RB23 Wakie Talkie User’s manual
To user: Welcome to shopping our two way radios. We believe our product can bring great convenience to your life and work. Retevis two way radios are manufactured by using the advanced technologies, and We hope you will be satisfied with the quality and functionality of this product. This two way radio can give you a more convenient, fast, and reliable usage experience. Warning: ●Please read this manual carefully before using this transceiver.
CONTENT Unboxing and checking------------------------------------------------------------------------------------------- 01 Getting Start----------------------------------------------------------------------------------------------------------- 01 Familiar with the radio--------------------------------------------------------------------------------------------- 02 Basic operations----------------------------------------------------------------------------------------------------- 03 QT (50)----------------
Unboxing and checking Carefully unpack the transceiver. We recommend that you identify the items in the following table before discarding the packing material. If any item is missing or has been damaged during shipment, please contact the deliveryman or your seller. 1. Accessories list Enclosed Accessories Quantity Battey 1 Clip 1 Adapter 1 Desk charger 1 Strap 1 Manual 1 Getting Start Notice: ●Please do not charger for a long time.
To remove the battery, please ensure that the radio is off, and then push the battery latch button at the bottom of the radio to the right. Remove the upper part of the battery from the radio and remove the battery. Insert the top terminal vertexes of the battery into the slots in the radio battery slot, then press the bottom of the battery until hear the snap sound. 6. Install the strap. Slip the radio strap into the ring in the middle of the radio. 5. Install/Remove the back clip.
PTT SP/MIC jack/programming cable jack PF1 PF2 Battery Basic operations 1. Indicator Red light in transmission, and green light in reception. 2. Channel knob. Rotate channel knob to switch the channel 1~30. Counterclockwise rotation reduces the channel number, clockwise rotation increases the number of channels. The prompt alert ring when the channel is free. 3. Power ON/OFF knob/Volume adjust knob Clockwise rotation to turn on the radio, counterclockwise rotation and hear a click to turn off the radio.
caused by continuous transmission of the radio. If the transmission time exceeds the limit time, the radio will stop transmitting and prompt alert. Release [PTT] return to receive condition. 8. Scan When channels are set to scannable, rotate channel knob to one channel enter the scanning. If the current channel is 16, the radio can detect the signal from channel 1~30 (Scan function can be customized for each channel in the programming software).
DQT (116*2) D050N D017N D023N D025N D026N D031N D032N D036N D043N D047N D051N D053N D054N D055N D065N D071N D072N D073N D074N D114N D115N D116N D122N D125N D131N D132N D134N D135N D143N D145N D152N D155N D156N D162N D165N D172N D174N D205N D212N D217N D223N D225N D226N D243N D244N D245N D246N D251N D252N D254N D255N D261N D263N D265N D266N D271N D274N D305N D306N D311N D315N D325N D331N D332N D343N D345N D346N D351N D356N D364N D365N D37
5 462.6625 462.6625 5W 12.5KHz 136.5 6 462.6875 462.6875 5W 12.5KHz 141.3 7 462.7125 462.7125 5W 12.5KHz 146.2 8 467.5625 467.5625 0.5W 12.5KHz D243N 9 467.5875 467.5875 0.5W 12.5KHz D032N 10 467.6125 467.6125 0.5W 12.5KHz D047N 11 467.6375 467.6375 0.5W 12.5KHz D051N 12 467.6625 467.6625 0.5W 12.5KHz D053N 13 467.6875 467.6875 0.5W 12.5KHz D065N 14 467.7125 467.7125 0.5W 12.5KHz D116N 15 462.5500 462.5500 5W 12.5KHz 123 16 462.5750 462.
RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE FOR PORTABLE TWO-WAY RADIOS ATTENTION! Before using this radio, read this guide which contains important operating instructions for safe usage and rf energy awareness and control for compliance with applicable standards and regulations. This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. RF energy, which when used improperly, can cause biological damage.
conditions: (Other devices are applicable) (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: •(If applicable)This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
IC Requirements: Licence-exempt radio apparatus This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
time, or less, is important because the radio generates measurable RF energy exposure only when transmitting in terms of measuring for standards compliance. •Transmit only when people outside the vehicle are at least the recommended minimum lateral distance away from a properly installed according to installation instructions, externally mounted antenna.
Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect. Avoid Burns Antennas •Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with the skin when the radio is in use, a minor burn can result.
Guarantee Model Number: Serial Number: Purchasing Date: Cut along this line Dealer: Telephone: User’s: Telephone: Country: Address: Post Code: Email: Remarks: 1.This guarantee card should be kept by the user, no replacement if lost. 2.Most new products carry a two-year manufacturer’s warranty from the date of purchase. Further details, pls read http://www.retevis.com/after-sale/ 3.The user can get warranty and after-sales service as below: 4.
Shenzhen Retevis Technology Co.,Ltd. Add: 7/F, 13-C, Zhonghaixin Science&Technology Park, No.12 Ganli 6th Road, Jihua Street, Longgang District, Shenzhen, China Web: www.retevis.com E-mail: kam@retevis.com Facebook: facebook.