Operation Guide

ManualsBrandsReverie ManualsElectronicsREMOTE CONTROL

Remote Control Operation Guide

HEAD AND FOOT

ADJUSTMENTS (A,B)

Adjusts the head and foot sections

to the desired positions.

FLAT (C)

Returns both head and foot to the

at position.

MEMORY POSITION PRESETS (D)

You can store 4 personalized

memory positions. Press and hold

the Memory button for 5 seconds

until the LED light ashes 3 times to

store the setting. To recall a Memory

Position, press the corresponding

button.

NOTE: Do not hold the memory

position for more than 5 seconds

or the setting will overwrite.

ZERO GRAVITY (E)

Allows your legs to be lifted to a

position slightly above the chest,

which enables blood ow to easily

circulate back to the heart, thus

reducing stress and fatigue.

ANTI SNORE (F)

Raises the HEAD slightly for easier

breathing.

HEAD AND FOOT MASSAGE

CONTROLS (G,H)

Turns on the corresponding

massage unit and slowly increases

or decreases massage intensity.

NOTE: The lowest setting

will turn off the corresponding

massage unit.

NOTE: The massage feature is

designed to automatically shut

off after 30 minutes of continuous

use.

A. RAISE & LOWER HEAD SECTION

B. RAISE & LOWER FOOT SECTION

C. FLAT

D. MEMORY POSITIONS

E. ZERO GRAVITY

F. ANTI - SNORE

G. HEAD MASSAGE INTENSITY

H. FOOT MASSAGE INTENSITY

I. STOP MASSAGE

J. WAVE MASSAGE PATTERN

K. NIGHTLIGHT ON/OFF

MASSAGE STOP (I)

Press to stop all massage features.

WAVE MASSAGE PATTERN (J)

Turns on both head and foot massage

motors to one of 2 different wave

presets.

NIGHTLIGHT ON/OFF (K)

Toggle the lightbulb button for on/off

functions.

NOTE: Any control button on the

remote will interrupt and stop the

FLAT, ZERO-G, Anti-Snore and

Memory Position presets.

REMOTE LOCKOUT FEATURE

(A,C)

We created the remote lockout

feature to help owners prevent

unintended use of the base.

Activating Remote Lockout

At the same time, press and hold

the HEAD UP and FLAT buttons

for 3 seconds. The LED will ash

twice to indicate activation. Pressing

any buttons on the remote while

in lockout mode will result in no

movement from the power base.

Deactivating Remote Lockout

Repeat the same process, press

and hold the HEAD UP and FLAT

buttons at the same time for 3

seconds. The LED will ash twice

to indicate deactivation. The remote

and power base will work normally.

Summary of content (2 pages)

PAGE 1
Remote Control Operation Guide HEAD AND FOOT ADJUSTMENTS (A,B) Adjusts the head and foot sections to the desired positions. FLAT (C) Returns both head and foot to the flat position. MEMORY POSITION PRESETS (D) You can store 4 personalized memory positions. Press and hold the Memory button for 5 seconds until the LED light flashes 3 times to store the setting. To recall a Memory Position, press the corresponding button.
PAGE 2
ADDITIONAL REMOTE FEATURES: • The buttons are back-lit when a button is pressed, to aid the visibility of the remote in low light environments. • Customers can control the remote without facing the receiver (best transmission range is within 30 feet or 10 meters). • This Base uses a RF (Radio Frequency) remote control system. • The included remote is already paired with your power base, so should be operational right out of the box. Please test some of the features to ensure functionality.