VRS-MULTI-W Wireless Video Remote for Sony Cameras and Camcorders
Precautions • Please read and follow the instructions, and keep this manual in a safe place. • Handle the unit with care. • Keep this unit away from water and any flammable gases or liquids. • Clean the unit with only a soft, dry cloth. • Make sure the item is intact and that there are no missing parts. • Do not attempt to disassemble or repair the equipment—doing so will void the warranty, and Revo will not be responsible for any damage. • All images are for illustrative purposes only.
Thank you for choosing Revo. The Revo VRS-MULTI-W is a wireless remote for Sony camcorders and point-and-shoot and mirrorless cameras when using a power-zoom lens. Enjoy smooth, hands-free video operation with electronic control between wide and telephoto angles. Cycle through available grid-lines or put the camera into sleep mode. Trigger single or continuous shots or lock the shutter for bulb shooting—at the touch of a button and up to 328 feet away from your camera. Specifications Radio Frequency: 2.
Overview Transmitter Remote 1 Activity indicator 2 Wrist strap mount 3 On/off switch 4 1/4-20 mount 5 Battery compartment (2 × AAA batteries) Receiver 6 On/off switch 7 Activity indicator 8 Mounting foot 9 1/4-20 socket 10 Locking wheel 11 USB Mini-B port 12 Tether mount 13 Battery compartment (2 × AAA batteries) Also Included: S2 remote cable (Multi Terminal) Transmitter wrist strap Receiver tether
1 2 3 4 5 7 6 8 9 10 11 13 12
VRS-MULTI-W Functions Locking shutter release: Press halfway to focus, and press fully to release the shutter. Slide the lock in place to keep the shutter button pressed for bulb or continuous shooting. When the camera is set to bulb, the shutter remains open with the lock engaged. When your camera's drive is set to continuous, the shutter releases continuously (speeds vary depending on camera). Sleep: Put your camera to sleep to conserve battery power, or wake your camera from sleep mode.
Pairing the Transmitter and Receiver 1. Turn on the transmitter’s power. 2. Hold the record button on the transmitter until the indicator light blinks red and green. 3. Turn on the receiver’s power. The receiver’s indicator light will blink green when the pairing is successfully completed. 4. Release the transmitter’s record button. Activity Indicator Status Indicator Light Status (steady) Standby and ready. (blinking) A button has been pressed and is active. (steady) Connection issue.
One-Year Limited Warranty This Revo product is warrantied to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.