User Manual

JAMMA Harness w/.187” Quick Disconnects
PN: RA-WIRE-HARNESS
©RETROARCADES.US | Holland Computers Inc. | 440-365-9906| www.hollandcomputers.com
Every joystick and button micro switch must be connected in the same
manner. Ground wire to the ground loop and the appropriate JAMMA wire
to the normally open terminal as illustrated.
In the table below X indicates that there is no wire present. If you need any
of these functions, you will need to solder in your own wire.
FUNCTION WIRE COLOR PIN PIN WIRE COLOR FUNCTION
GROUND BLACK A 1 BLACK GROUND
GROUND BLACK B 2 BLACK GROUND
+5VDC RED C 3 RED +5VDC
+5VDC RED D 4 RED +5VDC
-5VDC GREEN E 5 GREEN -5VDC
+12VDC YELLOW F 6 YELLOW +12VDC
KEY SLOT X G 7 X KEY SLOT
COIN COUNTER 2 ORANGE H 8 ORANGE COIN COUNTER 1
LOCKOUT COIL 2 X J 9 X LOCKOUT COIL 1
SPEAKER - WHITE K 10 WHITE SPEAKER +
OPTIONAL P2 FIRE 6 BLACK M 11 BLACK OPTIONAL P1 FIRE 6
VIDEO GREEN GREEN N 12 RED VIDEO RED
VIDEO V. SYNC WHITE P 13 BLUE VIDEO BLUE
SERVICE RED R 14 BLACK VIDEO GROUND
TILT X S 15 ORANGE TEST
COIN 2 GREEN T 16 GREEN COIN 1
P2 START BROWN U 17 BROWN P1 START
P2 UP RED V 18 RED P1 UP
P2 DOWN ORANGE W 19 ORANGE P1 DOWN
P2 LEFT YELLOW X 20 YELLOW P1 LEFT
P2 RIGHT GREEN Y 21 GREEN P1 RIGHT
P2 FIRE 1 BLUE Z 22 BLUE P1 FIRE 1
P2 FIRE 2 VIOLET AA 23 VIOLET P1 FIRE 2
P2 FIRE 3 GRAY BB 24 GRAY P1 FIRE 3
P2 FIRE 4 WHITE CC 25 WHITE P1 FIRE 4
P2 FIRE 5 PINK DD 26 PINK P1 FIRE 5
P2 FIRE 6 BLACK EE 27 BLACK P1 FIRE 6
GROUND BLACK FF 28 BLACK GROUND
SOLDER SIDE COMPONENT (PARTS) SIDE