SUPERCONNECT
SAFETY INSTRUCTIONS Please read and keep these instructions - All the safety and operating instructions should be read before this product is operated. Safety notice WARNING! Check the device before use. In the event of damage or a defect, the device must not be put into operation. Risk of injury! Risk of injury to children and people with reduced physical, sensory or mental abilities (e.g.
Operational safety Loud or unusual noises can also be a sign of a malfunction. In this case, pull the power adapter out of the socket immediately. Only touch the power adapter by the housing. Never pull the power adapter by the cable. If you are going to be absent for a long period of time or during a thunderstorm, pull the device out of the socket.
Risk of injury WARNING! Excessive sound pressure when using earphones or headphones can cause damage or loss of hearing. Listening with earphones or headphones at a high volume over a long period of time can cause damage to the user. Please check the volume before inserting or putting on earphones or headphones in your ears. Set the volume to a low value and only increase the volume enough that you still find it comfortable. Notes on the radio interface The device generates an electromagnetic field.
Remove leaking batteries from the device immediately and clean the contacts before inserting new batteries. WARNING! There is a risk of explosion if batteries are used improperly! Only use new batteries of the same type. Please never use new and old batteries together in one device. Pay attention to the correct polarisation when inserting the batteries. Never charge batteries. Batteries should only be stored in cool and dry places. Never throw batteries into fire.
TECHNICAL SUPPORT Should you encounter problems using this product, please refer to the troubleshooting section on page 40 of this owner’s guide. Alternatively, call Revo technical support on: +49 (0) 2676 / 9 52 01 01 Alternatively, e-mail support@revo.co.uk or visit the troubleshooting section of our website at: www.revo.co.
FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION Changes or Modifications not expressly approved by the party responsible could void the user’s authority to operate this device.
WARRANTY TELESTAR-DIGITAL GmbH warrants to the end user that this product will be free from defects in materials and workmanship in the course of normal use for a period of one year from the date of purchase. This guarantee covers breakdowns due to manufacturing faults and does not apply in cases such as accidental damage, general wear and tear, user negligence, modification or repair not authorised by TELESTAR DIGITAL GmbH. COPYRIGHTS AND ACKNOWLEDGEMENTS Copyright 2020 TELESTAR DIGITAL GmbH.
CONTENTS SAFETY INSTRUCTIONS............................................................................................................... 2 TECHNICAL SUPPORT .................................................................................................................. 6 ENVIRONMENTAL INFO ................................................................................................................ 6 Declaration of Conformity (RED) .....................................................................
Audio Settings ........................................................................................................................ 30 Storing Preset Stations .......................................................................................................... 30 Recalling a Preset Station ...................................................................................................... 31 BLUETOOTH MODE ...........................................................................................
WELCOME Thank you for purchasing our SUPERCONNECT radio, we are sure that it will provide you with many years of enjoyment and reliable service. SUPERCONNECT is the ultimate expression of our design and engineering philosophy, and the culmination of everything we have learnt in 10 years of award-winning product design and development. Functionalism meets craft and technology, a next-generation audio device that beats at the heart of your musical ecosystem, providing whatever soundtrack you need.
YOUR RADIO Front View 1. MODE button Press and hold to fast forward current Press to switch among Internet radio, playing track in Podcasts and Amazon Podcasts, Spotify, Amazon Music, Deezer, Music mode. DAB, FM, Bluetooth and Aux in mode. 2. 3. 4. Press and hold to save preset station. Press to display or exit menu screen. Press to recall preset station. INFO button 9. Press to view station information when a 10. Display program is playing. 11.
Rear View 1. DAB/FM antenna 4. DIGITAL OPTICAL OUT socket 2. RCA sockets 5. DC IN socket 3. AUX IN socket 6.
BATTERY REPLACEMENT The SUPERCONNECT remote control is powered by a single 3V lithium battery. Depending on usage, the battery should happily run for between 1 and 2 years. Replace the battery when button presses seem sluggish, or when the operating range appears to have reduced significantly. Replace the old battery with a new CR2025 lithium cell.
GETTING STARTED Positioning your Radio Place your radio on a flat / stable surface that is not subject to vibrations. Avoid the following locations: ◼ Where the unit will be exposed to direct sunlight. ◼ Where the unit will be close to heat radiating sources. ◼ Where the humidity is high and ventilation is poor. ◼ Where it is dusty. ◼ Where it is damp or there is a possibility of water dripping or splashing onto unit.
Volume Control Turn VOLUME knob anti-clockwise/ clockwise to decrease or increase volume level. Using Headphones You will require headphones fitted with a 3.5 mm diameter stereo plug. The Headphones socket is located at the front of unit. Headphones are not supplied with this radio. Turn down the volume before connecting headphones. Slowly raise the volume with the headphones on until you reach your desired level. Caution: long-term exposure to loud music may cause hearing damage.
SETUP WIZARD 1. For initial use, you will be invited to visit website www.frontiersmart.com/privacy to learn Privacy Policy. To continue, press SELECT button on your radio. 2. Now you will enter Setup wizard. 3. Press SELECT button to confirm “YES” to start setup. Options in the setup wizard include the following: Date/Time Set 12 or 24 hour format Auto update Synchronously update clock from the playing program you selected or set by yourself.
Note: If a password (WEP/WPA) isn’t required by your network, radio will connect to the network automatically. a. Scroll Joystick to cycle through the alphanumeric character list, press SELECT button to select an appointed character. b. Note: WEP/WPA pass codes are case-sensitive. If a wrong operation is being conducted, select to delete designated character. Note: = Backspace; means return to previous track; radio will automatically save the WEP/WPA you’ve input, so no bother to c.
INTERNET RADIO MODE 1. The display will show “Main menu” after “Setup wizard” completed. Press SELECT button to select Internet radio mode. → 2. Scroll Joystick and then press SELECT button to select a station. “Local country”: Search: It displays local stations of your current location. Enter all or part of station name to find a station. Location: Popular: Discover: Stations change according to your current location (e.g. China).
Storing Preset via remote control: 1. While a program is playing, press and hold one of Presets 1-6 button on remote control to store station/podcast directly to preset number 1 - 6. 2. Display will show “Preset stored” and then preset number “ #” will show on the display. Alternatively, 1. Press and hold FAV+ button on the remote control until display shows “Save to Preset“. 2. Scroll Joystick to select among preset numbers 1-10. 3.
PODCASTS 1. Press MODE button to select Podcasts mode. 2. Scroll Joystick and then press SELECT button to select a podcast. “Local country”: Search: Location: Discover: Podcasts change according to your current location (e.g. China). It displays local podcasts of your current location. Enter all or part of podcast name to find a podcast. Choose from the podcasts provided by any country which you choose from a list. Discovery of podcasts by country, genre or language.
Recalling a Preset Station Recalling Preset via main unit: 1. Press one of PRESETS 1-8 button on main unit to directly play preset station/podcast 1 - 8. 2. “Preset empty” will be shown if the preset station/podcast isn’t allocated. Recalling Preset via remote control: 1. Press one of Presets 1-6 button on remote control to directly play preset station/podcast 1 6. 2. “Preset empty” will be shown if the preset station/podcast isn’t allocated. Alternatively, 1.
SPOTIFY Your radio has Spotify Connect built in. Press MODE button to select Spotify mode. Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. The Spotify software is subject to third party licenses found here: www.spotify.
AMAZON MUSIC Your radio has Amazon Music built in. This enables you control the music using the UNDOK app on your mobile, tablet or PC. You’ll need an Amazon account to use Amazon Music. Play Music via UNDOK App Please refer to “Wireless Control App - UNDOK” on page 34 to learn more about how to use UNDOK app. 1. Download Amazon Music app and UNDOK app for your smartphone or tablet (iOS or Android). 2. Start UNDOK app on your smartphone or tablet using the same WiFi network as your radio. 3.
DEEZER Deezer comes preinstalled on your radio. Tracks, playlists and other programmes available from Deezer can be selected using your radio or UNDOK app, and enjoy music on your radio. You’ll need a Deezer account. Learn more at www.deezer.com. Play Music on Your radio 1. Press MODE button to select Deezer mode. 2. You’re require to input Deezer username and then password as follows: → Alternatively, use UNDOK app to login. 3.
DAB MODE Selecting DAB Mode 1. Press MODE button to select DAB mode. 2. For initial use, radio will carry out a full scan and store stations list in memory. 3. Once the scanning is completed, the DAB/DAB+ stations will be displayed in alphanumeric order. Scroll Joystick to select you desired station and then press SELECT button to broadcast. Note: if no DAB/DAB+ signal is found in your area, it may be necessary to relocate your radio to a stronger signal area. Selecting another Station 1.
Manual Tune This can help you when adjusting your antenna or when adding stations that were missed while auto tuning. 1. Press MENU button, scroll Joystick to select “Manual tune”, and then press SELECT button to confirm, the display will show the channel number and frequency. 2. Scroll Joystick to select the channel you wanted, and then press SELECT button to confirm.
Now Playing Information DAB/DAB+ stations broadcast additional information. Press INFO button repeatedly while a program is playing to view information through DLS (Dynamic Label Segment), Ensemble, Program Frequency, Signal Quality, Signal Strength, Bitrate, Codec, Channel and Date. Showing Signal Strength While you selected signal strength, a signal bar with the strength of the current station will show on the display. The indicator on the signal bar shows the minimum acceptable signal level.
Recalling a Preset Station Recalling Preset via main unit: 1. Press one of PRESETS 1-8 button on main unit to directly play preset station 1 - 8. 2. “Preset empty” will be shown if the preset station isn’t allocated. Recalling Preset via remote control: 1. Press one of Presets 1-6 button on remote control to directly play preset station 1 - 6. 2. “Preset empty” will be shown if the preset station isn’t allocated. Alternatively, 1.
FM MODE Selecting FM Mode 1. Press MODE button to select FM mode. 2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise, the last listened FM station will be selected. 3. To manually scan, while FM frequency shows up, scroll Joystick up/down to change frequency by 0.05MHz per step. 4. To automatically scan, while FM frequency shows up, press SELECT button, your radio will automatically search until it reached the next available station.
1. While a program is playing, press and hold one of PRESETS 1-8 button on main unit to store station directly to preset number 1 - 8. 2. Display will show “Preset stored” and then preset number “ #” will show on the display. Storing Preset via remote control: 1. While a program is playing, press and hold one of Presets 1-6 button on remote control to store station directly to preset number 1 - 6. 2. Display will show “Preset stored” and then preset number “ #” will show on the display.
BLUETOOTH MODE Pair the unit with a Bluetooth device to listen to music: 1. Press MODE button to select Bluetooth mode. 2. Press MENU button, and then scroll Joystick to select “Pair”, press SELECT button to confirm. 3. The display will show “Bluetooth Discoverable”. 4. Activate your Bluetooth device and look for your radio’s model number “Revo SuperConnect” in the Bluetooth list. Select it. 5. Display will show “Connected” when connection is successful. 6.
AUX IN MODE AUX IN allows for quick and easy connection to an MP3 player or other external audio sources. 1. Before connecting to the mains socket, use a 3.5mm audio cable (not supplied) to connect to your external audio device through the AUX IN socket at the rear of unit. 2. Connect power adapter to mains socket, press button to switch unit on. 3. Press MODE button to select Auxiliary Input mode. 4. In Aux in mode, you may operate your audio device directly for playback features. 5.
WIRELESS CONTROL APP - UNDOK UNDOK App enables you use your smartphone (or tablet) to wirelessly control your radio when both devices connecting to same network. 1. Download UNDOK app from App Store (iOS) or Google Play (Android) on your smartphone or tablet. 2. Start UNDOK app, making sure your radio and smartphone are connected to same WiFi network. 3. All available devices will be listed. Tap your radio “Revo SuperConnect” to connect to. 4. Now playing screen is shown.
8. To ensure you can use UNDOK app in all modes especially in non-internet modes (i.e. in DAB, FM, Bluetooth or Aux in mode) you need to select Main menu - System settings Network - Keep network connected - YES. This also allows you to wake the radio from standby by using your UNDOK app. Note: If unattended to use radio for long periods of time, e.g. overnight, while on holiday or while out of the house, select “NO” to avoid unnecessary energy consumption.
GENERAL OPERATION Setting Sleep This feature enables your radio to switch to standby mode by itself after a set sleep time. 1. Press MENU button - Main menu - Sleep, and then press SELECT button to confirm. 2. Scroll Joystick to select a sleep time, and then press SELECT button to confirm. The sleep icon and sleep time will show on the display. The sleep time options: Sleep OFF/15/30/45/60 MINS. 3.
Setting Equaliser This feature enables you to choose a sound equalization profile. Each of the equalization setting will change the tone of the sound from your radio when selected. 1. Press MENU button - Main menu - System settings - Equaliser, and then press SELECT button to confirm. 2. Scroll Joystick and then press SELECT button to select a profile. The equalization profile options: Normal/Jazz/Rock/Movie/Classic/Pop/News/My EQ. 3.
Setting Time/Date 1. Press MENU button - Main menu - System settings - Time/Date, and then press SELECT button to confirm. 2. Scroll Joystick to select options, and then press SELECT button to confirm the setting. Set Time/date: Auto update: Set format: Set timezone: Daylight saving: 3. Manually set-up both Time and Date “Update from DAB”, “Update from FM”, “Update from Network” or “No update” 12 or 24 hour format Select a timezone (Only available when auto update from Network.
1. 2. 3. Press MENU button - Main menu - System settings - Software update, and then press SELECT button to confirm. Scroll Joystick to select “Auto-check setting”, your radio will check periodically for new version software. Scroll Joystick to select “Check now”, your radio will now to check new version software and automatically upgrade the detected new version software.
TROUBLESHOOTING If a problem occurs, it may often be due to something very minor. The following table contains various tips. Problem Solution No Power. ⚫ Ensure the mains cable is properly connected. ⚫ Make sure that the unit is turned on. ⚫ The unit may freeze up during use. Switch the unit off The unit does not respond when pressing any buttons. Cannot find my network. Poor radio reception. and then on again to reset it. ⚫ Make sure the Wi-Fi router is plugged in and working.
SPECIFICATIONS Model: SuperConnect DAB/DAB+: 174 - 240MHz FM: 87.5 - 108MHz Radio Frequency: Bluetooth: 2.402 - 2.480GHz WIFI: 2.412 - 2.462GHz, 5.150 - 5.250GHz Maximum radio-frequency power transmitted: Speaker Output Power: Bluetooth: 4dBm WIFI: 20dBm 15W rms Ecodesign Information Power Consumption of Operation Mode: Information on Power Power Consumption Consumption of Standby Mode: Network Standby Power Consumption: 23.
Technical Data of the supplied Power Supply Manufacturer: TELESTAR-DIGITAL GmbH, Am Weiher 14, 56766 Ulmen, Deutschland Model number: GPE024L-180133-Z Input voltage: AC 100-240V Input frequency: 50/60Hz Output voltage: DC 18.0V Output current: 1.33A Output power: 23.94W Average efficiency in operation: 87.04% Low load efficiency (10%): 82.95% No-load power consumption: 0.
