Revolabs Fusion™ System Tabletop Dialer User Guide © 2008 REVOLABS, INC. All rights reserved. No part of this document may be reproduced in any form or by any means without express written permission from Revolabs, Inc. Product specifications are subject to change without notice. Part #2950065-00 REV 1.10 Rev 1.
Table of Contents Revolabs Tabletop Dialer for Fusion™ Product Description 3 Tabletop Dialer Front Panel 4 Tabletop Dialer Key Functions 6 Installing the Batteries 7 Placing a Telephone Call 8 Adding Speed Dial Numbers 8 Editing Speed Dial Numbers 9 Deleting Speed Dial Numbers 9 Adjusting Far End Volume 9 Tabletop Dialer Settings Setting Display Backlight Time 10 Setting Screen Contrast 10 Display Signal Quality 10 Display Battery Level 10 Warranty Revolabs, Inc.
User Guide Revolabs Tabletop Dialer for Fusion™ Specifications Dimensions, (L, W, H) and Weight: 4.75” (12.07 cm) x 6.75” (17.15 cm) x 2.75” (6.99 cm) 0.94 lb (0.42 kg) Radio Frequency: 07-TTDIAL-01 2.4 GHz Power Requirements: 4 AA Batteries Battery Life: Up to 6 months Range: Up to 50’ (15 meters) Line of site, no obstructions Environmental Requirements 40-100 degrees F (5-40 C) 20-85% Humidity This device complies with Part 15 of the FCC Rules.
User Guide Tabletop Dialer Front Keypad Revolabs Tabletop Dialer for Fusion™ Powering Down the Tabletop Dialer 1. Hold down the End Call button until Powering Down is displayed (about 3 seconds). 2. The Dialer will then completely shut down until you press any key to restart it. Resetting the Password 1. Power down the Dialer by holding down the End Call button. (about 3 seconds) 2. Then press and hold the Menu button while the Dialer displays “Revolabs Fusion”.
Revolabs Tabletop Dialer for Fusion™ User Guide Pairing the Tabletop Dialer to Fusion Tabletop Dialer Front Keypad (cont.) Fusion Front Panel 1. 2. 3. 4.
User Guide Tabletop Dialer Keypad Functions Revolabs Tabletop Dialer for Fusion™ Setting a Password for Administrative Control Low Battery Indicator LED The Low Battery LED will flash red when the batteries need to be replaced Menu Buttons 1. 2. 3. Press the Menu button to bring up the Main menu and press the down scroll button to select Configuration and press the Menu button At the Set Password option press the Menu button. Use the key pad to enter a password. 4.
User Guide Setting Display Backlight Time 1. 2. Press the Menu button to bring up the Main menu and press the down scroll button to select Settings and press the Menu button Press the Menu button again at Backlight Time and use the scroll buttons to select between Off, Short (3 seconds) and Long (7 seconds) and press the Menu button Revolabs Tabletop Dialer for Fusion™ Installing Batteries 1. 2. 3.
User Guide Placing a Telephone Call There are 4 options for placing a call using the Tabletop Dialer. Revolabs Tabletop Dialer for Fusion™ Editing Speed-Dial numbers 1. Press the Menu button to bring up the Main menu and press the Menu button again at the Speeddial option 1. Enter the phone number you want to dial and then press the Dial button 2. Press the Down scroll button to the Edit option and press the Menu button 2.