. 1. 7. 4. 5. 1. 2. 3. 4. 5. 6. 7. Rexing V1 Max Dashboard Kamera Autostromanschluss (12ft) 3M Halterung mit Klebeband USB-Kabel Schnellstartanleitung Sicherheitsanleitung Kabel Management Tool 6.
3. Kamera übersicht 6. 7. 1. 2. 4. 5. 8. 3. 9. 10. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Bildschirmsymbole Aufnahme (EIN) GPS Signal (In Verbindung gebracht) W-lan (AUF) MIC(EIN) Zeit(24h) Aktuelles Datum (MM / TT / JJJJ) Notverrieg elung GPS-Signal (Nicht verbunden) Wi-Fi (keine Verbindung) MIC (AUS) 77
4. Installation Schritt 1: Dash Cam installieren Richten Sie die Camera wie in der Abbildung gezeigt. Legen Sie das 3M-Klebeband auf die Halterung und richten Sie die Halterung rechtwinklig zur Dach- und Motorhaubenlinie des Fahrzeugs. Drücken Sie die Halterung fest auf die Windschutzscheibe. Warten Sie mindestens 20 Minuten, bevor Sie die Kamera montieren.
Schritt 2: Speicherkarte einstecken Der Rexing V1 Max unterstützt Micro SDSpeicherkarten [Klasse 10/UHS-1 oder höher] bis zu 256 GB. Sie müssen eine Speicherkarte einschieben, bevor Sie mit der Aufnahme beginnen können. Bevor Sie eine Speicherkarte einschieben oder entfernen, stellen Sie sicher, dass das Gerät ausgeschaltet ist. Schieben Sie die Speicherkarte vorsichtig ein, bis Sie ein Klicken hören, und lassen Sie die Federentriegelung die Karte herausschieben.
Sie können nun die Verbindung zum Stromnetz unterbrechen. Die Kamera schaltet sich nach 3 Sekunden aus. Die Kamera sollte beim nächsten Einschalten automatisch mit der Aufnahme beginnen.
Schritt 4: Installieren Sie die Kamera an der Windschutzscheibe Legen Sie die Kamera auf die Halterung und drehen Sie das Stromkabel vorsichtig um die Windschutzscheibe und stecken Sie es unter den Trimm. Schließen Sie das Autoladekabel an eine 12V DC-Steckdose oder an den Zigarettenanzünder des Autos. Verbinden Sie das Autoladegerät mit der Kamera. Sobald die Kamera angeschaltet wird, wird sie automatisch anfangen Aufnahmen zu machen.
5. Grundbedienungen Geräteleistung Das Gerät wird automatisch ageschaltet, wenn es an eine 12V-Zubehörsteckdose oder einen Zigarettenanzünder angeschlossen und aufgeladen wird (d.h. das Fahrzeug wurde gestartet). Um das Gerät manuell einzuschalten, drücken und halten Sie die POWER-Taste, bis die Wilkommennachricht erscheint. Die Kamera beginnt automatisch mit der Aufnahme, wenn sie eingeschaltet wird.
Videoaufnahme Die Kamera beginnt automatisch Afnahmen zu machen, wenn das Gerät aufgeladen wird. Die LED blinkt rot auf, wenn die Aufnahme erfolgt. Drücken Sie die REC-Taste, um die Aufnahme zu beenden. Die Kamera beginnt automatisch mit der Aufnahme, wenn sie eingeschaltet wird Wiedergabe mit OK-Taste steuern REC- und MIC-Tasten Playback-Modus Videowiedergabe Das Abspielen von Videos kann auf dem Gerät oder einem Computer erfolgen.
Um ein Video auf dem Computer abzuspielen, verwenden Sie entweder einen SD-Kartenadapter oder schließen Sie das Gerät mit dem USB-Kabel direkt an den Computer an. Um ein Video mit einem SD-Kartenadapter abzuspielen, entfernen Sie die Speicherkarte und schieben Sie sie in einen SD-Kartenadapter ein. Schieben Sie den Adapter in den Computer ein.
Wi-Fi Verbindung Laden Sie die „Rexing Connect“ –App aus dem App Store/ Google Play Store herunter. 1. Um die Wi-Fi-Funktion abzurufen oder zu verlassen, drücken und halten Sie die REC-Taste 2. Öffnen Sie die Wi-Fi-Einstellungen auf Ihrem Telefon, suchen Sie “SSID” aus der Liste und tippen Sie auf, um eine Verbindung herzustellen. (Standardkennwort: 12345678) 3. Öffnen SIe die Rexing Connect App und tippen auf “Verbinden” um zur Echtzeit-Video-Streaming Seite zu gelangen. 1. 2. 3. 4.
GPS-Logger Wenn mit der Kamera verbunden, zeichnet sie während der Fahrt die Geschwindigkeit und den Ort Ihres Fahrzeugs auf. Sie können dann während des Abspielens Ihrer Aufnahmen mit dem GPS-Video-Player (für Windows und Mac, erhältlich bei rexingusa.com) auf diese Informationen zugreifen. Die Dash Cam wird automatisch nach dem GPS-Signal suchen, sobald sie an die Stromquelle angeschlossen ist. Drücken Sie zweimal die MENU-Taste und gehen Sie zu den Systemeinstellungen.
Wechseln Sie in den Playback-Modus und wählen Sie ein Foto zum Ansehen aus Fotos werden aufgenommen Stoppen Sie die Videoaufnahme und wechseln Sie in den Fotomodus, um ein Foto zu machen. Stoppen Sie die Videoaufnahme und wechseln Sie in den PlaybackModus, um ein Foto anzuschauen. Drücken Sie die RECMIC-Tasten, um durch Fotos zu navigieren.