Operation Guide

ManualsBrandsReverie ManualsElectronicsREMOTE CONTROL

Remote Control Operation Guide

HEAD AND FOOT

ADJUSTMENTS (A,C)

Adjusts the head and foot sections

to the desired positions.

FLAT (B)

Returns both head and foot to the

at position.

ZERO GRAVITY (D)

Allows your legs to be lifted to a

position slightly above the chest,

which enables blood ow to easily

circulate back to the heart, thus

reducing stress and fatigue.

MEMORY POSITION PRESETS

(E,F)

You can store 2 personalized

memory positions. Press and hold

the Memory button for 5 seconds

until the LED light ashes 3 times to

store the setting. To recall a Memory

Position, press the corresponding

button.

NOTE: Do not hold the memory

position for more than 5 seconds

or the setting will overwrite.

ANTI SNORE (G)

Raises the HEAD slightly for easier

breathing.

HEAD AND FOOT MASSAGE

CONTROLS (H,J)

Turns on the corresponding

massage unit and slowly increases

or decreases massage intensity.

NOTE: The massage feature is

designed to automatically shut

off after 30 minutes of continuous

use.

MASSAGE STOP (I)

Press to stop all massage features.

A. RAISE & LOWER HEAD SECTION

B. FLAT

C. RAISE & LOWER FOOT SECTION

D. ZERO GRAVITY

E. MEMORY POSITION 1

F. MEMORY POSITION 2

G. ANTI - SNORE

H. HEAD MASSAGE INTENSITY

I. STOP MASSAGE

J. FOOT MASSAGE INTENSITY

K. FULL BODY MASSAGE

L. WAVE MASSAGE PATTERNS

NOTE: The lowest setting will turn

off the corresponding massage unit.

FULL BODY MASSAGE (K)

Turns the Head and Foot Massage

units on at the same time.

WAVE MASSAGE PATTERN (L)

Turns on both head and foot massage

motors to 3 different wave presets.

NOTE: Any control button on the

remote will interrupt and stop the

FLAT, ZERO-G, Anti-Snore and

Memory Position presets.

REMOTE LOCKOUT FEATURE

(A,B)

We created the remote lockout

feature to help owners prevent

unintended use of the base.

Activating Remote Lockout

At the same time, press and hold

the HEAD UP and FLAT buttons

for 3 seconds. The LED will ash

twice to indicate activation. Pressing

any buttons on the remote while

in lockout mode will result in no

movement from the power base.

Deactivating Remote Lockout

Repeat the same process, press

and hold the HEAD UP and FLAT

buttons at the same time for 3

seconds. The LED will ash twice

to indicate deactivation. The remote

and power base will work normally.

Summary of content (2 pages)

PAGE 1
Remote Control Operation Guide HEAD AND FOOT ADJUSTMENTS (A,C) Adjusts the head and foot sections to the desired positions. FLAT (B) Returns both head and foot to the flat position. ZERO GRAVITY (D) Allows your legs to be lifted to a position slightly above the chest, which enables blood flow to easily circulate back to the heart, thus reducing stress and fatigue. MEMORY POSITION PRESETS (E,F) You can store 2 personalized memory positions.
PAGE 2
ADDITIONAL REMOTE FEATURES: • The buttons are back-lit when a button is pressed, to aid the visibility of the remote in low light environments. • Customers can control the remote without facing the receiver (best transmission range is within 30 feet or 10 meters). • This Base uses a RF (Radio Frequency) remote control system. • The included remote is already paired with your power base, so should be operational right out of the box. Please test some of the features to ensure functionality.