NR10 USER’S MANUAL
Contents Warning -------------------------------------------------------------------------------01 Charging Precautions --------------------------------------------------------------01 Technical Parameters --------------------------------------------------------------02 Detail -----------------------------------------------------------------------------------02 Function Operation-------------------------------------------------------------------03 Factory Settings -------------------------------------------
NOTE: Please read this manual carefully before using this walkie-talkie. · Do not charge this walkie-talkie in areas where flammable, explosive and radio communication is prohibited (e.g. gas stations, petrol stations, airports, etc.). · Please do not operate this walkie-talkie without a license in areas where government laws prohibit it. · Please make sure the walkie-talkie is protected from sunlight and avoid placing it near any heating equipment.
Technical parameters Technical Specifications 1 2 3 4 5 6 7 8 9 10 11 Frequency range Output power Narrow width channels Working voltage Antenna impedance Charging current Battery capacity Operating temperature Receiving sensitivity Audio output power FRS High：2W Low：0.5W 12.5KHz 16CH 3.7V DC 50Ω 300mA 1200mAh -10℃ ~ +50℃ ≤0.
Function operation 1. Power on/off 1.1 Turn the power switch clockwise to hear a "ka" to turn on the power. 1.2 Turn the power switch counterclockwise to hear a "ka" to turn off the power. 2. Volume adjustment 2.1 In the receiving state, turn the volume/power switch clockwise to increase the volume. 2.2 In the receiving state, turn the volume/power switch counterclockwise to decrease the volume. 3. Transmitting/Receiving 3.
(2) When there are less than 2 scannable channels, the intercom cannot scan. (3) If you do not want to enter the scan in 16 channels, please select "Scan Add" for each channel as "No". 11. Transmit time limit function In order to prevent some users to occupy the same channel communication for a long time, users can set to open the transmitting time limit function.
RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE FOR TWO-WAY RADIOS Before using this radio, read this guide which contains important operating instructions for safe usage and rf energy awareness and control for compliance with applicable standards and regulations. •User instructions should accompany the device when transferred to other users. •Do not use this device if the operational requirements described herein are not met.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. CE Requirements: For the warning information of the frequency restriction, please refer to the package.
Avoid Choking Hazard Small Parts. Not for children under 3 years. Turn off your radio power in the following conditions: •Turn off your radio before removing (installing) a battery or accessory or when charging battery. •Turn off your radio when you are in a potentially hazardous environments: Near electrical blasting caps, in a blasting area, in explosive atmospheres (inflammable gas, dust particles, metallic powders, grain powders, etc.).
To reduce risk •Pull by the plug rather than the cord when disconnecting the charger. •Unplug the charger from the AC outlet before attempting any maintenance or cleaning. •Contact Retevis for assistance regarding repairs and service. •The adapter shall be installed near the equipment and shall be easily accessible Approved Accessories •This radio meets the RF exposure guidelines when used with the Retevis accessories supplied or designated for the product.
Guarantee Model Number: Serial Number: Purchasing Date: Dealer: User’s Name: Country: Post Code: Telephone: Telephone: Address: Email: Remarks: Cut along this line 1.This guarantee card should be kept by the user, no replacement if lost. 2.Most new products carry a two-year manufacturer’s warranty from the date of purchase. Further details, pls read http://www.retevis.com/after-sale/ 3.The user can get warranty and after-sales service as below: ·Contact the seller where you buy.
Shenzhen Retevis Technology Co.,Ltd. 7/F, 13-C, Zhonghaixin Science&Technology Park, No.12 Ganli 6th Road, Jihua Street, Longgang District, Shenzhen, China Web:www.retevis.com E-mail:kam@retevis.com Facebook:facebook.
说明书要求 尺寸：120*160mm 印刷：黑白印刷 装订：胶黏订 纸张材质：双胶纸 本页无需印刷
