SCAN RT45P Two Way Radio USER'S MANUAL
TO CUSTOMERS Thank you very much for using our two-way radios. This product has a newly developed function menu and humanism operation design, making it easy to use, it will meet your requirement with the compact size and reasonable price. EU Importer: Germany Retevis Technology GmbH Address: Uetzenacker 29,38176 wendeburg For downloading further resources: Brochures, Software/Firmware, Manual etc, Pls contact your direct reseller first OR go to website retevis.
CONTENTS Features------------------------------------------------------------------------------------------------- 01 Buttons and functions ----------------------------------------------------------------------------- 01 LCD Display-------------------------------------------------------------------------------------------- 01 Operations---------------------------------------------------------------------------------------------- 01 Reset function--------------------------------------------------------------
Features (FRS) 22 Channel VOX Function Roger Beep Backlit LCD Display Battery Charger Battery Level Meter Room Monitor NOAA Dual Watch Keypad Lock Channel Monitor Channel Scan LED Torch Battery Low Alert Power Source: 6 AA NIMH Rechargeable Batteries 121Sub-Codes(38 CTCSS Codes&83 DCS Codes) 10 Selectable Call Tone Alerts Earphone jack for Optional Headset Buttons and functions Antenna LED Light PTT Button LED Torch/SOS Button Call Button NOAA/Monitor Button Volume/Channel Down Button
Turning Your Radio On And Off To turn on the radio press and hold the POWER ON/OFF button until a channel number appears and the radio Beeps . Press and hold POWER ON/OFF button until the display goes blank to turnoff. Monitor Function lt is good etiquette to monitor the channel activity before any transmission to ensure that you do not interrupt other users already on the channel. Press and hold “Mon” to check for current channel activity. If there is nothing except static, the channel is clear for use.
- lf you activate scan while your code is set to 0, then the radio will check for any activity on each channel, regardless of the code in use on that channel. - lf you activate scan while the code is set on 1 to 121, then the radio will check for any activity on each channel, except the code0 in use on that channel. - While the radio is scanning, Scan icon will display and the radio will scroll through the channels.
Note: when the voice / noise in the monitored room continues for more than 60 seconds, the monitoring radio stop monitoring for 5 seconds, and resumes. To set Room Monitor sensitivity 1. Press the Menu/Power button until the Room Monitor sensitivity icon flashes and the current sensitivity level is displayed. 2. Press the “Up” or “Down” button to change the setting. 3. Choose one of the following: a. Press the Menu/Power button to enter the new setting and proceed to other functions. b.
2 x Belt Clip 1 x Type-C Charging Cable 6 x 1000mAh AA NiMH Rechargeable Batteries 1 x RT45P User Manual Specification Table (FRS) GENERAL TRANSMITTER Frequency Rang 462.5500~467.7125 MHz Output power Channel capacity 22 CH Working Voltage 3.7V DC RECEIVER RF sensitivity ≤0.2μV Adjacent channel power ≥65dB Intermodulation ≥55dB TX current ≤1200mA Audio output >500m W Antenna impedance 50 Ω Spurious radiation ≤7.
RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE FOR PORTABLE TWO-WAY RADIOS ATTENTION! Before using this radio, read this guide which contains important operating instructions for safe usage and rf energy awareness and control for compliance with applicable standards and regulations. This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. RF energy, which when used improperly, can cause biological damage.
•This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
•Mobile Device, during operation, the separation distance between user and the antenna subjects to actual regulations, this separation distance will ensure that there is sufficient distance from a properly installed externally-mounted antenna to satisfy the RF exposure requirements.
facilities (Pacemakers, Hearing Aids and Other Medical Devices) may be using equipment that is sensitive to external RF energy. •Turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions. Protect your hearing: • Use the lowest volume necessary to do your job. • Turn up the volume only if you are in noisy surroundings. • Turn down the volume before adding headset or earpiece.
Guarantee Model Number: Serial Number: Purchasing Date: Cut along this line Dealer: Telephone: User’s: Telephone: Country: Address: Post Code: Email: Remarks: 1.This guarantee card should be kept by the user, no replacement if lost. 2.Most new products carry a two-year manufacturer’s warranty from the date of purchase. Further details, pls read http://www.retevis.com/after-sale/ 3.The user can get warranty and after-sales service as below: 4.
6KHQ]KHQ
装钉：胶合钉
