Revolabs Fusion™ Wireless Microphone System Installation and User’s Guide Microphones must be fully charged and paired to the Charger Base prior to first use. Rev 1.
Table of Contents Revolabs Fusion™ EUROPEAN COMPLIANCE This equipment has been approved in accordance with Council Directive 1999/5/EC “Radio Equipment and telecommunications Equipment. Conformity of the Equipment with the guidelines below is attested by the CE mark.
Installation Guide Revolabs Fusion™ INDUSTRY CANADA NOTICE TO USERS Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Installation Guide Revolabs Fusion™ Contents of box: Fusion Base Station, Fusion Base Station vertical stand, AC power adapter for Base Station, four cables shown below, remote control, Charger Base, AC wall adapter for Charger Base, four or eight wireless microphones (optional). Optional boxes: Four or eight wireless microphones, Remote IR Sensor, speakers.
Installation Guide Safety and General Information Please read the following information to ensure safe use of your Revolabs system. FCC User Information FCC Registration Number: 0014898290 FCC ID: T5V-01-FUSION Revolabs Fusion™ Base Station 8 microphones FCC ID: T5V-01-FUSION4 Revolabs Fusion™ Base Station 4 microphones FCC ID: T5V-01-EXEMIC Revolabs Solo™ Executive Microphone FCC NOTICE TO USERS Users are not permitted to make changes or modify the equipment in any way.
Installation Guide Lifesize Installation Plug red RCA connector of Cable C, the double RCA to double RCA cable, into the Fusion Base Station , then plug the other end red RCA connector into the Lifesize video-station . Plug black RCA connector of Cable C, into the Fusion Base Station , and the other black RCA connector into the Lifesize video-station . Revolabs Fusion™ Specifications Dimensions, (L, W, H) and Weight: Fusion Base Station 16.45” (41.8 cm) x 8.46” (21.
Installation Guide Revolabs Fusion™ Warranty Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective part or unit (at the discretion of the Seller) will be free of charge for the period of one year. Any attempt by the user to alter the equipment, or equipment damaged by negligence, accident, or Acts of God voids this warranty. The Seller shall not be liable for any consequential damage resulting from the malfunction of this product.
Revolabs Fusion™ Installation Guide Polycom Installation Plug red RCA connector of Cable C, the double RCA to double RCA cable, into the Fusion Base Station , then plug the other end red RCA connector into the Polycom video-station . Plug black RCA connector of Cable C, into the Fusion Base Station , and the other black RCA connector into the Polycom video-station .
Installation Guide Revolabs Fusion™ Revolabs Solo™ Indicator LED Equipment Use Microphone LED Base S Chann Microphone in Charger Base Solid RED OFF Solid GREEN* OFF OFF OFF Two RED flashes every 1.5 seconds RED F GREEN flash every 1.
Installation Guide Revolabs Fusion™ SONY INSTALLATION Requires special cable of XLR connector to 3.5 mm phono connector. The Adapter does not provide phantom power or bias current so it cannot be used with condenser or electret microphones. With the microphone attached, un-mute the Adapter by pressing and releasing the Mute button (confirm by viewing flashing GREEN LED). If the microphone has an on-board mute switch, this switch must also be un-muted prior to use.
Installation Guide Revolabs Fusion™ Using the Solo XLR Microphone Wireless Adapter The Revolabs Solo™ Universal Wireless Adapter for Handheld Microphones, shown in the following figure, is connected to your existing handheld dynamic microphones for wireless freedom during open microphone meetings, Q&A sessions, classrooms, etc. 1. Mute button — press to mute, un-mute and pair microphone. 2. Rubber collar — durable and impact/strain protection. 3.
Installation Guide Revolabs Fusion™ • Tandberg Installation • • Step 1 Step 2 Plug both RCA connectors on one end of Cable C into Tandberg videostation
Installation Guide Revolabs Fusion™ Using Solo Tabletop Wireless Boundary Microphones The Solo TableTop Wireless Boundary Microphones enable multiple conference attendees to use a single microphone. The TableTop Wireless Microphone, shown on the following page, is designed to provide optimum coverage when placed on a conference room table. To configure the Tandberg system: 1. Mute button — press to mute, un-mute and pair microphone. 2. LED display — visual status for mute, un-mute, and pairing. 3.
Installation Guide Pairing Wireless Microphones to Fusion Base Station If you selected your microphones separately with the 01-8FUSION-NM or 014FUSION-NM Fusion part numbers, you must first establish a connection between your microphones to the Fusion Base Station. This is called “pairing”. Pairing creates a link with a unique electronic serial number between the Solo wireless microphone and the Fusion Base Station.
Installation Guide Using Revolabs Microphones and Microphone Adapters Use any Solo Microphone microphones with your Revolabs Solo™ Executive system: • Revolabs Solo™ Wearable Wireless Microphone • Solo Tabletop Wireless Boundary Microphone • Solo Universal Wireless Adapter for Handheld Microphone Using Revolabs Solo™ Wearable Wireless Microphone The Revolabs Solo™ Wearable Microphones, shown in the following figure, are paired to the Base Station and can be worn on the user’s shirt pocket, lapel or on a la
Installation Guide Revolabs Fusion™ Details about the Revolabs Fusion Using the Revolabs Fusion™ Charger Base Fusion Front Panel When Microphones are not in use, they should be properly inserted into the Charger Base. It is important to ensure that the system microphones are inserted fully in the base so that charging will occur. Features of the base are shown in the following figure.
Installation Guide Revolabs Fusion™ Using the Revolabs Fusion™ IR Remote Control Fusion Back Panel Phone Dial Pad Flash – phone function Vol + : increases far-end volume Call: phone off-hook (dial-tone) End: phone on-hook (hangup) Vol -: decreases far-end volume 1. 2. Power 6 RCA Plugs • AUX IN • • • • • NOTE: A fully charged battery provides approximately 8 hours of talk time AUX OUT RECORD OUT ROOM OUT CONFERENCE IN CONFERENCE OUT 3. 4. 5. 6. 7. 8. 9.
Installation Guide Revolabs Fusion™ Programming Port: DIP Switches The Fusion Base Station factory default settings are all OFF. The left Programming Port (#8, page 17) is end-user configurable: Switches 1 and 2 are used for transmit power settings (default high power), 3 and 4 for frequency mode settings (default unrestricted mode), 5 for tabletop mute behavior setting (default no tabletop master mute) and switch 6 for Auto Answer (default off).
Installation Guide Revolabs Fusion™ Programming Ports DIP Switch Used for Muting Option Programming Port Settings for Multiple Fusion Systems Setting the Mute Option There are two settings that must be adjusted when more than one Fusion system is used within a 100’ (30.5 m) foot range: frequency and transmit power level. These settings will enable several Fusion systems to be used near each other, but not interfere with each other.
